วีดีโอ

Hey Cousin.. yes it was just before, I know it was early, I think it was just before I was talking to that guy in Chicago on your video right before I contacted you for our QSO. Boy that was confusing 😂

Thank Gazza.. radio has been like a graveyard today.. completely dead.. stay blessed brother.

@@GeorgeEI7KO Hi George, I've said it before and I'll say it again I cannot thank you enough, when the Stryker went down I was gutted, it felt like any other radio in my collection just wasn't good enough, these Mark 1's work so we'll on AM and SSB, not by a long chalk but whatever it is about them in comparison to most modern day radios they certainly perform superb, im still fine tuning the sharpshooter microphone for that sweet spot.. but she's back in the shack all thanks to you my friend.. As I said before it would have remained in the box forever because finding a competent enough technician I could trust with it was almost impossible, so I am pleased I asked you on the off chance you were still fixing radios, You are a wizard and I give you high praise for your talents, you are the best and second to none my friend, bless you and your family and thank you most sincerely for taking on my radio, best wishes 73

@@DeltaXray444 that's for the kind words. I'm no expert. Was just an easy fix. My main thing is making them look new again. I have a very detailed eye. Even more detailed now I got me fist ever pair of specs 👓

@@udx-483muddbucket5 Hey there friend, I had been watching him for over an hour before I spoke to him and his signal barely changed, amazing.

@@ianhagler3678 Hey there Ian, I'd like to know how much power he kicks out he's always one of the first stations I hear when the skip rolls in.. im good thanks and hope you are in good health my friend.

@@stephendennis5911 Thanks buddy hope you are well my friend. Stay blessed.

@@technic7762 Oh yes they are always hitting me before most stations also Mr Jim 813 Georgia and Paul NB63.. Was that you mrk2 148 on his channel ? When my Stryker blew I put it back in the box never to be used again.. I thought George had stopped fixing radios last year and I asked him on the off chance if he would do it.. I was let's say ecstatic when he said yes.. he's a very good technician one of the best.. and that secret sauce he uses is something else lol.

@@DeltaXray444 Yea that is my mk2 148 what is on his channel .I was the same ecstatic when he said he would do it and was over the moon with work he done to it.The radio works fantastic and that secret sauce lol sure is something else the old 148 looks brandnew.

​@@technic7762 I agree with that secret sauce, George sure made something there that makes radios shine better than a new rig from the factory lol.. I went back and watched the 148 video a couple of times and if you are as happy as I am with the Stryker I definitely know how elated you feel.. the man is a wizard for sure and treats our radios like they were his own, a genius technician beyond compare. Thanks friend 73.

@@technic7762 he's always very strong that guy, but always down on frequency. His box needs a tune for sure.

@@GeorgeEI7KO yea for sure the signal is there but the audio is not

Εισαι ευχαριστημενος απο το μηχανιμα; Αξιζει τα λεφτα του;

@@joanneb8291 Why thank you ma'am your comment is very much appreciated 😂 Thank you for all your support JoJo over the years you are the absolute bestie ever, stay blessed dear friend big hugs and all that sloppy crap 😂❤️

@@DeltaXray444 💋💋💋

@@cbradioghosttalk1986 Why thank you Mr Sheriff sir it was a great time on the radio, I do pretty good dragging in the stations to say im low down and most times on the radio im competing with some great stations around me who have much better elevation than myself.

@@worldradio456uk5 Hey Richard, thank you for the kind words I have been in recovery for the most part from health issues but im kinda getting back on track and will try to upload more often.. It'll be good when we can get back to the usual channel now the skip has settled for the better and get some of those group contacts posted up again.. The first few weeks with the skip has been low down when other areas have been much better but it's usually like that for my area when the stateside skip season starts, but now it's rolling in good it's turned itself around and the states are booming in to my location both east and west coast of America and everything in-between.. more great radio days to come over the colder months im sure. Stay blessed friend and happy Dxing 73.

