วีดีโอ

Hey can i ask u a question? So i run my plugin via live professor for the VST Host. When i setup the input it works, but when i setup the output it's not work i mean there is no signal come into my mixer. I already change my patching input via DAW. Any idea? Thank you

I got the most fussing of my life for putting reverb on one drummer's snare.

Hello sir I just brought ui12 and I want to use aux out as a in ear monitor and I also brought behringer pm1 but aux out signal goes to only left headphone not right side I checked everywhere to not doing pan left side and I didn't but when I checked master output it's hear left and right If you have any solution please let me know Thank you for advance

Just to clarify, pink noise is played though the speakers and channel 3 is actually the measuring microphone.

Really Need just discovered this from a post on Reddit. It's really too bad it can't be powered from either end I could see it being stuck in a rack next to the mixer with the power brick but I'm guessing that design doesn't allow powering it from the other end. This would also make an interesting POE Dante endpoint. But I'm thinking both of those would require a revision and or new version.

this is almost made to make me buy it. Im a big Prince fan, and ima thinking about upgrading from Midas MR18 to Ui24R 😀

Thanks for this important video! I need a little help. My UIR24 don't maintain any preset on boot. At every boot I must reload one of my preset. Is there some battery to preserve the data of last show? Thanks for helping!

I am surprised that you did not mention the antenna breaking off as both of mine have they seem so fragile, I may have to rely on a router`s antenna. thanks for the detailed video. Regards. Gus

Great Video, both my antennas came off and wifi is a bit weak, would you know if this affects USB Flash I can view the UI24R on my ipad but when I place a USB stick in the port nothing happens, would this work if I upgraded the to the latest driver/firmware? Thanks. Gus

Hello! I have a question. Can I send a live stereo mix of the master via USB to another computer? For example, sending my stereo master mix to another computer that wants to play it along with the video of a live show via streaming. Thank you so much!

Buongiorno complimenti per i tuoi video.gran bel lavoro..Volevo chiedere se esistono aggiornamenti da fare su tutta la serie UI 12-16-24. Grazie

Hola buenas noches!!! necesito de su ayuda URGENTE por favor, tengo la soundcraft ui24r, y al utilizar el "more me", hago todos los pasos para ocupar los in ear, asocio el Aux, y los canales que quiero de retorno, pero no puedo tener audio, alguien sabe porque ocurre?

can you send me this file ?

Quick Question: Is there a connection on the reset button? Wire? Clip?

How many channels can be grouped into the automix?

Thank you so much my dear brother for good information 😊

I'm so confused. I'm using the ui24r with reaper on a mac. How can I get it in my headphones from reaper with a click! Shouldn't it be able to come through an Aux or one of the two headphone jacks on the ui24r!? If anyone can help please chime in.

Is there a way to change FX parameters with the CUES? I know I can use the SNAPSHOTS but in live performance, it's lagging in the middle of a song so not possible to use it.

Nice video thanks! great song and band.

Muchas gracias por tu video!!!

Thats cool. Gives me some ideas!

I have electrocution issues with my ui24r. The body of the mixer and all cables are frying. I've only purchased the device few months back and used for 3 - one hour sessions just to save two basic mix scenes (didnt have the problem during the first two uses). What could be the problem? I could add a ground pin, but I'm looking for a permanent solution than that.

Can this be used like ducking?

Great scary video...........why no earth shielding on you're wrists, anything could be blown !!

Hold on just a minute, this means I could use Arduino to turn an LED strip red when the DJ is running too hot out of the mixer, or an mqppt message to a galactic unicorn!

Can i set this with multiple monitors. It be easier with 3 monitors

Hello! Can you please direct me to the video where you explain how to isolate a channel while using virtual sound check for talk back?

Can we cascade two UI16R?

Great tutorial. You obviously know your stuff. Fantastic video. Was this a studio mix of a live show by the way?

Hi! Is it possible to send sound from the mixer over the internet to the GUI client device? Like for example monitoring the sound with headphones, without needing to be physically close to the mixer? Also is the source code open-source so it can be extended if needed?

Can Pink noise be played through the DAW doing the same EQ process using the mikes our singers use ?

Ui24R - channels 8 and 18 have become noisy and channels 10 and 20 have input levels but no output. Any ideas?

My UI24 not resetting, green light keeps on blinking forever. I tried different USB Flashdrive (Fat32) still not resetting. I reset because only channel 3 is working the rest don't work. RTA have signal but no sound and no green signal. Please help thanks!

Thanks a lot for the excellent video! I've been using the Ui24r since 5 years - one outage only (related to the wifi settings) - no temp issues as it is mounted in a ventilated rack. This how-to is now part of my bookmarks - in case i come across something. Much appreciated! :-)

This was a well explained super helpful video.

Good band

i appreciate the speed of your voice. It is reassuring for an old guy like me who is new to all this. We have used the Soundcraft UI2 for solo performance keyboard and singing and appreciate the presets. I don't fiddle with it much. Now interested in using a DAW and that is a stretch but looking to learn. Mostly for live performance pitch correction and vocal effects. For DAW, probably Studio One from all the TH-cam vids so far seen. So, figuring to use the UI mixer as the audio interface (hopefully) and to amplify another commentator's question... to use waves plugins, do physically connect to the USB interface on the mixer with the computer?? with male USB on both ends of the cable?

Have you found a way to reorganize the snapshots and cues? You know, after programming you find out, that the order is wrong, and you want to move the snapshots and cues to another place...

Nice explanation 💯 Spot on!

Hello ! At first thank you tutorial, it's very sympatic. I have a little problem with me two UI : it's don't signal for the remote in the chanels 23&24 for the Host. Can this come from firmware versions (V3.3 & V3.4) ? I scrupulously made las the vidéo, and nothing signal. Thank you for your answers. Michel.

Can I use a condenser mic instead?

Can the Ui24R record to a USB SSD?

Has anyone used this in Cakewalk?

Then i upgraded from factory version to vers3.3 i got issues with the WiFi connection any advise?

Hello, where can I buy a motherboard for UI24R?

Hello, do I need to have some interface to be able to control the lights from the UI?

Can you use UI24R to record audio together with video like recording a leacture in class?

Do you have any suggestion for somebody (like me) who may have bricked the software? Is there are certain board that powers the software that can be replaced if the UI will not load no matter how much you try and reset the mixer? Thanks

4:18 - touch screen?

Saludos excelente video tienes nuevo suscriptor. Podrías ayudarme mi ui24r no inicia solo se queda en los leds verdes cheque la cpu y el fusible f1 recibe el voltaje correcto 5.20 v pero a la salida lo baja a 3.33 volts crees que sea el fusible? De antemano muchas gracias saludos desde México