- 39
- 962 944
Bad E30
United Kingdom
เข้าร่วมเมื่อ 26 ก.พ. 2014
Restoration of my BMW E30 Touring and S38B36
Ep. 22 BMW E30 Fan Heater Box Full Restoration - Including Valve Reseal
The heater fan box is something that may be missed during a restoration, however I thought it would be best to strip it down and inspect. The foam gaskets were all completely perished so this would have affected the directional airflow.
Now luckily this task does not require a huge amount of costly replacement items, I could have bought a new bmw heater valve and matrix but I decided against this.
It does seem like a daunting task from the outside however it is quite simple once you get stuck in, especially with mine being a non aircon variant.
Parts used:
Heater Matrix - www.ebay.co.uk/itm/145086729266
Adhesive backed foam - www.ebay.co.uk/itm/144647391693?var=443889044599
Harness tape - www.ebay.co.uk/itm/165498029293
BMW gasket - 64111370937
BMW gasket - 64111370936
BMW heater pipe o-rings x2 - 64118377824
Time Codes:
0:00 - Intro
0:36 - Disassembley
5:49 - Foam Replacement
12:23 - Heater Valve Reseal
15:37 - Wiring Loom Taping
16:29 - Reassembly
22:34 - Outro
Now luckily this task does not require a huge amount of costly replacement items, I could have bought a new bmw heater valve and matrix but I decided against this.
It does seem like a daunting task from the outside however it is quite simple once you get stuck in, especially with mine being a non aircon variant.
Parts used:
Heater Matrix - www.ebay.co.uk/itm/145086729266
Adhesive backed foam - www.ebay.co.uk/itm/144647391693?var=443889044599
Harness tape - www.ebay.co.uk/itm/165498029293
BMW gasket - 64111370937
BMW gasket - 64111370936
BMW heater pipe o-rings x2 - 64118377824
Time Codes:
0:00 - Intro
0:36 - Disassembley
5:49 - Foam Replacement
12:23 - Heater Valve Reseal
15:37 - Wiring Loom Taping
16:29 - Reassembly
22:34 - Outro
มุมมอง: 1 048
วีดีโอ
Ep. 21 My BMW E30 Restoration - Sound Deadening Installation
มุมมอง 4.1Kหลายเดือนก่อน
Now it was quite the shame to cover up the recent respray however sound deadening is a must for me. I decided to cover the whole floor compared the factory as I want to dampen as much of the drivetrain/road noise as possible, the difference in weight is only around 10kg more. I won't be using the factory engine bay insulation as I don't have the clearance around the engine, so I installed the s...
Ep. 20 My BMW E30 Restoration - DIY Interior Respray
มุมมอง 3.5Kหลายเดือนก่อน
In this episode I will be continuing on with the interior refresh and completing the respray. Unfortunately 90% of this will be covered up with interior bits but I felt it best to make it as good as the rest of the car. In the previous episode I removed the sound deadening, cleaned up the weld repairs from the underside and applied primer to the bare surfaces. So the first job was to seam seal ...
Ep. 19 My BMW E30 Restoration - Sound Deadening Removal & Interior Prep
มุมมอง 8Kหลายเดือนก่อน
With the underside complete, I have started to tackle the interior to make progress with the project. There was a lot of weld repairs that needed cleaning up and all the sound deadening needed to be removed. There seems to be a lot of conflicting information online about the best procedure to remove the sound deadening, I attempted the heating method first and found it work totally fine and muc...
Ep. 18 My BMW E30 Restoration - Does my S38 swap fit?
มุมมอง 1.5Kหลายเดือนก่อน
Just a quick video, but I thought I would go through the process of mocking up the bare engine before I start on the rebuild. Some slight firewall modifications were required to get the engine in the furthest rear position, this is required as there is not much room at the front. Also lowered the engine by 20mm to gain more bonnet clearance, I have gone past my actual planned height but this ca...
Ep. 17 My BMW E30 Restoration - What is wrong with my S38 E34 M5 engine?
มุมมอง 2.6K4 หลายเดือนก่อน
This is the first video of my new series going through the rebuild of my BMW S38B36 from an E34 M5 which I will be installing into my E30 Touring. What is wrong with my S38 engine? Well, quite a lot. I got the engine on the cheap in 2019 and have been slowly getting every component ready for the rebuild, but there is still a long way to go. In this video I'll be looking at the cylinder bores an...