@@EricTechstuffs Hiya Eric oh yes it has been hit and miss and very erratic for the most part but yes the change for the better over the last few days has been fantastic and the skip is now paying dividends.. mother nature has definitely sorted herself out for sure.

Hey Gazza. Hope your ok bro ? Look forward to speaking to you again take it easy keep safe. WR456🇬🇧 Richy.

@@worldradio456uk5 Doing ok, hope all is well your way, Hope to catch you when the skip comes and stays ! It's just starting to pick up!

Hi Gazza. Yeah iam ok thanks bud . Had a few difficult months here but seems to be going in the right direction now. . I will listen out for you on 415 lsb again . Take it easy bud. 73s. WR456 🇬🇧. Richy .

@@gazzabyerun9048 Thanks Gazza, im hoping to start uploading more content again and maybe do a few live streams along the way.. keep them peeled for the notifications brother.

Hey Bill hope you are well.. im really glad the skip is turning around for you and you are getting those much sort after contacts especially into the UK.. if you hear me calling out your way holla back and I'll certainly reply back to you.. It's good to get some good skip after a shaky start it seems like mother nature is settling down and giving us some great quality propagation. 73 friend.

@@DeltaXray444 yeah I made contact with Maxine? And I mistakingly thought I had Kate on line after I asked her if she was Kate she sounded bothered and miffed that once again she was being mistaken as Kate 01 and pointed she was on other side england ( oops!!!) It was legitimately a mistake she sounded so much like her Looking forward to hearing you maybe today I have a visiting health support group coming today and xyl had to leave earlier than normal for her helping out the family friends daughter expecting a hi risk girl only week away or so here's hoping this stays on track her Dr staff has detected a possible heart valve issue but it has not gotten more noted which is good sign the baby may dßtart more on healthy side

@@gtretroworld Hi Neal.. Those Sharpshooter mics sound incredible on certain radios, they are very loud crystal clear with lots of kick to drive the radio.. many times I will get a compliment and comments on the audio before a signal report.. The beam is cut and sorted and ready to go up in just waiting for better weather and my brother to do the heavy lifting.. im still in recovery so all I can do is point and bark orders 😂 By the way contacted Sirio for exact measurements and the guy said use what it says in the instructions to the frequency you prefer but only cut one side where the gamma match is.. My mind was completely blown when he said that and this guy works for Sirio, make it make sense.. So I've cut both sides for 27.500 .. L1 & L2 are the two pieces of rod for the gamma match and even those don't make sense so when I get around to putting it up im just going to put the gamma match on and try my best to swr it.. the whole install has been a nightmare if you follow the instructions.. I may do a short video showing where to cut it from.. no wonder people can't get a good match the instructions are awful.

@@DeltaXray444 I will check out one of those mics sometime Glenn, as for being told to only cut the Gamma side of the beam is ridiculous lol

@@gtretroworld Trust me when he said that I was shocked to the core.. I still can't get over what the hell the guy was thinking his logic just didn't make sense, there isn't a single beam in the world that is put up with odd lengths.. Truly blew my mind.

Love you too JoJo 💕, miss our live streams they were so much fun maybe we should dress up for hallows eve.. oh wait we already did that 😂

@@DeltaXray444 🤣 The good old days my love ❤️❤️❤️

@@gazzabyerun9048 Thanks Gazza, I logged him down and will certainly listen out for him again, nice enjoyable contact for sure.

@@Al.26TC101 Hi Al, yes I was surprised at how much his signal held up it's usually like that when using a beam but he said he was using an Antron 99.. I was listening to him for quite a while and his signal never really deviated that much at all.. A nice guy and seems he's got time for more than the usual 5-9, top marks.

Hi Richard, yeah his name evades me too so I just call him Mr Gandalf 😂 We have had a few contacts over the past few days but at the moment the skip is very unsettled but stateside today was crazy East and West coast all at once and every other state in-between.. hang in there my friend it's about to go nuts.

