Best Techniques For Spraying Any Clear Coat And Get PRO RESULTS
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Subscribe to my channel- / chucho1216
Music From This Video from - 🎶www.epidemicso...
Contact Information-J.Lulo_1@yahoo.com
Spray Gun I Use-Sata 4000 B HVLP 1.3 Tip
This is an affiliates link and I make a small commission from anything purchased through these links.
CLEAR COAT I USE NASON AXALTA-amzn.to/3YmBavr
PLASTIC CAR COVER ABN Clear Plastic Sheeting-amzn.to/3KQm8Ln
LE LEMATEC PREASSURE REGULATOR-amzn.to/3kGjfCj
AIR HOSE I USE-amzn.to/3KVnS68
Man I've been watching paint and clear videos. But your the best I've ever seen on explaining how to do all your stuff I thank you so much from southern Indiana.
Wow man that’s such a great compliment thank you 🙏 so much that means a lot to me. I’m glad that your enjoying my videos and hope that you learn a lot from them. Take care and good luck with your projects. And thanks again for the kind words I appreciate it.
I love watching and learning from you all your ways of painting and techniques
Thanks 🙏 for the kind words I appreciate it.
Great Advice and Explanation!
Thanks 🙏 for the kind words I appreciate it.
mane i found you by mistake glad i did :)
Iam glad you found me too. I appreciate the fact that you’re excited about finding my channel. Help share my channel with other you think might benefit from my videos. Thank for watching I appreciate you.
J tq for ur advice ....u gud painter
Thank you 🙏 for the kind words I appreciate it.
Bro! I'm gonna try this. Way less overspray. I spray at home .Thx for the tips
Thank you 🙏 for the kind words I appreciate it.
Wow that clear coat looks beautiful. Amazing technique 👌
Thank you 🙏 for the kind words I appreciate it.
Ciao seguo spesso i tuoi video emi piacciono molto ti posso chiedere di esprimerti in bar al posto di psi per capire meglio la tua tecnica buon lavoro e buona PASQUA
Thank you. Grazie mille
This is great advice on applying clear.....your content is top notch !!
Thank you 🙏 for the kind words I appreciate it.
Thanks for all the great tips ...i have started on my old Landcruiser (98 fzj105r),hope to do a reasonably good paint job.Cheers !
Thanks 🙏 for the kind words I appreciate it. And good luck 👍 with your paint job I hope my videos help guide you to a beautiful paint job. GOOD 👍 LUCK.
That's what I do the same thing good advice for people
Thanks 🙏 for the kind words I appreciate it.
Top work again mate I’m a young painter still struggling with the clear stage I get some great jobs then others just run 🤷♂️
Thanks 🙏 for the kind words I appreciate it. And don’t worry about the runs just make some adjustments and with time and practice you’ll be great 👍.
As you gain experience you will develop knowing what to do and how to do it, equipment, adjustments, material, temp, humidity etc etc. at first stick with the same quality equip. and materials while learning, that will help pinpoint all the little things involved with chemicals and painting. Even long time pros run into issues sometimes because chemicals can be complicated however as you develop knowing how to handle things you’ll gain confidence and results. Always have an open mind, the best are always striving to learn.
I agree with you 💯 percent. That’s a very good way to look at things. Thank you 🙏 for commenting.
Beast man. I'm doing my first one soon I've heard you should go lighter first pass? I'm just doing a touch up paint & 2k aerosol roof respray half outside 70 degrees etc..
Okay 👍 sounds good 👍 good luck 👍 and let me know how it goes.
@J.Lulo_ Thanks bro! The only thing I'm not sure of is, do you think I should primer over the areas where the clear has peeled? I was hoping to save on cans and just scuff it all real good and just base and clear it. The roof is smooth no body work just some spots with exposed base and primer from levelling out the peeled sections.
Yeah I would primer the area before you paint. It will give it a good protective barrier to make sure your paint sticks good and some of the old paint underneath doesn’t come through the new paint. Primer it give it a lite sanding and then apply your paint and clear coat.
Good info.... keep up the good work
Thank you 🙏 for the kind words I appreciate it.
How long do u wait ...before applying the 3rd clearcoat on the hood???
I apply the third coat of clear right after the second coat.
What about mist or overspray does it get on other areas that you haven’t cleared yet and how do you handle that
The mist and overspray evaporates into the clear when you use the right kind of hardener in your clear coat.
Great tips. Will this technique work on bumpers, I have a pair I'll be spraying next week?
Yes this technique will work on a bumper. Just be careful when spraying bumpers because bumpers have a lot of curvy areas that can be hard to reach.
What speed activator are you using in your clear & how long you waiting between coats ?
I usually use a slow activator in my clear and just go back to back with my coats because I have to get it done quickly. The reason I do it like that is because when you start at one point of the car and finish coating everything else the first panel you started with would have flashed enough to apply the second coat of clear. Plus I spray in a climate controlled paint booth which helps to flash the paint as well.
@@J.Lulo_ Approximately, what temp is your climate control at ??
Usually it’s at 70 to 75 degrees if the weather in my area is cold.
@J.Lulo_ Thank you for you fast response!! I really appreciate the help!!
Your very welcome 🙏.
Is clear coat the same as blender? Also I used Eastwood and it came out like sandpaper and so did the Dupli Color. Thanks again
Well it depends how you spray it and the temperature that you’re painting in. If I can I’ll try to make a video explaining why this happens. Thank you 🙏 for commenting and watching my videos I appreciate it.
Clear coat is not the same as blender. Blender is a transparent base coat and clear coat is the final top coat that protects the paint and gives the car a beautiful finish.
@@J.Lulo_ I think they used to call this top coat blender on the older cars. The pressure had to be around 70lbs and you pretty much had to run to keep it from running. This was back in the late '6's
Cool 😎 I love to learn how things were done before. Thanks for the info. I’ve heard a tun of stories of how things were done back when paint use to be acrylic enamel and single stage. It’s interesting but also seemed a little more complicated to deal with.
Dent pullers required that you use a screw in the panel and a pick hammer. If you use a pick hammer it's going to go through. Then if the metal was stretched you warmed the high spots with a torch and then a rag with cold water too shrink it. Then grind then bondo, then thick sand able primer several coats and then an air sandere that required 100lbs pressure, then a thin coat of primer which you would knock the top off before painting. I still think the new way is more complicated. You are an artist. I forgot then after painting and top coat blender you used buffing compound.
Does the application of the first coat works the same for silver metalics colour?
Yes I use this technique for everything I spray.
I see you use the push-pull method. I’m comfortable doing the pull-pull but would that cause excessive overspray or streaking?
Can you clarify what you mean with the push pull method.
@@J.Lulo_ You started on one side of the hood by spraying forward then you go to the other side to continue by pulling the gun towards you
Ok yes in some occasions it my cause excessive over spray depending on the panels you’re painting. I like to start from one end of a panel and work my way across. I feel this way it comes out smoother and cleaner.