Build the Polar Lights USS Enterprise Refit 1:350 Scale - Part 3
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- Continuing my 2023 mission to build the Polar Lights Star Trek USS Enterprise Refit in 1:350 scale.
00:00 - Introduction
01:11 - Stage 5 - Removing the Phaser Arrays
04:08 - Stage 6 - The Photo-Etch, Officer's Lounge Window Frame
11:13 - Stage 7 - The Saucer Side Walls Light Blocking
Other channels mentioned in this video
SPRUEVERSE : / @sprueverse
AZTEK DUMMY : / @aztekdummy
TREKWORKS : / @trekworks
Most products can be sourced Worldwide from :
www.culttvmanshop.com/
All my Amazon purchases can be found in my Amazon store at
www.linktr.ee/worldofwayne
Paragrafix Photo-Etch and A/B Deck Upgrades
greenstrawberry.cz/
1:350 scale figures can be found at :
www.partworkupgrades.com
Arduino software can be downloaded from :
www.arduino.cc/en/software
The link to the Arduino Code, pictures and a 5 minutes reference video and all Enterprise screen grabs from TWOK can be found at :
drive.google.com/drive/folder...
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media, Amazon Store and Merchandise can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#startrek #polarlights #enterprise - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
the idea for getting the window piece to sit flat in there was very clever, I was impressed with how well that went.
Thanks!
Very good keep them coming.👍👍👍👍👍
I can't wait to see your painting of the model. As a kid in the 80's I can't remember how many refits I built. I could never get the paint correct. I've got a number of refit kits and add ons just waiting to see how you paint her then the get the courage to try it myself again after all these years. Thank you.
It's looking great!
Hi Wayne bis jetzt hast du viel fein arbeit gemacht , die brücke die ich übriegens richtig cool finde . Das fenster hinten und die Beleuchtungsoberflächen und an der seite finde ich richtig gut. Ich freu mich auf weitere Videos.
Great tips and ideas 💡 about how to approach a model like this. Thanks for sharing, Wayne. I'm enjoying this build series, being the huge Star Trek fan that I am.
I love that Thunder Road model! It catches my eye eeeevery time!!!!
Like video
Good work looking nice.
I like your different approach to putting in the officers lounge photo etch, alot of other builders trim the photo etch and widen the opening in the lounge window for the part to drop in as opposed to surface mounting, looks very clean and requires less putty work it seems.
I trimmed the part and used putty to make it all flush, but I agree. next time I'll probably surface mount it and try using putty to hide the edges.
Nice progression so far, keep at it 👌
👍🏻👏🍺
Hi Wayne! One important thing to remember is to mask any of the pegs and peg holes that you use to assemble the final ship, especially the dorsal and nacelles. The pins are designed to exactly fit, and if you get any paint in them, they will not fit at all. Don't ask how I found this out. 🙂 Nice work so far!
Yep. Already advised on that so masked them up
Great videos, I´ll use your videos as a guide to build mine
Great stuff Wayne. Could you put some more light on with the next video? I think it needs more light for the fine details here than you need for the partworks construction vids.
I actually had to tone the light down as it was blowing out the white balance and losing some of the detail. Shouldn't have that problem once the shine is off and it's primed
@@WorldofWayneUK , Perhaps a side light that will create some shadow in the detail. I know, lighting can be difficult especially when you get to the smaller details and closeups.
Looking good. Have to cut out for the navigation and thruster lights also.
No. I have small SMD for them so I will be using a micro drill through the wall
@@WorldofWayneUK I got the movie grade lighting (mega board) kit. It came with 3mm LED’s so I had to cut them. Definitely a time consuming project. Looking forward to watching your build
Do you have the officers lounge to go behind those officers lounge windows? If you don't I recommend you use tracing paper behind the widows to give them a nice flat light diffusion.
I will be yes
👍👍, There seems to be no life forms on this desert planet captain!
Hi Wayne do you know the TH-cam channel otaku builder if not take a look at his refit polar lights enterprise and paint job
👍🏻
Like the approach you have used onnthe offers lounge. Very interested to know what adhesion promoter you using. I know a lot of the USA guys swear by a brand called Bulldog. But us UK guys are not able to get hold of that . Interested to see what you use.
I use a CA glue from a company here called The Range. It sets clear and drys quick
@@WorldofWayneUK I go to the Range quite a lot. Do you mean ' Adhesion promoter from the range? "
If so is it The Range's own brand? Thanks for the reply?
@@viswanathanpather6849 ahh sorry I misread your first comment . No I used amzn.to/3DgJoNP from Amazon
@@WorldofWayneUK Thank you. I just happen to have about 3 cans of this already.
looking good where can you get this from and what price thanks
It’s $99.99 . It was available on Amazon in the UK but it’s hard to get stock at the moment. Keep an eye at at Wonderland models
This video may be of help. th-cam.com/video/7VMyePEToYE/w-d-xo.html The Smithsonian curator also mentioned that they to put out on the web somewhere the paint colors that were used.
Your 350 scale minitures do you know of any other source in amerca i can get some from?
Not in America. I believe they post to the US though
@@WorldofWayneUK thanks, the last time i ordered something from EU or even Asia it took a arm and leg in shipping and took forever. Im sure i can find something on amazon or a hobby store. Hope your build is going good. I started mine im in the middle of the full aztec masking and omg thats a bitch very time consuming.
Did you anneal your photoetch parts?
Not on the piece you see here but for the smaller pieces I will. I won’t use a torch though. Good old fashioned oven for me
To bad they don’t make an Enterprise D in this scale it would be so much better than that disaster Eaglemoss D
Agreed, the Eaglemoss Enterprise D was awful. The issue with that one is the panels are supplied separately from each other so when it's put together the gaps between the panels show and the lighting is bad on the warp nacelles too.
the top of my saucer for enterprise d from eaglemoss is alomst finish now i wonder where the enterprise d 1701 should be i asume is a sticker or something
Yep. I am guessing a decal or sticker
How can you scale a model at 1:350 when the item has never been built and never will
It’s a very good point
There have been Technical Breakdowns on the Enterprise so I'd assume the Dimensions came from that.
There is plenty of literature that breaks down the dimensions of Star Fleet ships. It’s the same concept for any sci-fi model. Real or not, with the fake dimensions you can break it down to the proper scale.
Because dimensions of the ship are often integral to the story telling (this isn't JJ Abrams) and so were established mostly from day one. In this case the mid-1960's.