Hi Glen. Yeah the prop has been great this week. To USA I've got loads of contacts already it's been brilliant. So hopefully it will stay for a while now especially over the winter months otherwise it's a Looooooong winter with no one to talk to. Take it easy bud keep safe. WR456🇬🇧 Richy.

Mother nature can be strange.. we have had the Icelandic countries, Africa, Europe, South America Brazil ect ect, America East & West coast, Canada, and many other places around the world coming in today.. but im sure you will get your fair share of it soon enough.

@@missmontyp872 hi there it's been a long time since I've seen you about.. hope you enjoy my radio channel.. I've expanded on the ghost box 😂😂 Hope you are well and life is treating you well stay blessed xx ❤️xx

@user-xs6kn2hb2b From the bottom of the small top section the bit with the capacitance hat on, some folks call it an egg whisk.. i measured up from the bottom where you slot it in 160mm and the swr on 27.555 was 1.2.. On FM for UK CB radio it was 1.3 on channel 40.. On 27.385 it was 1.2.. So well balanced for 11 meters.. hope that helps.

@DeltaXray444 hi so around 6 inches for the top section lableld L.

I can't remember what the top section was labelled as but the very top rod with the capacitance hat on.. all the other sections when put together just pull out from each other and screwed down. its only the top section that can be pulled in and out.. Also it depends where you do most of your talking with the antenna.. I noticed when calibrating the antenna if you only use CB FM 40 channels UK the swr is 1.1 throughout the full forty channels.. It's very rare I use CB FM 40 UK channels so I set my resonant frequency around 27.555 so the channels above and below that frequency have a low swr.. Also the 2016 isn't really a wide banded antenna so anything above or below 11 meters the swr starts to rise pretty fast at the band edges.. Obviously if you have a tuner or a radio with a built-in tuner like an HF radio it's easy enough to get around a higher swr.. but personally myself I prefer a properly tuned swr on an antenna.. using tuners to compensate for a higher swr above 1.5 can create output power losses of upto 10%.. Btw the best antenna I have used for low swr across 10-11-12 meters is the President Himalaya WB (Wide Band) it's an half wave and has low swr right across 8 bands of 40 and the maximum swr was only 1.4 at the band's edges.. Also at my location i didn't notice any difference in performance compared to any of the 5/8th waves I've used over the years and sometimes it performed better.. it's just one of those antennas you put up and it doesn't matter where you are across 10-11-12 meters the swr was always very low.. Sorry for the waffle but I enjoy playing around with different antennas, it's an obsession with me.

@DeltaXray444 I can't thank you enough I've got it set on 555 at 1.1 and on fm 40 it's around 1.3 at .......6,1/2 inches I'm getting great reception on usb now nothing but noise on uk 40 but apparently that's normal lol. Carl this end bud in Newark Nottinghamshire

@@M6MRP Hi Phil, interesting question and to be honest I haven't put the radio on a frequency counter.. but it will go to the next channel, so basically more than 10KC's.. Also the radio works with Span mode so depending how it's set up just by turning the channel selector you can move in 1KC increments on any frequency.. so it will get into all splits.. hope this helps.. but im sorry I couldn't tell you exactly how far the clarifier moves.

@@DeltaXray444 you must be able to get to the 0s if it does more than 10kc try 27.400 just by using the frequency display on the front, I'm looking for a tidy desk radio with a front speaker an dont want to mod it for the 0 in between channels rather leave it stock.

You have a superfine station Chris and it's always a pleasure when we make the contact 73

@MAGNETAR-187 im sure it will have export mode at some point.. most new radios now are either jumper or snip a wire or both and menu driven. like everybody else all those that have an early version I've not seen any information yet as to how it is done.. I still think it will be a bad seller with having a few watts more than the George 2 that nobody will see the difference over distance on ssb that anyone will see on a meter/receive and a few more options.. what they should have done at least is change the design there won't be many people that bought a George 2 will buy this radio.. the original Washington was an iconic radio and also an homebase.. to slap the name Washington on the new radio and it being the same design as the George 2 does a dis-service to such a great old radio.. for the life of me I cannot understand why this radio was even made in the vein of the original Washington homebase.