EP. 16 My BMW E30 Restoration - Getting my E30 on the floor after 2 years!
มุมมอง 7K5 หลายเดือนก่อน
Episode 16, this is the final episode for my 'Parts to Pavement' series. The car is finally back on the floor after 2 long years of weld repairs and restoring all the underside components. All restoration videos for each component, including underside work are in the added playlist. I have decided to leave the car on wheel skates so I can easily maneuver the car if required, hopefully this will...
EP. 15 My BMW E30 Restoration - Complete Fuel System Restoration and Installation
มุมมอง 4.8K5 หลายเดือนก่อน
Hi and welcome to my channel. In this video I go through all the steps of the fuel system restoration, including the tank, hardware, fuel lines and vapour tank piping modifications. With the underside repairs now complete, I am able to start installing all the components back onto the car to get it back onto it's wheels, first up in the fuel system. The tank was in good condition but the usual ...
EP. 14 My BMW E30 Restoration - Complete Underseal Application Process
มุมมอง 138K8 หลายเดือนก่อน
EP. 14 My BMW E30 Restoration - Complete Underseal Application Process
EP. 13 My BMW E30 Restoration - Fabricating E36 Twin Ear Diff Cover Bush Mounts
มุมมอง 4.1K10 หลายเดือนก่อน
EP. 13 My BMW E30 Restoration - Fabricating E36 Twin Ear Diff Cover Bush Mounts
EP. 12 My BMW E30 Restoration - Rear Valance Replacement (including rust repairs)
มุมมอง 5K11 หลายเดือนก่อน
EP. 12 My BMW E30 Restoration - Rear Valance Replacement (including rust repairs)
EP. 11 My BMW E30 Restoration - Rear Trailing Arms - Complete Restoration & Reinforcements
มุมมอง 8Kปีที่แล้ว
EP. 11 My BMW E30 Restoration - Rear Trailing Arms - Complete Restoration & Reinforcements
EP. 10 My BMW E30 Restoration - Medium Case (188mm) Limited Slip Differential
มุมมอง 8Kปีที่แล้ว
EP. 10 My BMW E30 Restoration - Medium Case (188mm) Limited Slip Differential
EP. 9 My BMW E30 Restoration - Driveshaft Restoration (including removal of both CV axles)
มุมมอง 11K2 ปีที่แล้ว
EP. 9 My BMW E30 Restoration - Driveshaft Restoration (including removal of both CV axles)
EP. 8 My BMW E30 Restoration - Rear Brake Calipers - Complete Restoration
มุมมอง 4.6K2 ปีที่แล้ว
EP. 8 My BMW E30 Restoration - Rear Brake Calipers - Complete Restoration
EP. 7 My BMW E30 Restoration - Rear Subframe - Restoration, Camber/Toe and Reinforcement
มุมมอง 14K2 ปีที่แล้ว
EP. 7 My BMW E30 Restoration - Rear Subframe - Restoration, Camber/Toe and Reinforcement
EP. 6 My BMW E30 Restoration - Complete Removal and Preparation
มุมมอง 39K2 ปีที่แล้ว
EP. 6 My BMW E30 Restoration - Complete Removal and Preparation
EP. 5 My BMW E30 Restoration - Front Struts - Complete Restoration & Upgrades
มุมมอง 21K3 ปีที่แล้ว
EP. 5 My BMW E30 Restoration - Front Struts - Complete Restoration & Upgrades
BMW E30 Fog Lights - Complete Restoration (including replacment glass lenses)
มุมมอง 6K3 ปีที่แล้ว
BMW E30 Fog Lights - Complete Restoration (including replacment glass lenses)
BMW E34 M5 S38 - Emissions/Smog Pump Restoration
มุมมอง 2.1K3 ปีที่แล้ว
BMW E34 M5 S38 - Emissions/Smog Pump Restoration
EP. 4 My BMW E30 Restoration - Control Arms - Complete Restoration
มุมมอง 16K3 ปีที่แล้ว
EP. 4 My BMW E30 Restoration - Control Arms - Complete Restoration
EP. 3 My BMW E30 Restoration - Front Subframe - Reinforcement and Restoration
มุมมอง 5K3 ปีที่แล้ว
EP. 3 My BMW E30 Restoration - Front Subframe - Reinforcement and Restoration
BMW E34 Touring Interior - Complete Resurrection (Satisfying Deep Clean)
มุมมอง 72K3 ปีที่แล้ว
BMW E34 Touring Interior - Complete Resurrection (Satisfying Deep Clean)
BMW E34 M5 S38 - Starter Motor Restoration
มุมมอง 2.7K3 ปีที่แล้ว
BMW E34 M5 S38 - Starter Motor Restoration
