วีดีโอ

I’m getting code 1256. Runs for 10mins then stops. Reset and ok again. Can you remember how much the sensor was?

Hello Masood, I had a new Bosch fuel pump installed last week, W210 E320 petrol. I hear the noise when I stand next to the car. Is that normal for it to make noise?

It worked, thanks for sharing!

Great video Honda dealer near me service manager said filters don't ever need to be changed. Sorry but not buying off on that. I bought a 2015 CRV AWD from a friend of mine he changed the transmission fluid every 25,000 miles and used Honda fluids but never changed the filters. Dealer convinced him it didn't need to be done. I have all Honda parts and fluids and will be changing it all out at 94,500 miles. I'll clean the MAF sensor while I'm at it.

Great video

If you have to add fluid you probably need brakes don't add fluid until you check your brake pads. If the brake caliper pistons are open the fluid goes down

My symptoms are different, it doesn't lock in P, but sometimes the gearbox goes into a strange mode while driving. As if it got stuck in one gear and stops switching. When stopping the car, I cannot switch from N to R or P. Only when I turn it off can I switch to P and when I start it again, everything returns to normal for some time. Can anyone suggest what could be the reason?

Thanks for posting, very helpful

Thank U

I have a 2004 Mercedes S500 with over 190K miles. The front of the car has dropped, and I haven't checked for leaks, but I think it's time to replace the shocks. I watched your video, and it looks like a doable DIY project. Thanks for explaining everything so clearly!

Great video! Thank you so much! I did this a couple of years ago but I did not know that you could utilize the engine cradle to brace the bar for the special tool.

What’s another name for this part I’m trying to look it up to but a new one

How often should this be done on a MB SLK 280?

How much is this service if you don’t do it yourself?

ITS A PERFECT VIDEO THANK YOU

This is a Reper you DONT have done at the oil change place, jsut go to an auto parts store, some will do it for free, I just did, they charged 25 bucks for the filter.

Hello Masoud, just a question: Did you work in Bahrain with a Mercedes (Al haddad) car as a customer service job?

Awesome video. Complete information with every detail. Thank You!

@masood-tv Hi, love your tutorials. Could you explain how you removed and reinstalled the ball joint that connects the link rod to the control arm? Did you just position it in the according hole and torqued the nut on?

What tools do I need for this?

Will these filters affect the coldness or warm air flow u am having in my driver side AC flow. I have filled the unit eith 134a and sll seems well- but u get a warm accumulation on the driver side as I drive - a gradual rise.?? Can you give me some input. Thank you

Great video and instructions. Please next time turn down the music or eliminator completely for it is hard to decipher what you say at your low tone voice thank you.

Great video, But next time turn down the music Or eliminate it completely. Cannot really hear the instructions.

Can you post the FCP part numbers? The links are no longer valid. Thanks!

My brake pedal sinks after changing the front brake calipers. They have changed the brake master cylinder, they have bled the ABS module with a scanner and it remains the same. I can't find the problem, any ideas?

I know everyone says to put more than you took out, then get it to operating temperature specific range then take it the extra. I usually measure exactly how much came out, then put back the same amount. I make sure all the fluid that comes out gets collected. And the whole thing about when the fluid heats up it extends is true, but think about it, even if it's hot when it comes out, let it cool on the side, then measure it and put back the same amount cold

I JUST DID IT!!!! Thank You My Friend.

Hello friend. Hector from Puerto Rico. Good video and job. I have a question. I have a Rav 4 2022, the transmition filter is inside and need to open de transmition to change or is like the video outside than can change easy? Thanks for the information than can give to me.🙏🙏

its one of the most detailed video very knowledgeable

Man I wish u speak up a little.

Bro y havent i found this before meanwhile the techs wanna tell u its a special tool to troubleshoot masood u the man brother💯

Somebody who understands how to incorporate music into their videos without destroying the entire video with obnoxiously loud and tasteless music. Great tutorial. Thanks!

No audio?

Mercedes Benz W210 E260 is 2000, I have been using dr.starke 10W-40 oil for 11 years and I change it every 5000 km, will it be harmful if I use 0W-40? Location Azerbaijan. 310450 km.

4matic equivalent?

Did you check the fluid level while the car is idling or off? Thanks in advance

Hello, Does the battery need to be disconnected?

Just swappen my CVT ATM oil, but I did not swap either of the fiilters out. 1. Does the service manual say anything about swapping the filters? Is the filter swap suggested by Honda, or this just extra maintenance that is optional? 2. Can I still go ahead and swap out the upper warmere-filter and two gaskets? Just don't want to drain out the new CVT fluid to remove the bottom ATM filter. Which filter doese most of the filtering, the one in the pan? Great video!

Great vid thanks

Can u change filter without doing a fluid chage

Hi its very helpful video, i want to ask something. 1. Change the expansion first or dryer first? 2. Whats the indication that we need to change expansion? Thank youu

Thanks so much for this video! Lots of very helpful information for me. Wanted to mention that there is no link that works on my end for tools and the hose clamps are not called hose clamps on harbor freight. Rather they are called Fluid Line Clamps about $8 before tax. I searched clamp on their site but it did not come up so I went to google images and found it that way. Also it is worth mentioning that when you say fire extinguisher, I have learned there are many kinds of extinguishers for different fire types. I don't know the one for gasoline but I know there is an oil fire extinguisher so maybe its that one?

I have an empty tank can I use third method just fill a new green fluid ?

Hi Masood - At the end of this video, you comment that air strut replacements do "restore the car to its original factory smooth ride". Let me please ask you an old question of mine: In the case of a leakless pneumatic suspension, what would be the causes of its performance degradation? Have a nice day! Michel

My first attempt to remove the bolt has failed. I've used the CTA Mercedes lock tool, a 30 in 1/2 breaker bar with a 24 in steel tube extension and my 5' 8" x 145 lbs couldn't do it - and it would be useless to do with more leverage, because of my height. Some use impact wrenches on crankshaft bolts and CTA even offers special heavy sockets for that purpose. I've never used an impact wrench on a spinning shaft. Does one need to lock the pulley in this case? And could this damage the engine? Your opinion , thoughts and experience on this.

Amazing video. I always wondered how many bottles i need. You are very detailed. Thank you Masood

Hi, Thank you. Great videos. I have the 2008 B170 (245) with an intermittent hunting problem at intersections when hot. Do you have any suggestions? Also, do you know where the fuel filter is on this vehicle?

Well done. I followed the instructions and found exactly 3.5 quarts came out during the process.

only 2 minutes in, great detail, parts list, angles, thank you

What size little wrench that is you're using for the air line on top of the strut?