How To Strip Car Paint For Primer And Paint|NO PAINT STRIPPER
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Subscribe to my channel- / chucho1216
Music From This Video from - 🎶www.epidemicso...
Contact Information-J.Lulo_1@yahoo.com
Spray Gun I Use-Sata 4000 B HVLP 1.3 Tip
Pressure Guage-Sata Pressure Guage
When somebody like yourself is so skilled, you make it look easy. I've tried and I know it is not easy.
It’s definitely not easy but when you have the right skills, resources and tools it’s “easier” than if you didn’t have it. It’s still hard work but somebody’s gotta do it.
Thanks for your videos appreciate the time you spent and spreading your knowledge
Thank you 🙏 for the kind I words I appreciate it. Iam glad that you are enjoying my videos and hope that your learning a lot from them.
Thanks J.Lulo, looks good! Great tips!
Thank you 🙏 for the kind words I appreciate it
I wish I could buy a paint stripper that works as good as whatever they put on. I suspect you've done a fair bit of sanding at this point. 40 grit scratches in the metal are evil. 80 grit and slow is a lot smarter if you want a good finish rather than a cheap paint job.
80 grit on a 8” hug will cut down that material like a boss. lol 😂
@@J.Lulo_ My big DA Polisher with 80 grit does big panels areas fast. It's the recesses and small areas that take me all the time.
Yeah that’s how it usually is. For that you can use your 6” da and it should work fine.
Parabéns pelo trabalho!!! Ficou show…👍
Congratulations on your work!!! It was great!!
Thank you 🙏 for the kind words I appreciate it.
Great job !! I'm curious though .....I think at that point it might be just as easy to paint the whole car. Great video though .....very informative. Your work always looks great 👍
I did paint the whole car I just didn’t film when I painted the parts off the car because it would’ve made the video too long.
Makes sense....like the content. 👍
Thank you 🙏 for the kind words I appreciate it.
Thanks man
Your welcome 🙏.
A few minutes covering the engine might be smart?
Is it possible to damage the body line/ crease on fender by sanding wrong?
It’s possible to damage the body line if there’s body work on the fender or you’re using a sand paper grit that’s too abrasive. For instance, if you use a grinder or 40 grit sand paper on a DA then you can damage the body line. 80 grit sand paper is the lowest sand paper grit I would use to start removing paint. Then I would go 120,180,and 320 for primer.
Between the dust from the sanding and the chemical fumes from the paint stripper, i dont know which is worse.
Honestly it’s all pretty nasty. That’s why you have to protect yourself with dust mask, gloves and safety glasses. I think paint stripper can be nastier than sanding it down but sometimes paint stripper is the best choice depending on the situation.
great vid! Though, id say tone down a little on the elevator music. Kinda hard to hear what youre saying sometimes.
Anybody who's anybody knows that challenger owners cheat, so def the baby momma throwing paint stripper and keying 🤣
Lol 😂 probably.Thanks for the kind words I appreciate it. And thanks for letting me know the music is a little loud I’ll make sure to keep that in mind next time.
Music is too loud when you are speaking.
Sorry about that I’ve been adjusting the music in my most recent videos because I’ve gotten that same complaint from other viewers. But do you like the music or would you prefer not to have the music?
@@J.Lulo_ Nah mate,the music is chill,and im learning a lot from you.
I’m glad my videos are helpful to you. Let me know if there’s any videos that you would like to see that I haven’t made. Getting feedback from my viewers helps give me ideas on what videos I should make next. Thank you 🙏 for your support.
charlie parra del rigo
conan gonzalez jackson guitars
ex mortus tv
Just a little advice, say it and move on. Don’t keep repeating yourself. Enjoyed the video otherwise.
Basically
Yes basically.
I'm glad he repeated many things. It reinforced my learning. Thanks for repeating my brother. 🤙
Thanks 🙏 for the kind words I appreciate it.
Somebody got done wrong there
Yes you see things like this all the time in the auto body industry.