No it's not necessarily. It's entirely up to you.. it doesn't have to run inline all the time and you can just use it to see what your power levels are.. if you want to use it inline all the time that's fine too.

@@DeltaXray444 thanks; have a great day

Yes they have made some good radios in the past, I have quite a few of them.. good luck with the Washington.. Although with that radio I was hoping for an homebase version of it and not a mobile to keep with the style of the old one. Still a nice radio though.

@@DeltaXray444 Thats true, I think todays technology is so small they will always make mobile versions. I also love home base stations but because they are bulky to ship President makes a lot of their radios mobile. I thought a President Washington like the old model would be a base radio. But they stay with mobile version! The washington is just a George II but 80 watts of PeP. 73's and a happy Sunday!!!

Im Sure someone at President in there design department could come up with a really nice design for a modern day looking homebase.. not just those at President but other manufacturers could quite easily make them.. there is a market for the homebase radio and folks would buy them.. I know Galaxy and a few of their sister companies are probably the last ones to put out an homebase.. Im Not expecting a big box radio like the Jumbo's or Lafayette type but they could make them much more modern with slick looking features. Another reason im disappointed in the Washington are for the reasons you mention here.. Nobody will ever see the difference on ssb with the needle between 60 and 80 watts so what's the point it doesn't make sense.. Also we know President George's surname is Washington but to make a radio identical using the same model seems crazy to me.. it's like they just got lazy and rebranded the George 2 with a few extra features that nobody cares about.. and to be honest there will not be many ham guys who would buy this type of radio for use on the closed bands when you can buy a very good HF radio probably cheaper that is much better, covers more frequencies, and has much better filters with more power and functions overall including an tuner. Take the Yasue 450D it may be a little older but spec wise it is a vastly superior radio in every way you can imagine and you can pick one up second hand in mint condition boxed for the same price or less.. in my opinion I don't think the Washington will sell that well.. just my thoughts.

I've realised many many years ago that ALL antennas in there own category as in halfwaves and 5/8th waves measured to frequency all work the same.. so no antenna regardless of quality or brand name all work the same.. there is no secret to talking skip it's mother nature that does the heavy work, even a very cheap magmount will out perform a beam or larger antenna if mother nature is on your side. One thing I will have noticed though with some antennas receive slightly better than others but only by a needles width or two.. The Gainmaster is very quiet and more so than any other antenna I have used in my location.. as for running power mother nature will out perform 10 kilowatts when she sits above you regardless of which antenna we use.

No the George 2 is similar but different in how it is modified.. My George was widebanded for me when I purchased it.

I would look at AliExpress they do both models.. im not sure if the brand name but they do all come out of the same factory regardless of who sells them.

scotts radios sells this now

Yes it runs on a 12 volt input so putting a cigarette lighter plug on the wire that comes with it isn't a problem, in fact I have a cigarette lighter plug on this one which plugs directly into my power supply.

@@DeltaXray444 how long is the cable on the swe meter do I just need a short cig plug

@@KE8ODY-WV-Ares-Ham-Dad-3O4 the lead that comes with the meter is a metre long around three foot three inch.. I extended mine as I needed it longer to run from my bench to the power supply.. the cig plug i used on mine was the standard size. The lead on the meter is detachable.

