วีดีโอ

😂😂😂😂😂

Why could you not have just screwed the I-let off of the shock shaft, used the original mounting hardware on the top of the shock and mounted it right back in the original configuration? Wow.

What is the power V and A

❤

My friend had to change the pump and it fixed the problem.

I just ordered one… cheap is one reason ($20 bucks) two, better than nothing.

did stock impeller hold up to brushless upgrade??? thanks ,it really ripps nice

Did you ever get this resolved? If so, what fixed it for you? Thank you!

Tell, how many revolutions per volt does the motor have? KV?

The start up sounds good but the revving sounds like a space ship or something. Weird.

Hello. Is there a way to remove the brake noise when reverse is applied? th-cam.com/video/NxnncaoblXE/w-d-xo.html

Or if you have a barrage gen 2 sitting in your room in pieces just use the parts! There even the same axles!

Tires, shocks, bigger battery are needs. I'm from North East Ohio I paid 171 bucks for mine. Oh well it'll be a good competitor for the bully

Wowwwww dimana saya akan memdapatkan nya

They sound like old computer car sounds

👎

nice video, they make gaskets for that now you can purchase from their store so it made it even easier!

Thank you for good video!

Yeah GREAT VIDEO! So simple, yet so much information ! Is it possible to mount a 2 speed transmission onto the 1 speed aluminum tranny??

keren muantap

Excellent work bro! Subscrible!)🥰🤩💥💯👍👏

I was wondering what performance increase would be given on the single speed gearbox using a 2S Lipoly instead of the supplied 6V Nicad. With the 6V Nicad the C24 covered the length of my entrance hall in 19 seconds, with the 2S Lipoly 15 seconds. So it's about 25%. I have not checked if the motor would heat up too much with 2S.

I finally got one of these. I ended up just swapping out the ESC. I didn't put any of the decals on mine. I'm going to paint it into a snake theme so that it can maybe scare some of the people around the pond.

I know it’s been a while but what kv was that motor ?

Awesome Video !

Can we use shock mount on that too???

The sounds are so bad when you accelerate... Way too high pitched to be realistic

Hi I also upgraded to a 2s motor but the rubber between the couplers is grinding against the plastic sides because it swells with the brushless power. Do you have the same problem?

すばらしい😊

An esc with a brake or reverse would help it self right. The one you used looks like it was intended for aircraft. That little sucker was moving. What kv and cell count did you use?

Should be install a cooling system for esc and motor?

Thx! Im going for the single speed

Couldn't you just put a hole in the tire?🤷‍♂️

Did you remove any leaf springs ?

Thank you for this video it helped me make my decision I'm getting the two speed in metal gears

I m thinking of also putting some water cooring inside

The reverse sound is a dealbreaker.

Those speakers can fit in my Honda Civic 😂😂

Thank you this video was really helpful I was about to buy the 1 speed I wanted faster haha almost bought the single bc its stronger but I assume the 2 speed will be strong enough

Wow do they have one for kraton 4s

Fake

What tires are those?

Everything better about the 2nd gen: The axles are wider, the shocks are on the outside of the chasis, the motor is bigger, the truck is faster, the tires are better & 4-link suspension. Did I miss anything?

I have both & there really is no comparison. Basically everything they did wrong on the first gen, they corrected on the second gen.

I use a piece of one sided adhesive foam pad I got at hobby-lobby and made a gasket with that. Also my kit came with 4 very small outside diameter 3mm shims, If you put 2 of the shims on the outside of the each input shaft, attach the drive shaft to the input shaft before assembling the axle. Make sure the input shaft is all pushed against the inside of the diff cover and there is no play, it'll work with very little binding.

Or maybe the pinion gear is on the wrong side of the axle?

thanks for posting , always wondered about the 2 facebook.com/groups/705990983674436

Full throttle?

Did the cavitation happen with the 2s? Just wondering if the 3s weight caused the cavitation? Let me know if you did any other mods and if you ever tried at full throttle. Thanks for your video

Thanks for posting this. I just got into the axle assembly procedure and was dismayed that the first axle I tried to build was a no-go. Too much binding and I can’t close the gear case up without small gaps. This gasket/shim idea seems like the easiest fix. I’m going to use paper though and make several so I can gradually build up thickness.