วีดีโอ

@@terry8912 you’re very welcome, thanks for tuning in!

@@AmericanArmed bad experience with Smittybilt?

@@admauto thank you for your input and for tuning into my channel! Cheers!

05? Wow, that's impressive. Anyway, quite a change from your V8 5.3L. Thanks for your input and enjoy your Taco!

Well not when ya used to a 3.5L when ya owned a 98 grand am, then moved to the 5.3L V8 05 Silverado then back to a 3.5L V6 21 Taco. But the ECT helps while driving.

@@davidellison6571 hey David, not sure if we’re talking about the same thing but the plastic crash cover doesn’t get reinstalled so it has to go regardless. At any rate, if you’re thinking of doing this, please check out my other video on installing the wings… =) just something you might consider of doing. Thanks for tuning in!

@@swimcali saved me a few bucks and it works just fine. That’s what frugality does lol. Thanks mate!

@@JoseZambrano-v5k thanks Jose!

@@jdp1956 I ended up switching to 1.25” 3 months after that and they’ve been on since (also KSP’s). The 1.5’s were just too much offset for me. Good luck with your install brother and make sure to torque em right! =)

@@modXELA Gracias Amigo, thanks for the tip and for responding. I'm located in Naples Florida, we have no mountains or hills, we are completely flat.

@@savg1540 good point but I actually prefer it a little tight just like that even with my Gastr fully extended they’re just enough slack. it’s a small gauged wire, it will be flapping quite a bit if it’s loose.

Hey Stefan, I’m glad the video helped brother… stay safe!

@@rxdoom1194 I appreciate your comment. I’m very glad and puts a smile on my face that this has helped many get out of a bad situation. Cheers!

@@GNCLOVER yep, I got it all tucked in nicely.

@@BumBee22 lol, salamat. Are you Filipino?

@@modXELA Born and raised. I speak Tagalog, Waray and Cebuano.

@@GingaWave got them from Aliexpress.com at that time. Not sure if they still carry it. Check Etsy.com or Amazon also. Good luck.

@@loicgazeau2782 did you install something new on your vehicle?

@@elismad3723 same error message?

@@modXELA yes sir

@@elismad3723 did you install anything new on your vehicle?

@@modXELA new taillights I’ve tried just about everything honestly

@@modXELA anymore advice would be awesome tho you are the man

@@melandteresacool4397 I’m glad you found my channel. Thanks for tuning in!

@@JermichaelAdventures I’m glad you found my channel and that the video was helpful! I appreciate you tuning in. Safe truckin’

@@marymainville4214 you’re right, one should be green and the other is amber.

Hey Charles, I'm glad this helped. Thanks for tuning in. Stay safe!

Hey JuanManuel, I bought the extended lugs. The other ones only give you about 3 turns so I wouldn't risk it.

Hey liftjockey, IMO, the mount plate would be redundant in this case as the bumper guard already has mounting brackets already built-in. Thanks for tuning into my channel, much appreciated!

@@aspiringpro good point, I haven’t been on muddy trails this summer yet so now I’m curious how it will end up in that scenario… cleaning it won’t be fun

@@modXELA It's almost like they had designed it some some sort of lens to fit inside there. I'm so confused. lol

You're very welcome BumBee22. Walang anuman.

@@modXELA This spot would be a good "KILL FUSE SWITCH" location.

@@BumBee22 lol, you got it my friend. I was thinking the same thing. That will be my next video!

@@modXELA With the 10-amp fuse, it will require at least an 18AWG wire. I looked what is available: a wire harness with an in-line fuse comes with a 16AWG wire and so are the other parts to use with this build.

@@BumBee22 thanks for the info, good head start!

Make sure to buy hub centric spacers. Anyway, I checked forums and couldn't find any discussions on using extended studs with 1" spacers unfortunately. There's a chance that the spacers will already come with extended lugs so check the vendor first. On this note, I also sent a query to Bora and KSP for their input. Will share once I hear back.

@@modXELA wow thanks the for informing man. Definitely get back to me !

@@tomalgier9930 KSP Motor replied and advised that extension lugs are not required and provided a link to their product if you're interested (www.kspmotor.com/products/toyota-wheel-spacers-009bk )

@@modXELA that spacer comes with 20 open ended nuts & hardware. Is that all that’s needed for a full install ?

@@chharlorakim7346 I’m glad the video helped! Thanks for tuning into my channel.

@@djkatazyou’re welcome. thanks for tuning in.

It's pretty strong stuff but I can't say for sure if it will get rid of it totally. Maybe you can apply it a couple of times and see if that works but generally, it does a good job.

Hi aspiringpro! That's correct. The lightbar as advertised says 24" but in reality, it's shorter than that. Best way to put it is that it's like buying 2"x4"x8' lumber, it's actually 1.5″x3.5″x8'. I hope this helps.

Hey there... unfortunately, this is not specified on either the product website or on the actual product packaging. My best guess based on the lumens (3600), it will be between 12-15 watts per LED strip. This comes in 3 strips but I decided to only install 2 strips. I hope this helps my friend and thanks for supporting my channel.

LOL... you should see the front! Anyway, one of my followers just wanted to see how it looks as he's thinking of installing one that's why the video was just quickly put together.

@@Leoo-zv1gq as long as the housing is there, it will work. When you purchase, check with their technical support for confirmation and fitment.

@@DyegoPC1995 yes it does. I can take a video of it at night and will send you the video link to give you an idea.

@@modXELA That would be awesome!!! Thanks! 🙏🏻

@@DyegoPC1995 Here's the demo video... th-cam.com/video/ulILPVRzVe0/w-d-xo.html

Hi travblurr8043, I'm sure you did plenty of searching but I don't think it exists. I wanted to avoid all the cutting as well but I couldn't find one that looks similar to the BA or DV8 etc. However, if you Google "Toyota bumper guard" you'll see some that don't require cutting but they don't look anywhere close to this look. Good luck with your search and thanks for tuning into my channel!

@@Waikanefilms_ thanks for tuning in and supporting my channel!

@@teabee44 still works like it’s brand new! One of my most useful mods.

@@modXELA glad to hear. I'll be buying a set now, thanks.

@@teabee44 one thing that I ended up doing is I installed the switch in the back of the bed close to the driver side tail light. Works well for me. Anyway good luck with your install and thanks for tuning in and supporting my channel!

@@modXELA you're welcome, I was thinking about deleting the switch and locate the relay under the rear seat so my power from the bat will be as short as possible. My bed is lined with line-x so I'm guessing I'll have to mount it with hangers as I doubt the tape will stick long term, and we've been in the triple digits and I'm sure the adhesive isn't going to do too well by the end of summer.

Hey@@MaxBaker-r8m, I’m glad the video helped, thanks for tuning into my channel. I appreciate the support! Stay safe!

@@jaimieaddy1790 real interesting. I’m glad this helped, thanks for tuning in jaimieaddy!