ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
how to block sanding 2k high build primer with guide coat for that Lazer straight body before paint
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2022
- short little video we put together to answer the question..... how do we get our body work so straight? it's easy. watch this how to video and do it yourself.
Will b watching for further vids great info.
Great video thanks 👍
Great info
Thanks
Great video.
Would love to see the finish product. I do have a question. I used the upol 3253 primer.. and I was told that it’s a direct to metal primer. So when I follow people’s videos it is kind of hard because type all use epoxy primer first and then the 2k primer before sealer or paint.. when I’m sanding I hit metal instead of epoxy primer. I was also told that you cant put body filler over the upol primer so do I have to sand those spots back down to bare metal in order to use body filler
You can use a skim coat over the primer if it is prepped properly with 80/180 grit, and then reprime with the 2253
Also the final video on the impala is on the channel
Question, do you rough up the low spots before filling them. I saw one video where the person circled the low spot with a pencil so as not to loose it when he roughed it up. He was using powder for the guide coat. I love your videos your a good teacher. Thanks
Absolutely, and thanks for watching
great vid, question, how long do you let 2k sit before sanding so you wont have any shrinking issues?
A day or 2 is fine as long as it is in a heated shop
thanks so much, I appreciate it@@bpbrestorations2093
😀👍
promosm