Hi Chris.. I'll give you my opinion on how I think President basically need to improve their radios.. all in all they are good working radios but I think they need to get better at the receiver side of things.. so here's my take.. If we are talking better receive overall the McKinley is better than the George and the Lincoln, regardless of what the manual says in adjacent channel rejection (bleedover) it's usually around 60db for each radio but there's more to it on the circuit board than that which makes a difference to final receive.. it's very technical and im not sure if im the right person to talk to.. i can build you a radio but im no radio technician.. I can only tell you from my perspective of how they perform on air.. The McKinley is a great all round performer for received audio.. the Lincoln 2 suffers more not just with bleed over from adjacent channels but also cross band interference by that I mean if you are on say 385 FM as an example it suffers from AM and also SSB transmitted interference more so as it doesn't seem to filter this issue very well at all.. whereas the the George seems much better on adjacent channel bleedover but doesn't stop much of the interference from cross band transmissions.. Basically it's a balance to get it right.. or better should I say.. and I think it's something that those at President could work on.. In saying that all three radios I've mentioned here in certain environments as in a busy area or not all seems to perform much the same as all other export radios, there are good and bad in all.. I do know President are listening and working to better their radios and in all honesty they do work well.. I find the cross band interference on the George annoying when the bands are very busy.. but the same can be said for the Lincoln ie when the channels have less powerful stations around it then radio sounds better.. it's swings and roundabouts with all these export radios but I wouldn't let it put you off as nothing is perfect it's just radio has always been like this from the get go.. it's a tough question to answer so I thought I would give you my opinion and again these export radios from cheap to the most expensive all work pretty good. I read this back and it's sounds confusing lol.. but I hope it helps.. If you want my own personal opinion on the George 2 regardless of any niggles it's a damn fine radio and in my preferred top three of all export radios that I own (35)

@@DeltaXray444 thanks for your opinion on this subject, only that when watching some of your videos I noticed you have the new George and was contemplating getting one. I find the newer Presidents a good size for mobile use, I've had a few Lincoln Mk1 over the years and like them a lot. I do like the 2+ and have great radio reports on it... but it's just those little things that let the radio down. Have been on CB since the mid 70s good old AM days off and on over the years, lived in Spain for 17 years up until recently and was 30ok777 . Once again thanks for your opinion and keep up the good work with your channel.. Regards Chris 26kdx777. Kernow DX Group.

Thank you for the kind words.. It is a very nice radio you will enjoy using it, the receiver is awesome and the clarity of audio is fantastic.

You are welcome friend stay blessed 73

Hi Vincent thank you your station came over excellent and made for a very good contact. Thanks 73

Hi Andy First I have to say it works really well.. Second let me say those at President have taken the Anytone board back to their factory in France and worked on the board with respect to receive and transmitted audio.. and also tidied up a few loose ends with regards to other components on the circuit board so it is a very reliable working radio on Rx and Tx. However the radio does have it's niggles as I call them.. So for starters the channel selector feels a little wobbly but nothing to be concerned about it works well for changing channel and using the menu settings. (You push it in to select the menu) Another niggle is the incoming signal settings when using the RF gain.. it jumps down in blocks instead of smoothly reducing signals when trying to reduce the hiss from the front end noise.. Apart from that it's a very nice radio.. I've had great feedback from using the standard mic but especially using the Sharpshooter mic which everyone says sounds fantastic and definitely gives it a better audio punch over distance when working AM and SSB. Regarding frequency ending in 5/10's yes it covers both as the radio like all other recent President radios has the Span mode.. so I would suggest turning that on in the menu. Do I think it's worth the asking price.. Categorically No.. Like most radio's that are sold in the export radio market these days they all basically do the same thing and I think prices have been raised because of the cost of importing and exporting and also inflation in the current market.. If I was to give these radios a price I would be happy with I would say around £200-£250 tops.. In saying that President have worked on the board a lot and made some great improvements over the standard board that is put into these type of radios.. which is a good thing.. Radioddity have done the same thing with there QT40 model and made it so much better like President have.. If this is why amongst other things I've mentioned above has maybe raised the price then I guess it all equals itself out and the high price we pay may be justified.. It is a great radio and definitely up there with the best export models available.. I will say this though nothing in the export market comes even close to a Stryker 955hpc they are the ultimate beast on air and preferably the Mark 1 version.. the Mark 2 feels very cheap but still works well.. I have both 1 and 2 versions so definitely know the difference in the feeling of them both. Hope this helped you make a decision im not one for justifying the price I pay for a radio because it cost x amount of money for it like many people do.. if a radio has issues I will be open and honest about it as you seen in the video while talking with Simon.. and Simon also agreed with what I said and he is an advocate for President radios.. The RF gain thing could be patched with a future update.. im hoping it does. But all said it is a very good radio and out of my collection of 38 export radios the George 2 is in my opinion in the top three best export radios.. so after testing all my export models my chosen ones are number one the Stryker 955 second the George 2 and third the McKinley. Have a good day Andy and stay blessed. Thanks.

