How to Set Up A Paint Gun
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2022
- Subscribe to my channel- / chucho1216
Music From This Video from - 🎶www.epidemicsound.com/referra...
Contact Information-J.Lulo_1@yahoo.com
Spray Gun I Use-Sata 4000 B HVLP 1.3 Tip
Pressure Guage-Sata Pressure Guage - แนวปฏิบัติและการใช้ชีวิต
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
Well, the outer scale of the pressure gauge is in BAR so base is in 2 bar, 1st. clear in 3 bar and second clear in 2.5 bar. Anyway thanks a lot for sharing your experience !
J. Lulo, I don't know where you came from but thank goodness i found you. Another clear understanding keep it coming class is in session and I'm learning. 👍
Thank you 🙏 for the kind words I appreciate it. Iam glad 🙂 your learning from my videos and I will do my best to keep them coming. 👍👍👍
Another great video sir. Really enjoy the knowledge you give.
Thank you 🙏 for the kind words I always appreciate it.
I have an old sata 3000rp....it's my go to gun. I've got some iwata's and devilbiss guns too......but that sata spray's the best for me. My gun settings are very close to yours....great video
Thanks for the kind words I always appreciate it.
Thanks for your experiences, your a good man...
Thank you 🙏 for the kind words I appreciate it.
nice work brother. I'm running 2 digital 5500 sata, one RP other HVLP, (those are my clear guns 1.2 tips) 1 digital 3000 (base 1.3 tip) and 2 old sata 2000 (sealer and primer 1.4 and 1.5) and an old devilbiss finishline fl03 with the 1.8 tip for heavy primer surfacer. I run all my pressures at 2bar 29psi, fluid wide open (pull the trigger and screw in till i feel the trigger pushing forward. Air all the way open and 1/4 close. for distance from panel pinky and thumb rule for base but closer for clear and run super fast with 80% overlap (just for clear). a little trick I learned about a super flat finish straight out of the gun is that I DA the Primer with 800 and a interface pad. I shoot OMNI which I know it says 400 but was getting to much orange peel and did a experiment with 800 and beautiful. I always tack between each coat of the base. I'm going to try out your setting and see . thanks Corey
WOW Dude you have a great spray gun collection. I have a SATA HVLP 4000 1.3, SATA jet 100 BF 1.7 primer, and 3M PPS 2 generation spray gun. I really like the 3M spray gun because you can change the tips for whatever the job is. It doesn’t spray as good as the SATA but I like all the options it gives me.
Been trying out your settings over the past week. Getting some really nice finishes. It does look like you set the pressure for the clear at 40 psi.
As long as your jobs are coming out nice 😊 from my instructions iam happy 😃.
Newer subscriber. You got some good videos, I need to go back and check out more of them. I'm doing some kind of paint n body work 7 days a week right now as a side gig, and in the evening I catch a few paint videos daily. Always looking for ways to improve
Thanks 🙏 for the kind words I appreciate it. And it sounds like you’re hustling hard man. Remember to take a break sometimes you don’t want to burn yourself out. Good 👍 luck with everything you’re doing and I agree with you it’s always to good to keep improving your techniques. Take care man thanks 🙏 for the love.
As far as I understand, when making the adjustment of the spray gun, after adjusting the pressure to 2 bars, we leave the fan size fully open and adjust it only by turning the liquid knob from fully closed. We will find out how many rounds we will turn according to the model of the gun and the tip.
good information to me, thanks
Your welcome 🙏. Thank you 🙏 for the kind words I always appreciate it.
Dope 👌
Thanks 🙏 for the kind words I appreciate it.
I’ve been having problems with my clear. Thank you lot of runs and orange peel
Your welcome 🙏. And Thank you 🙏 for the kind words I appreciate it.
U are the best
Thank you 🙏 for the kind words I appreciate it.
🔥🚒🔥🚒🔥🚒🔥🚒
You set that to 3 bar(40psi). 2 bar is 29psi.
Ok
Video suggestion: mixing paint, ratios. Solvent and water based
Thanks 🙏 for the suggestion I will try to work on a video like that.
TOP G
Thanks 🙏 for the kind words I always appreciate it.
Na SATAJET 3000 B RP qual configuração de pressao no manômetro.
English please.
what tip size are you using for base. is it water or solvent?
I am using solvent and the size tip iam using is 1.3. The 1.3 tip is the most common used tip for water bourne and for solvent.
Do you use the same gun for sealer, base and clear? Or do you have separate guns for each?
I use my paint gun for painting base coat and clear coat. I have a primer gun for spraying primer because you shouldn’t use your paint gun for primer. A primer gun should have a fluid tip of between 1.6 or 1.7 to fill the body filler properly. Now there is a 3M PPS gun that allows you to change the guns tips so you can use one spray gun for everything. Here’s a video I made of the 3M PPS spray gun video link 👉th-cam.com/video/VUnsaStAPFs/w-d-xo.htmlsi=V30HIvd7FT1Z_73-
@@J.Lulo_ yea my primer gun is only a 1.4 rn so I've been looking into one with a bigger needle so I'll definitely look into the 3m gun 🙂
What kind of gun is that i love its paint job
The Spray Gun I used in this video is a SATA 4000 B HEART & SOUL special edition, with a 1.3 HVLP nozzle tip. My favorite Spray Gun since I purchased it. SATA spray guns are one of the most popular spray guns in the industry.
SATA HP?
Важно всё: температура, вязкость, давление, форма факела, подготовка воздуха, расстояние, качество ЛКМ...
SATA 4000 B HVLP 1.3 FLUID TIP.
Привет я из Казахстана,хорошая покраска. Для меня SATA 4000/5000 лудшие пистолеты
I don’t understand this language. English please 🙏.
I don’t think you know how to read your pressure gauge. You were setting pressures much higher than what you said you were setting.
Holy smokes...start at 2 turns out and adjust from there. Don't start out full or it may get you in trouble.
I close my fluid all the way and then I adjust from there. 2 turns out is a good place to start and then you can keep adjusting from there to get your desired spray pattern depending on the paint you’re using.
Hay my name is mudasar from Pakistan I am working auto painting job oman country ma I am job auto painting in the country ma jobs
Hi Mudasar thanks 🙏 for watching and commenting. I hope 🤞 my videos are helping you with your paint jobs.
I have a 4000
It’s a great spray gun isn’t. I love my sata 4000. Best spray gun I’ve ever owned.
@@J.Lulo_Have you ever tried sagola paint guns?
No I haven’t painted with a Sagola paint gun.
@@J.Lulo_ Try one out sometime if you're ever in the market for a new gun. I have a base and clear one and I love them both a lot. Sprays similar to a sata
Hopefully 🤞 I’ll get to try it one day. Sounds like a cool spray gun.