วีดีโอ

Iam glad it was helpful. Thank you for your comment.

You’re welcome 🙏.

Thank you 🙏 for the kind words I appreciate it.

I do the count method because I like to adjust the spray gun depending on the kind of clear coat iam spraying. That helps me keep track of the fluid output depending on the viscosity of the clear coat.

@@J.Lulo_ I’ve set up guns that way for 30+ years, without issue. Comes down to spray technique also. So many painters don’t realize the distance they should be from the panel for perfect atomization. Most I see are too far out and creates issues with runs. You must perfect your technique with the guns you use and determine the distance from the panel and how fast or slow you need to move. Not a fan of DV1 because it’s too slow for my liking. I can spray with them, but just comes down to personal preference and what feels best for me.

I agree 💯 percent brother.

Thank you 🙏 for the kind words I appreciate it. Good luck with your project.

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the support triggerman I appreciate it. You have some pretty good videos yourself. I will definitely be subscribing to your channel as well.

@@J.Lulo_ thank you my man support goes both ways 🫡

Thanks 🙏 for the kind words I appreciate it.

The sealer I used in the video isn’t available so I sent you a link to a comparable sealer. Sealer amzn.to/3WtGak6 Hardner amzn.to/3WvGM8Q

Thank you 🙏 for the kind words I appreciate it

I found this video in my archives and figured why not post it. There might be some new subscribers that haven’t seen some of my older videos and maybe this one will motivate them to check them out. I wish all my subscribers were as supportive as you. I appreciate you brother.

That’s true.

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the kind words I appreciate. And thank you 🙏 for subscribing I appreciate it.

Thank you 🙏 for the kind words I appreciate it. Iam glad my videos are helping you.

Thank you 🙏 for the support. Iam going to try to do my best to keep making instructional videos for you guys. I appreciate you, thank you 🙏.

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the kind words I appreciate it.

It’s definitely not easy but when you have the right skills, resources and tools it’s “easier” than if you didn’t have it. It’s still hard work but somebody’s gotta do it.

You spray the blender right after the second coat of clear.

@@J.Lulo_ Thx. I'm assuming it will also do the same with single stage urethane?

Yes it should.

Thank you 🙏 for the kind words I appreciate it.

Here’s a link these aren’t the same as the once that I used in the video but they have the same mix ratios. Link👉amzn.to/3zxfGp0

Thanks 🙏 for the kind words I appreciate it.

I mentioned adding hardener to the primer and the clear coat.

Yeah it’s better to laugh than get mad.

Here’s a link to the Clear coat I use. Link👉amzn.to/3znNHrI

@@J.Lulo_ thank you!!!

Your welcome 🙏

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the kind words I appreciate it. And yes can ask me for advice anytime you want. Iam here to help. Yes I have IG but I don’t spend a lot of time on IG but if you have questions just hit me up here on TH-cam. Here’s my instagram if you want to go there to DM instagram.com/j.lulo?igsh=OHkycGl6b2Y4YzVp&

Thank you 🙏 for the support I appreciate it so much. And thanks 🙏 for the super thanks 🙏 it really helps. I appreciate it.

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the kind words I appreciate it.

Thank you 🙏 for the kind words I appreciate it. And to answer your question, you can apply the blender right after your last coat of clear.

Right after you finish applying your last coat of clear coat.

Thank you 😊 so much for the support I appreciate it.

Why what do you need?

I would start small and just do the bumpers first to see how it goes.

You’re welcome 🙏 thank you for watching.

I would just use my best judgment. Add a little bit at a time until you reach the consistency you are trying to achieve. Just don’t add too much because you don’t want to water it down too much. Remember it’s supposed to be high build primer to fill body filler properly.

Thank you 🙏 for the kind words I appreciate it. And to answer your question, no the clear shouldn’t peel.

@@J.Lulo_ thank you so much!!

Thank you 🙏 for the kind words I appreciate it.

That’s awesome 👏. I can tint color to a certain extent but I prefer not to have to tint because it’s hard to replicate the color twice.

Thank you 🙏.

I’ve sprayed PPG ENVIROBASE it does have good color match but the Spies/Heckers system has a pretty good color match as well. I’ve sprayed a couple of water Bourne systems, but I still prefer to spray solvent based paint. I guess iam just old school. lol 😂.

@@J.Lulo_solvent still works, nothing wrong with that’s brother

You’re welcome. Thank you 🙏 for watching.

You’re welcome 🙏. Thank you 🙏 for watching.

You’re welcome 🙏 I glad 🙂 my video is helpful to you.

Thank you 🙏 for the kind words I appreciate it.