@@DeltaXray444 thanks for getting back to me Glen , the information you have given is very helpful, how have you gotten on with them equaliser settings I put you on to , thanks again 73

@@AndyOutdoorsman I did try those settings but unfortunately for my voice we're not very good, I have a very low soft voice. But they are the best settings I have used so far so all in all they work better than I could have got them so thanks for your advice and input with regards to that.. Oh I forgot to mention the George 2 doesn't have a working swr meter but does have all the other functions for warning settings which are adjustable and the swr can be seen on the front of the radio when keying down and transmitting, Have a great day 73.

@@DeltaXray444 thanks Glen that’s great 👍

I can understood why the FCC don't allow the free band extras because it would contravene legalities with what is excepted under radio law.. But.. in saying that soon after they then allow the free band extras it doesn't make sense to me.. the FCC did the same thing with the President McKinley 2.. weird that.. Anyway my friend I hope you enjoy and have fun with the George 2 and as standard the mic that comes with it works excellent and sounds really good, a heads up though if you want some extra punch with audio the Sharpshooter microphone works absolutely fantastic on this radio.. I use one all the time and get amazing comments about how loud and clear the modulation is.. I've also heard it back many times on recordings over thousands of miles while skipping the pond.. The George has great reception too and the DNR function works a treat.. I have mine set on 2 and 2 for DNR and audio. have fun.

If you put it into export mode yes it covers all frequencies across 11 meters from top to bottom and then some.. but sadly no SSB.. It's just a matter of opening up the radio which is fairly simple and snipping the two white looped wires.. you can see these as soon as you open the radio. There are videos on TH-cam showing how to do the wideband. As standard though it covers AM 26.965 to 27.405 which is the American CB band.

For whatever reason TH-cam held this comment back but I found you today, yes you are correct we did make the contact I have just checked out my log book and there you are.. fantastic friend I hope we cross antennas again in the future.

Hi, I have used many of these types of switching power supplies and never had a problem with any of them, also with other people who have used them they all say they have had no issues either.. I can understand some people may get lamination rattle (hum) buts that's usually down to running a radio and small amplifier on the PSU at the same time and overloading it a little too much.. On my bench I run five at the same time for various equipment between 30 amp and 60amp and get very little noise even when they are all switched on I never really hear them.. As for some being better than others, from those I use although identical but just with a different brand name I also never had any issues or problems with any, they are very stable and very reliable.. A 30 amp will run a 503 with ease and have a little headroom to keep the PSU stable and working well with very little overheating of the PSU .. However I did notice when running the 703 at full output power I had to increase the voltage to 15 volts instead of 13.8 as on transmit the 703 works better with a little more juice and gives the linear it's value output of near to 500watts on FM and the full beans on SSB with ease.. On a 60 amp PSU the 703 will suck around 55 amps so that little extra 5 amps is a little headroom but if the linear is run heavy for ten minutes on FM the PSU's fan will kick in often to cool it down.. i stepped up to a 150 amp PSU which was very expensive but at the same time it gave me zero worries about overloading a PSU.. Im Not sure if I covered everything you mentioned but please correct me if I misunderstood anything out of context.. One more thing running the rack and getting RF feedback of any kind I would suggest using ferrite ring chokes or ferrite clamps along the speaker wires they go a long way to reduce any interference you may get. Again thank you and a happy new year Also always make sure when using a linear to keep all the jumpers of equal length which gives a much better impedance match thus reducing the swr with no spiking.. I would imagine running a 40 amp PSU with the amplifier for the rack system would put less strain and also give you a little more headroom as increasing the audio sound to the speakers will drain more amps from the PSU so it's always better to have that few extra amps..