eBay ‘20 Ton’ Hydraulic Press - First Impressions, Review and Upgrades
มุมมอง 12K3 ปีที่แล้ว
eBay ‘20 Ton’ Hydraulic Press - First Impressions, Review and Upgrades
EP. 2 My BMW E30 Restoration - Purple Tag Rack - Complete Rebuild + Restoration
มุมมอง 73K3 ปีที่แล้ว
EP. 2 My BMW E30 Restoration - Purple Tag Rack - Complete Rebuild Restoration
BMW E34 M5 S38 - Alternator Restoration
มุมมอง 2.9K3 ปีที่แล้ว
BMW E34 M5 S38 - Alternator Restoration
EP. 1 My BMW E30 Restoration - Front Subframe Assembly - Dismantling
มุมมอง 3.2K3 ปีที่แล้ว
EP. 1 My BMW E30 Restoration - Front Subframe Assembly - Dismantling
BMW E34 M5 S38 - Air Intake Plenum Restoration
มุมมอง 7K3 ปีที่แล้ว
BMW E34 M5 S38 - Air Intake Plenum Restoration
Amadeal CJ18A 7x14 Mini Lathe - First Impressions, Review and Upgrades
มุมมอง 31K3 ปีที่แล้ว
Amadeal CJ18A 7x14 Mini Lathe - First Impressions, Review and Upgrades
Next time out the steering rack bolts from top of the car to the bottom. In case the nut is loosing, the bolt will stay in place, and you can feel it, now if the nut come loose, the bolt will fall to the ground
@@dhstube for the usual job this is how I do it, however you’re unable to remove the bolt if it is upright due to the engine being in the way. So the correct way is to have them bolt head down, this is also how it is from factory!
christ, I'm glad you remembered where everything went back!. top work Liam...
This is why I have to film everything! I’m absolutely useless otherwise
@@BadE30 😄😄
Great work, looks amazing. May as well change the blower motor and the resistor, while it's all out😅.
The motor was tested and working, but i must admit I forgot about the resistor until reinstalling it.. it is on the list!
Good job. I plan to do same for my E36 soon.
Nice, good luck with it
And how much did you pay for pistons
Hi mate where did you get the pistons from I need to get a set for my m5
They’re CP-Carrillo custom size and CR pistons from VAC Motorsports in the USA. Were around £1200 IIRC
Did you get the cylinders bored before you honed them ???
This honing was to remove any scoring before measuring. Once honed clean, the bores were way out of spec, currently with a machinist who is reboring for custom over sized pistons
Is there zinc and nickle in the solution or is the title saying it the same process because I want to plate it with a zinc nickel alloy
exelent job. thank you very much for detales. you halped me in my job. Maybe you know rod thickness. My is 26,0mm know. Is it standart ?
Nice job. Im planning same for my E36 Compact. Preparing my garage.
Amazing results! How'd you get around the hydrogen embrittlement?
Hey thank you for you❤ can you tell me please what is the voltage? This one piece? Thank you!!
❤❤❤❤
Have you had any issues with the install of your brake pads? I also bought the 35mm frenkit cylinders but my brake pads wont fit because the inner diameter from the cylinder is different?
Nice job again 😊
Nice work 😊
Hello Bad e30, Really nice work and video, couldn't hope for better. I have only one issue, on one of the fuel tank protection plate, I broke one nut because of the rust. Do you know if the thread where you screw the nut is part of the frame or is removable?
Hi. I'm new to lathes. Does the play you mention matter in cutting threads? A friend of mine would sell me his Myford ML7 with gearbox and few accessories. Problem is, that I'm planing to take this lathe to Poland and we use metric while this lathe is in imperial units. Do you think I should get ML7 for £800 with chuck and cutting tools or this one from eBay without accessories for £650 and have preferable metric units. Or should I just stick to tap dies for the threads on ML7. Your expertise is much welcome.
