วีดีโอ

A new Vocaster Two is now 69€ at Thomann Music Store!!

Hi, I plugged my (only) usb yeti mic in my MacBook, I created an aggregate device my flow8+yeti, garage band audio chose aggregate. I see the signal of the mic routing the 2 channels and the dj set going out the controller and getting into the flow 8 (channel 3/4) when I hit record it doesn’t record my voice or my dj set) probably a conflict to avoid feedback? Help please.

Thanks PodMeister, your thorough reviews are very useful and they engage through the length of the video. Well done!

love you man i m from egypt am yousry elsherif singer.and have rod c p2 i learned a lot from you thank you for this simple method.💓💗💗💗

Update: Per the manufacturer only the XLR has the phantom power and not the TRS option. So if guitars are plugged using the TRS and also a mic or say a synth using 4 & 5 then you shouldn't damage the TRS connected gear. Maybe confirm with a meter. Don't use combo XLR to TRS cables to any gear be safe.

This guy is really amazing

As the menu structure of this mixer is very well designed (props to RODE for that), I didn't feel the need to read the manual, but I was missing the Q-setting. Thank you for pointing this out!

Excellent video. Thank you.

Hi! I really liked this video 😊 I'm considering getting the Focusrite Vocaster One for my Rode Podmic USB. What do you think, is it a good match?

Incredible thank you!

So for example I have one mic that needs phantom power and nothing else does. If I turn it on I will damage my other gear that is connected? So the 6 mic/lines are useless unless PP on or off but no combinations? Makes no sense so (2) guitars are plugged in and a synth and only one mic needs PP I can't use the mixer? What if it's accidently turned on? No where in the manual does it tell you whether phantom power is applied to the TRS vs XLR which is stupid that a manufacturer can't tell you that critical information. On-line info suggests that typically phantom power is not applied to the TRS of the combo jack that could fry your in-line gear. The manual only states or calls these jacks a "Mic/Line" jack which is generic for combo jack but nothing about whether the TRS is phantom powered. The only way to determine would be to put a meter on a test TRS cable with the PP on.

I like your choices, it’s simple and effective.

it has no normal quilizer or compressor or deesser?

Good info as usual Mister Meister. 🎙

Excellent video. At least now I know to make this change when I get my Rodecaster Duo delivered soon. I returned my Mackie DLZ Creator XS due to the incompatibility with Linux. Sure, Rode does not officially support Linux, but I've heard good things about getting the Rodecaster to work in Linux. And yeah, I don't have a need for loopback in my Linux machine. I can setup virtual sound sources through software and I don't get any latency at all as long as everything is done in software.

Finally someone who understands Automix and doesn't think it's a noise gate, lol. Wow I can't believe the priority affects a mic even if it's the only one talking. That's not good. Hope it has been fixed in a software/firmware update!

Thanks a lot for making this comparison video!😉👍

I wasn't even considering this solution and I just randomly clicked on this video. This actually might be the best for my needs. Great review.

Would I be better off just going with the p8 then ???

Which one of these microphones do the best with blocking out background noise ?

On Rodecaster Pro II you can mute monitor automatically when you fade up the microphone Can I do this same function on Tascsm ?

Noticed the video mic go 2 had quite abit of noise. Was the gain too high?

You're amazing!!! 👏👏👏👏👏

Great video, I learned a lot. I want to use bluetooth headphones with my DI as I practice my bass. I'm wondering how I would pair a set of headphones to this? Or.. would you recommend something else? Thank you!

You don’t lose Eye Tracking on the ZV E10 if you disable write on sd card, what you usually not need if you use a capture card 😊

It’s be amazing to click headphones 1 dial to shortcut me straight to the submixes for headphones 1. Then I could quickly update my own volume without touching the main out.

Just got the 2 for $100. They're blowing out inventory w a new model out soon. That's a steal.

Can you plug the mixer straight into an iPhone for tick-tock live streaming instead of a computer?

Great explanation! Thank you

Excellent comparison. I think we'll be going with RØDE.

