วีดีโอ

Business?? I highly doutb you have a legit business. No business registration, no license, no ein, no insurances. Just a regular joe blow handyman hack.

Awesome video,GOD BLESS

Preventative ideas to do before things get slow: *Accumulate assets( things that will make you money) ex. Vehicles for renting out, tools for renting out, space for renting out, etc. * Save money. * Start a aide hustle

It took me and my buddy 12 hours in 1 day to install this same gazebo in 115 degree weather. Me and him are both experienced installers and were expecting it to take us maybe 5 hours max . Boy were we wrong lol , definitely up charging for the next one . And peeling that blue skin on the sheets took way too much time

Where are you located? We just bought the gazebo and need it assembled. I live near Reading, PA

Set the drill to hammer we've all done it lol

an interesting idea for a repair. I like to use those wire brush cups to remove old solder from pipes that hook up to a drill they make it nice and clean to solder or use other fittings.

Yes, you can repair the cut, but if you had done a little research, you'd found that you didn't have to do that. Pretty much all tub inserts/vanity covers are simply held together with caulking/bonding of some sort.

I just love when blow and go's build something in a way that it seems they decided no problem would ever arise down the line.

I'm having trouble getting the fourteen foot roof panel square.Any suggestions

No insulation?

you are a wannabe handyman. front panel comes off. you might have to move the vanity no big deal. next you needed to use a different faucet. you dont cut the support of the tub. it had single handles and spout so use a single handle and spout.

I have a faucet that is located on the upstairs, and to access it, I would have to pull the tub or go through an exterior wall. Is there any easier way to repair this type of faucet?

Plumber is very expensive these days and most of the problems are caused by building inspectors.That should have never happened.

Hack

In order to give context to the price, it would be helpful to know what specific market or what kind of market you are in. With $1350 you are losing money in New York, but maybe over-charging in some rural market.

Man, I got fibreglass powder all over watching this video.

Dude that looks 😍

Being that the bottom of the 3 cabinets on the right was the same height, you could've put a board under them, 2x4 or 4x4 and jacked them up from the middle as 1 unit & then another jack for the cabinet on the left (maybe a board under there too). Either way you did a good job & that looked like a frustrating pain in the a Nice job dude !!

Great job. I'm very talented like yourself but I would have never tackled this job especially alone. You get an a+

It's not that a plumber couldn't do this, they just don't want to because it involves some extra work

Looks so frustrating

Idk I would have just piped around the support now you risk a crack with your warranty labor.

Mold there’s dangerous mold spores everywhere in there omg

😅 you made a mess Bro. That whole panel is the access panel 😂 Made your work looks expensive and ruin the panel with an ugly hole with a cover😂

No!!!! don’t cut it just remove the caulk

I do fix those are tub tile like a tick granite they have always access to fix that tub faucet the whole piece is removable

That was the problem, I really like working, using my hands however because I didnt want the job to slip I always try to make my price lower compared to others as a handyman, as well as thinking about how much profit I'm going to make. Thats what is keeping me counting in the same spot. Its really hard for me i have a family and two kids make pray for me.❤

I had this problem with the Delta system all I did was buy a new trim kit went from chrome to antique bronze no plumbing required!

Florida is loaded with cultered marble tubs like this. The front panel comes off. Cut the caulk join. There is always a possibility the panel will break. Especially if it had a hair line crack when first installed........ive done hundreds of these in south west Florida....... that repair panel looks like ASS!!!!!!!! And how do you think the moen faucet got intalled in the first place????. It wasnt installed on the tub before it was set. DUH!!!!

I’ve noticed two things. you weakened the structure by cutting that “ridge”, ( maybe the whole bathtub is sturdy enough) you placed an access panel when (maybe with two more hours of work) you could have taken off the hole front panel. So yes, you made the job and it is not bad, but there is room for improvement.

That's utube for you make you fuk something up

Wtf!😂 I’m sorry my guy but this was horrible. Definitely not a professional way of doing this type of repair…folks please don’t think this was the correct way 🤦‍♂️ Love the video though

Boy that will look like shit !!!

Glue 3 more panels along the skirt and give it that decorative look

Where ever you are in this video, is there a maximum you can charge PER job as a handyman? Where I live it's $500 per job and it has to be completed in one attempt, not multiple attempts at $500 each time. Many people don't know that here.

Front comes off!

Yes the front panel can come off but looking at this situation . It was the best cost solution

Tough time. I guess that bigger tiles might be easier?

Never could understand why people make things like this so inaccessible. It's just a matter of time before the faucet will need some maintenance.

great work

Very nice job young man.

...and you had already addressed the name issue. Please ignore my prior comment.

They could have 3 squares in the front to make it decorative. The hoses were kinked a bit tight. I would have used longer hoses and looped.

We need to come up with a different title for those like you who do Handyman+ work. To many people believe the word "handyman" means the neighborhood nice guy will do the work for small dollars. We have plumbers, electricians, contractors who people consider to be "professional". We need a single word that best describes professional handypeople. Chatgpt offered up Tradesman, Craftsman, Technician...what are your thoughts?

Bro took forever to get to the point

Why did u cut the corner gusset. It is part of the tub structure. Just lengthen the pipe

What kind of wrench did you use? Link?

Yeah bro, that whole side your cutting on is a access panelwhole thing ehpuld pop off thats how there made