Doesnt the primer need sanding? Just curios, usually people sand quickly over it after applying it. Nice work otherwise, really nice, you sure roof doesnt have any bubbling around it of around sunroof? Better do it once and propely and ik you put sound deading in already put did you let it cure for like a week atleast?
Primer was etched before paint, no rust around the sunroof and paint cured for a week before sound deadening!
This looks mega, love E30s! Subscribed :)
Thanks dude!!
Do you mind if we share a link to your video? Thanks. Chris Ce Chem Limited
Hi, feel free to! Thanks
Nice. Did my old style defender, closed cell foam over the top, game changer. Don’t forget the roof!
Nice man! The roof will be done soon, I totally forgot about it doing this..
Nice job, and definitely a wise move! 😄
Thanks dude🫡
Looks good. Will you be adding anything on top of this or to other parts of the car like doors ? Also will you be using any cavity wax (think that's what's it called in english) on this car ?
Thanks! Yes will be doing the doors and more in the boot pockets too. I will be cavity waxing the car once i have it at my friends car ramp
Cant wait for the carpet install.
Is it really that ugly?
Im installing my carpet on my E30 soon and need to see whete you place clips for door sill trim👑👑👑👑
@@blockpartyvintage1568 haha! Yeh nice one, shouldn’t be too long now. Wiring to do first
How many packs of insulation you bought? 1 or more? 1 pack has 34 sheets? Correct? I have E36 Compact, no idea how many square meters it is.
2 packs dude, comes to 6.8sqm. Used about 1 1/2 packs so far but still have a bit to do including the doors etc
Great job! Im sure your work will pay out )))
Thanks!!
@@BadE30 😉👍
What tool did you use to bend the brake lines? I see you using a blue one and a black one? Can you share? Thanks.
Hopefully these links work: This was used to fettle the bends www.ebay.co.uk/itm/266532137363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=PvQYzm1rRPm&sssrc=4429486&ssuid=ACytoiAGSdC&var=&widget_ver=artemis&media=COPY Main pipe bender www.ebay.co.uk/itm/394782397079?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=uuoq0_kctbs&sssrc=4429486&ssuid=ACytoiAGSdC&var=&widget_ver=artemis&media=COPY
just love the process.
It’s great fun when it goes to plan
Vidio yang memuaskan..apakah bisa saya belajar dengan anda?
That bloody Brad guy gets everywhere!!!!!!!!! 🤣Top job 👍
😂😂
Looks brilliant to me mate and I’ve done several of these too, good work.
Very nice! Thanks
sod not being professional! that's about as good as it gets. Amazing work from both of you, and you're outside...on a driveway...bravo gents.
Haha thanks Matt
great work mate...I'm coming to the realisation of not using POR15 on my sills if the Mipa primer is good enough corrosion resistance...did you weld through the primer or did you have to grind it back?.. great work as always !
100% would recommend the epoxy primer! You need to grind back areas to weld then can re coat afterwards
@@BadE30 cool.. cheers mate
Nice job but get a proper respirator mate
100% mate, our mistake
This channel is making me feel so bad for my Dakar E36 resto! almost 10 years ago now i removed all the rust, changed all the pannels that need changing and so on, then had to move to anther location and from then on it just been sittiing
Nothing wrong with a long project, we all have our own live and the car will always be there when you want to start up again! I’m about 8 years into mine, quite a few year breaks too
Might do this on my project as well, how many liters of body colour paint did this roughly take?
Just over 1 litre! Luckily had 2l, no harm in left overs just incase
That color looks sick! Nice job man
Yes can’t wait for the exterior to be done now!
I’ve done this many times over the years building cars from chassis up on my parents drive as a kid , I admire anyone who is striving for perfection with less than great facilities 🙏🏻👍🏻😉
Cool as dude. Sometimes I wish I had more space, but it’s great to have it in my back garden
Brilliant video as always 👏 👍
Thanks Pauric!
The attention to detail here is incredible.
Thanks! Trying to keep the standard as high as the underside of the car
that is so cool bro
Thanks man!
Well done and it's looks really good, patience and time that's all 1 needs. Thanks for documenting your build, enjoy watching!
Glad you enjoyed it