@@DeltaXray444 Wow thank you for this quick response and advise. You have help me make my decision. From the Great Lakes in Illinois, thank you.

I have tried a few antennas over time to evaluate them here are a few the IMAX 2000 the Sirio 827 and the president Himalaya WB and the Super Penetrator and im currently using the Sirio 2016.. I still say the Gainmaster performs better than all of them.. From 3rd to 1st in my opinion is the Himalaya WB the 2016 and then tops is the Gainmaster.. I tried each over a six month period.. at some point I will be putting the Gainmaster back up.

Hi, apart from everything being more expensive these days cb it's just the same but with a lot less stations on the air Although you do get pockets in certain areas that have many of the older stations that have come back on.. The Lincoln 2 has more options than the George 2 but all in all they do the same, The power levels are adjustable in the menu, most radios nowadays it's not necessary to take the lids off to do any modification work it can all be done from the front menu options with power and deviation/modulation.. The older Jackson and Thomas radios are worth a lot more now than they were forty years ago probably triple or quadruple the amount. I own many export radios like the George and in all honesty they are all about the same there are a few that out perform the others such as the Stryker 955 hpc that's a beast of a radio with plenty of audio and power to boot.. If you wanted a radio that performs well even the cheapest of the bunch will work here's my Superstar 6900n transmitting across the pond this is me at 5200kms talking to my cousin NY-202 Drew stateside today it sounds loud and clear even with low skip conditions you can pick one up on eBay in mint condition boxed for less than £100.. click the link th-cam.com/video/lAtAL5Q2148/w-d-xo.htmlsi=ycUIY-ivuSFtotFz

Hi Lee, I won't say the radio doesn't have issues but it's a good talker on SSB and has great audio and sounds much better using a Sharpshooter microphone on it.. the cross band interference is horrendous (Simon agrees with that) and the digital RF gain is awful and for the life of me I cannot get a proper signal from anyone its either too much or too low and the RF adjustment is set completely wrong (also Simon agrees) there are other niggles with the radio I don't like.. I used mine for about three or four days then it went back in the box.. but just recently for the past two weeks I've been using it again and had some really good contacts, I set my NRC on 2 anymore and it clips around the incoming audio and the Mic noise cancelling is set to 2 àlso. I find this to be the best set up for me.. I've been doing some testing stateside and getting lots of videos back on how it sounds at 5000km stateside and the audio does sound clear but even in comparison to the Superstar 6900 the Superstar sounds much louder and clearer on the modulation (I know who knew) It's a good radio but I've got much cheaper export radios on the bench that work better. Just being honest my friend

@@DeltaXray444 Im using a Turner Plus Three desk mic on mine and getting great reports.

Hi, we finally got down to the issue causing the problem, in the NRC function it can be set to reduce incoming noise on the band and a further setting that can be set for noise cancellation on the mic, it was the noise cancellation option causing the issue.. once the NRC function was turned off completely the radio performed ok.. I was watching a TH-cam channel called Scott's Radios in the USA who covered this exact problem.. once the NRC function was enabled he showed the same issue when a linear was put in line and illustrated it on his meters.. then he showed the difference with the function turned off with the linear in line.. I would never have guessed that would cause such a dramatic problem.. so credit goes to Mike at Scott's Radios. Thank you for your comment it is much appreciated.

​@@DeltaXray444that would make sense, as the NG or noise gate is a mic compressor circuit. I've got a CRT SS-6900V7 and have never used that function.

Where im from when someone is transmitting on an adjacent channel like one or two above or below the frequency you're on we call that bleed over, On this radio the cross channel interference is from stations using the same frequency on other bands mostly strong stations on AM or SSB sometimes FM.

@@DeltaXray444 thanks for that 👍