วีดีโอ

I guess I found some treasure. I came across an old K2 Proflex Beast in Lucern Valley and it has Noleen Chubbys on it. The bike needs new cables and shifters. I just now replaced the tires after 1 year of owning it. It had nice old worn out racer tires on it but I replaced them with CST Rock Hawks. I didn’t even know what kind of bike I found. I’m new to the sport.

Hey sell me some of that inventory you have hanging up there;)

awesome! I raced DH with these forks on my Cannondale super V back in the early 90's.

When I let the air out of my ZEB, the piston fully retracted. What would cause this? Love the vid, cheers!

If you have a C1 it can be vented. It's maddeningly hard to get info other than the official rockshox "reverb c1 vent" video. But you "need" their special tool. The secret is the thing under the seat labeled "vent" is actually just a shraeder valve cap. It's the cap itself that needs to be pressed down to do the procedure; this can be done using an undersized (eg, 8mm) socket on a wrench, and following the steps RockShox gives. (push vent down while seatpost is extended AND holding the seatpost to prevent it from dropping - once in vent position, push seatpost down, hold 2sec, let go of vent position, let go of seatpost). FWIW the schrader cap is 9mm if you need to unscrew it. Rockshox says 300psi but mine was at 200 and still works fine so I'm not going to risk overpressuring it. Bike only has 350 miles on it so I highly suspect it'll sag again even sooner next time, and eventually I'll have to junk it. But for now, this works.

Had a Scott Unishock on my Scott Unitrack CST. No carbon, and it had only coil springs, nothing else. And the brake bridge snapped when I was going to straighten my handlebar

It cleary says on the fork that, "do not use for downhill and free ride"

Just...brilliant 👍👌😎

Where does one get parts for this vehicle? Is there a cross-vehicle compatibility?

Where do you get parts for this?

Thank you so so much for posting this rebuild. Currently restoring a vintage Intense Uzzi SL with Marzocchi bomber bam z.1 forks

I can't figure out how to remove the coil from the 2021 shock. The rebound knob and housing is too big to slide that coil over. How do you do that?

My mate had a pail of Lawil leaders on his Trimble

Just got hold of a pair of Noleens for my mountain cycle Moho 😎

Hello, another question, if one don't have the float x2 sealhead, one have to unthread the piggy bag to get access to the IFP?

Hello, great video. Could you please tell what does the Marzzochi tool do and how else can it be replaced?

Stpd man and stpd video. 🤡

That's such a cool bike

This was awesome man I know I'm late but the info never gets old

That Dr-Zocchi info is priceless thank you

So I have a question, so I have a Trek 6500 and I feel a need to replace the forks, it's over twenty two years old, I think it's time, any suggestions? I need a travel of 63mm and the spacing between the drops for the wheels is 100mm and of course I'd need a v brake config, the only thing that seems to meet the parameters is a Suntour for around $130, I'd prefer a higher caliber name brand although if you'd vouchsafe the Suntour I'd go with that, any suggestions? :)

Very informative but not too long great job sir

The more complicated it is, the less reliable it becomes. Give me the good old rigid seatpost. Remarkable video, though. Thanks.

So, how has it been after a year of ownership?

I love this video and it is very informative! There is a huge budget bike community and youtube channels like Kevcentral and Wolftick seem to use forks like these on some of their bike builds. It's probably still better than the steel lower pogos that come on a lot of big box bikes. I'd still rather have a SR Suntour XCT/XCM coil fork because I know it's durable, I can get all the parts to overhaul it, and it's simple enough even I can open it up and work on it. It's not worth saving a few bucks when there are name brand forks for $200 or less. I bought a Suntour Epixon for $158 just recently. Rock Shox Judy/Recon, XFusion RC32, and Suntour Raidon/Epixon are all great budget options.

Thanks a million, man. Really appreciate the direction on this. There are many videos on Judy XC's, but I swear this one os the most comprehensive and helpful. Cheers, Nico

What's a fair price for one of these? I see there is another one in Washington state. 20k miles. 4wd. It still has all the original fire pump equipment.

Butter mine when I sit on it compresses all the way down I lose air

your videos on this dropper are the best I have found, I literally was about to give up and buy a new dropper before watching your videos. thanks for sharing your wisdom.

What a sensational bike! Congratulations on your care!

I have a question. Can I put 190mm air shaft to zeb R?

hi, from 27.5 to 29, do you have to change the travel as well? (to keep the same geo) if yes 10mm is enough or more? Thanks

The video thumbnail image is a bit deceptive, showing a different model

Hey I wonder if you can help me! I just got a 2019 Ripmo with the Fox X2 rear shock. At 225 pounds though, I'm off the charts for air pressure at well over 300 psi! What shock can you recomend for a heavier rider? What do you think of Cane Creek?

i have some old ass dj 4's (oem kona fork apparently) still buttery smooth and seals are pristine. when i first got em, they were siezed. quick lower service and its working amazing lol

Hey can i put motion control damper on rockshox judy silver tk

Just did a travel change and 50 hours service with the help of this video and the other one. One of the best instructional videos I've ever followed along to. Thanks heaps for taking the time to make this brother 👍

Man quick question, is there specific size for zeb bladder, or its the same with pike lyrik bladder replacement? TIA

This is effing nonsense. I bought an old dropper from PinkBike only to find out AFTER that it needs a service… and THIS IS THE JOB?? Cost to repair is more than the dropper itself. So yeah, NO. I’m 100% doing this at home. I’m gonna ‘science the shit out of it’. I’m absolutely annoyed by this bullshit! All that to say… this video is awesome and what I need to get there.

Wow what a unicorn fork. Nicely engineered.

Step 1: remove Reverb. Step 2: place Reverb directly into trash bin. Step 3: install literally Any Other seat post!

Thanks for the video, gives me a lot of information. At least I'll be able to do a small service, i.e. clean the inside a bit and change the bushings, dust wiper seal and the guidance pins. Unbelievable and shocking how many special tools are required just to do a service !

that butter is sus.... ;)

Thank you for this video. Step by step videos with little nuggets are always great. Late to the party here, but i am looking into doing a C1 rebuild. One part i am caught up on is the set depth. Looking through the rockshox manual I can not find a chart with the required depth. I also can not find a vide with of a C1 rebuild. Is the C1 different than previous models in regards to the rebuild? Thanks.

V brakes, or magura would be likely at that time. Beautiful forks though.

How did I miss the parallelogram bike! Amazing.

I can't be the only one who read it before clicking and thought this video was about making disposable fenders from takeout boxes...

Equip is maybe my new mantra. Thank you for you 😊

I mean it gives you a small, maybe incomplete, glimpse at a different culture. ❤❤❤

Greg, I'm swinging by the shop today and I have a funky headset to show you! Are you still located at 936 Future Prosper Rainbow Court in the heart of the Green River Valley?