Hi, thank you very much for the video. can you help me? I work in radio and I'm thinking about buying the Roadcaster 2 Pro but I needed to know if it does this. imagine: I'm live to 2 radios (2 computers) the sound doesn't clash live and I have 1 or 2 microphones that allow me to speak whenever I want to speak to the broadcast on air on computer 1 and the same for computer 1. that is, on the roadcaster it would be micro, usb pc1 micro usb pc2. Is this possible without colliding with each other? thanks

How would I use the L8 for multitrack recording for two cohosts on a podcast? How to I set up the inputs in GarageBand for multitrack?

Great video. Could I use the video micro with a streamerX or rodecaster if I have the vxlr+?

thank you!

Great video, quick question would the Atamos Ninja V monitor and recorder allow you to bypass the 30 FPS issue? Or would face detection be impacted regardless?

Hi. Thanx. Is it possible withe the iconnect AUDIO 4?

After watching literallllllly 50 videos - finally this one answers solves my problemmmmmm. Thank YOUUUUUUUUUUU🎉🎉🎉🎉🎉🎉🎉

My friend, I'm a fellow TH-camr who's been desperate to figure out how to connect my studio monitors to my Rode while being able to use a Mic simultaneously, without getting feedback - after MONTHS of trying to figure this stuff out and countless tutorials - your video FINALLY solved it for me. Not only does this resolve my mic/speaker issue, but it allows me to have a dual-desk setup that's exactly how I originally wanted it, without compromise. You've done me a far bigger service than you realize, I can't thank you enough for your S-Tier content and teaching skills :)

Regarding the section about the 1/8inch not a TRRS input, does it mean that use the USB to connect to phones for 2 way audio (I see everywhere only saying that usb is for connecting to computers)

What about the differences in preamps and does the Tascam need a cloudlifter ?

hello. Thanks for the video. How do you evaluate the quality of the preamps of this mixer-recorder? In terms of noise and ambient sound In terms of record high and low frequencies as well as midranges? And is the phantom power button separate for each line? or not thank you 

QUALITY 100%!

One thing to note: the NT-USB mini picks up a lot of echo because it's designed for a controlled environment, while the VideoMic Go II picks up fewer frequencies from the environment, focusing on the point where it's aimed. The frequencies projected by lip movement and salivation will be much more important. On the other hand, without such a controlled environment, the first microphone can be inconvenient because of its exaggerated bass. In that sense, I opted for the VideoMic Go II, since it allows you to save a lot of money on acoustic conditioning if you're just starting out, as well as allowing portability, placing it out of the shotgun, among other things. I don't really know how their internal workings work, I assume they have a built-in audio card that equalizes their sound sources and in the meantime serves to transform the audio to decent digital quality. The truth is that I got used to, video after video, having better feelings with shotgun microphones than with studio or podcast microphones. What do you think?

i might have a difective usb c to c cable with my rode streamer x i have buy a 3rd party usb c to usb a cable i hope this works i have made sure it is highspeed or super speed and 10gps

Hi have you tested the SSL 12 against the Rode for podcasting and live uploads ? I think it would be intresting

Just new to the things and wanted to know, if the VideoMic Go 2 might be a good voice microphone on your desk to the side or on top of your monitor (on a boom). I dont like to have a microphone directly in my face but a 45° angle and 20-30cm away from my mouth would not interfere that much with my view and mouse arm. What would be a setup and would this be an option or should I go with a dynamic mic of to the side. I am wondering, if the rode or a dynamic mic would pick up more? The rode seems sensitive and probably cannot get it out of the keyboard direction. Sorry, but its not for the best streamer setup specifically, but for having a good solution for discord/teamspeak and perhaps some recordings. I am torn: I use a headphone....and went with lav mic before and I dont know if stepping up the game with such a thing would be practical. I dont want it in my view, I dont want it to pick up crazy amounts of keyboard sound. I heard of this here, I heard of dynamics (some cheap fifine options dont sound that bad) and I heard about unidirectional laveliers? Anyone has a tipp? Shouldnt be much more than a 100-150€ solution tbh.

This is very clear, thanks for the video. It helps a lot!!

Wonder if you'll see this comment, i'm about to buy the rode streamer x, and wanted to ask if you are still using it up to today and how did it age so far?

I am new to this stuff but BASS BOOST [ sounds VIBRATION DISTORTED to me

That playback mode is a feature I think. That gives you another option for a playback channel, leaving you with multiple playback channels. The RCP cannot do that.