วีดีโอ

If anyone knows where you can find the EmanG Gitz files feel free to share 😛

Does this include the cost and amount of resin for printing any of the bases

4:43 gave me a heart attack as the sound made it seem like it came from my PC

Thank you for the great tip!

I always leave my resin in the tank, it saves me time and effort. 🙌

Just gonna say, I love your editing style!

some great tips, don't forget resin temperature, that was causing all sorts of problems until i realized it was a factor in fails.

❤

I just use terrarium heating mat with thermostat, works great

I am just starting with resin printing for miniatures for my tabletop games. I am using the water washable resing at the moment but I'm having trouble with the removal of my print off my print bed. after taking the printout and into the wash, when I tried to scarp my print off: 1. my scarper had a very difficult time just getting between the print and the bed AND 2. When I tried to scape/lift it off the bed, the print cracks/brakes. Any tips and or tricks?

Just good ol'... what's on my desk... OH and this $400 scanning equipment I was sent to try for free.

I'm going to buy my first resin printer soon and I am really scared to be totally devistated thinking I'm too stupid for it because I would do things wrong I don't understand, but your video helped a lot :) Now I know what I should look out for! Sure there still will be things that will go wrong because of settings and such, but I know now what other things could happen and why. Made me a bit braver! Thank you very much ♥

The ork on tyranid is very well put together. Great paint job aswell. Excited to see the ork on dragon mech! Also the dry brushed ork looks fantastic to me.

You mentioned fine tuning settings. As many TH-camrs do. But there are no such settings to be found anywhere on this printer. I have the m5s pro. Nowhere can I find any settings on this thing. It prints a couple tenths of a millimeter wider than it does deep. And it prints a couple millimeters shorter than what's in the stl. Don't count on making anything around. Not unless you stretch your STL to make it round. You have to stretch it totally oblong.

i have only just found your channel, but id like to say; that terrain is like your models. you want the best you can have, its the back drop of your story/battle. GW makes some of the best, its just over priced. resin is second. Filament is next and mdf board is the lowest quality and it breaks just as easily. if your running a tournament and time is an issue mdf is fine. however if you want to make your terrain. either do it by hand or 3d print it. there is a difference when your playing on a fully painted 3 dimesional table.

awesome video. i have painted several models for others that were made with resin. and they cracked and wrecked the paint job. when i get into printing i will be using this method.

As an owner of both PLA and resin Printers. dont

Need supports?

Buy yourself a remote sensing thermometer. The sensor goes under your printer cover and the temp readout where you can keep an eye on it. Otherwise you’re just guessing at the temp of your printer.

What is the point of resin printing?

EmanG's warhammer files were illegal and directly ripped from the total war games.

I’m here after I left my IPA under a UV light for 3 days. All sludge

I found y'all on the OPR website news page. This was a good interview. I subbed to both channels. Thanks!

Thank you !!!

Tip: oil up and dry the FEP with PTFE 3 if your prints keep sticking to VAT. Also slightly sanding Build plate. But some buildplates come pre sanded like Elegoo Saturn 3 I believe. I bought a Saturn 3 after too many failed prints with Mars 2 Pro..stupid of me but I'll need 2 for my BJD business anyway...but will try the cone calibration test before printint. Will also get a space heater as its like 60° IN my house always.

yo did you get the goblin gnomes too! Such good little guys!

"I'm just playing to have fun. What the hell?" I play for fun. I have a friend who is max/min specialist. It is almost always NO fun to play with him. Cool! I just saw my name in your video. Now I'm famous.

I do like diy terrain..but sadly limited time means alternatives if i want variety. I personally prefer fem terrain, with .1 layer lines well tuned it can be pretty hard to notice lines..and its robust as heck

Don't forget XPS foam as well, one of the best ways. For me FDM is great for bigger things like mountains and buildings like you said. And I would use resin for mainly minis and some terrain, using resin for terrain can be costly as mentioned in the video but the details are hard to pass up. And for laser cutting, I am more partial to hobby products such as paint racks and stuff to add to your hobby desk rather then terrain. I am just not the biggest fan of MDF terrain, but it is still useful.

You forgot DIY! 😮

UPDATED Video: looking at Resin, FDM and lasercut MDF terrain. th-cam.com/video/Ibx00XELOS8/w-d-xo.htmlsi=N472HkMdkoY7tGwJ

I use two tubs of metho. i dunk and slosh around in my first dirty tub to get 90% of the resin off the print. then when the print looks clean i put in the wash and cure to give a second clean. i havent refilled my tubs in 6 months the my first pass tub is very dirty but all the resin eventually sinks to the bottom.

Thank you for this very informative and concise video! Do you have a recommended slicer software you prefer? I know that can play a big part in 3D printing.

4years FDM and no resin printer but I’ve followed the tech and some of your advice is still useful for makers like me. like splitting up large prints into smaller pieces in case of failure you can reprint the pieces instead of wasting product. Appreciate the candid advice

@5:08 - Dude, all of us, every last person who's ever owned a 3D printer, has a massive pile of stl's we've not yet printed and probably never will.... The better advice would be: "Be sure to scour Thingiverse, Printables, etc. free sites for downloads, because it's way cheaper to accumulate that never-gonna-print pile of files when you're on the free sites than you are on pay sites..... You'll eventually realize what sort of things you definitely will print and probably will print, and the things you probably won't print, and that'll save you hard drive space. :P

Is there a way to reuse the resin that is used on misprints or are they just going in the bin?

Any Chance you can upload the STLs? Emang is offline 😞

Oh man, this is really helpful, thanks so much. A great idea for a video would be more examples of failed prints, specifically what was wrong, and what the solution was/were. eg: I'm getting this weird edge-lifting of flat-bottomed objects, making them look more like cartoon boat hulls. I think it might be a loose or sticky FEP, or plate crowding, or wrong initial exposure time duration, or not big enough skirt, or gypsy curse or something else, but there are frankly too many variables and not enough time available on the local library's "village bicycle" resin printer. So itemizing specific problems as a compilationin video would be gold to me. Thanks!

that's sort of reassuring. i want to get one, but i'm concerned about the toxicity, i have a room in the basement with a window, i could even seal the door. i'm in the west of france where the temperatures are not extreme, i could probably print a good part of the year.

I’ve had major luck on FF with the Dwarves. Also, I can relate about the gf accepting our hobbies 😆 she sees me as a lil kid when I paint and play OPR

Mistake #1. Buying a 3D resin printer :) I corrected that mistake very quickly and went back to my beloved FDM ;)

Mrmodulork makes some cool stuff. I’ve not subbed for a few months cuz he’s on an ork rocker binge and that’s not my jam, but I have hundreds of his stls and love them.

Dang it am I the only one who sees Jackals as Dune style Fremen or is that literally just me T_T Real talk though, awesome interview and I learned a lot. Now I'ma go watch more batreps

Nice video! I wouldn't mind picking one of these up someday.

This is awesome!! Where could I find the files for those stairs?

Great video, was interesting to hear behind the scene stuff.

Thanks for having me on! Looking forward to seeing how this format develops :)

This was a good podcast, had it playing while I was playing Total War Warhammer 3 lol. Justin from @hauntswargaming seems like a great dude and someone who works well to show people OnePageRules.

i tried this and my entire bottles content turned into a jello lol maybe recovered 50 mls of ipa out of 1 gal

You could simply strap a 50w fermentation belt around the resin vat, mine is coming next week.