วีดีโอ

Hello, good morning, does that same configuration in betaflight also work for tinyhawk 2 freestyle????? I thank you for the help because I'm going crazy, it keeps speeding up.

Thanks for this Videos Man.

I have Flysky FS-I6S Transmiter and Reciver will I be able to use them?

Hi, can I pleas ask you for help? I just bough a new Mobula6 RDF kit with LiteRadio SE ( same as BetaFPV LiteRadio 2 SE ) . Unfortunately I didn't know yet for the common problem with the wiping all of the setting when the battery run out of any juice and after I bind them and fly for a while this happened. I didn't have any dump file save or whatever else I need it to be backed up. Now I'm struggling to bind them or adjust any settings. Any idea how to deal with this ? Thank you!

Hey Georgi, I hope you are doing well. I see you haven't made any videos in a very long time and I hope all is well with you and your family. Do you still fly FPV at all? I just recently started to get back into it and blew the dust of my Modula6 and was going through the settings and decided to watch this video again.

What kind of fpv goggles you running

I have a commando 8 and when I go to enteral RF all i can select is multi for the mode and nothing else how do i get it to d8 mode?

What is beta flight? I’m new to Fpv, hoping to get this as my first Fpv drone

Great review Mobula 7 ! Is the only way to watch recorded videos is to remove Microsoft card from drone?Any other way with usb connection?

I bought the mobula 6, and it came with 4 batteries of 1s 300mah 30c, I can use one of 1s 380mah 60c has 0.5g more than the original.

There are no files on my sd card no config files

there is no camera config.ini file!!!! please help also no led going to green after qr code

my radio is not looking for my drone radio master tx12

The fun it brings is well worth $20!!!

Can I use Emax goggles for mobula?

I am watching in 2k, and still not good for me, but it's still cheaper than gopro lol

Thanks great info, we have subscribed

Hello, when I crash into something the drone lose control and accelerate fast so I can't do anything. Any advice?

What means XV?

what is the maximum speed?

hey, I really want to buy this phantom to start in the hobby but I don t have any radio transmitter. IF I take the XM+ receiver, which transmitter do you suggest me ? thank you so much.(PS: if some of you I the comments have also a lot of experience , I would appreciate a lot 😊😊

Hi mate! I followed your exact steps with JESC on my Mobula6 and now when I try to arm it I can't and always get the error message "RPM filter". Do you know how I can troubleshoot this?

Can I control it with an E6 controller?

Good vid, very helpful, Just ordered one . Looks like a great budget bag, £23 inc postage from a well known auction site UK. Jon&Denise

Does the camera connect to your phone for control?

I installed Bluejay with 48hz on my mobula 6. It reduced the current during the flight and increased the flight time a little, however sometimes it fails safe where it doesn't happen with original firmware ESC. Sometimes one of the engines does not turn on and the drone does not take off. I have already configured the motor start parameters, even so, sometimes one of the motors does not start turning. I think 48hz and 96hz for tinys is good but have some problems.

Good review for beginners 👍... May I know what googles you are using?

I followed your instructions and my Mobula 6 HD had problems. When I armed it one motor would not spin but jerked and stuttered. Another one did the same off and on. Could not get into the air. I reflashed, did a different version lower on the list. Finally after flashing and reflashing, changing the sequence of connection to the configurator, plugging the battery in first , not plugging the battery in at first, etc, etc. I FINALLY hit on some sequence that made it work. It was scarey because I thought I'd tanked my Mobula. I did my two Tiny Hawks. The "S" model loaded without a hitch but my original Tiny Hawk had the same problems as the Mobula but I got it finally done too. I actually had to go into BHeli and reverse a motor that had now was spinning the wrong way! Took me a looong time to get these done and I don't know if I'll do my more expensive 2 and 3s whoops. I wish it was simple as it was for the one Tiny Hawk then I could trust it more. BTW, I did finally get the proper version onto them not the 2.2ver that was lower down on the menu.

Finally great video, with step-by-step instructions. Thank you very much! Quick question, how do you arm the drone please ?

Almost 20,000 views but no one subscribes. I really don't understand people the likes and subscriptions are free. Brother thank you for the tutorial really helped me a lot. liked and subscribed.

I recently purchased the HD version and it came with 250Mah batteries. I don't know if this is due to battery availability or not. The battery fits perfectly in the holder on the model. I have not flown a full battery yet so I'm not sure of the flight time on these batteries. I'll post back once I know what kind of flight time its good for.

how can i have the controller connected to my mobula whilst its plugged into betaflight. I know lyour not supposed to plug in bettery and micro usb. Can i have some help??

Very informative video thank you :)

I think the frame is great, it's like a miniature freestyle. I put the larva x hd guts with 1204s and on 3s it's a rocket!

love these videos where everything works PERFECT. Totally not the case.

How come all the videos ive seen on this drone got good vtx range yet mine loosing vtx signal at about 3 meters,,is it some thing to do with the bands ?

Would the hex files be different for a moblite6?

Bro..... get to the point... nobody wants to watch you turn a fucking wrench

Thanks. How can I record in 4: 3 resolution? What are the settings for runcam5?

Can I upload the pmb file even though I have a crazy bee f3dx

Awesome video really cool seeing the comparison to the split cams

i am getting a ton of prop wash with the avan rush 2.5 might have to do a pid tune

If i fly this in a lot of wind will this be a good upgrade? Or is this for indoor racing

I got scared at first because the beep start up sounded different but the. I realized it’s because i just flashed the esc’s

I have a Mobula 6 HD that I converted to a 75mm frame and 40mm props. My question is, can I load PMB settings or EMU Flight onto this set up and get benefit? I love having a HD camera on a whoop but frankly this quad has always flown "wonky" for me both as a 65mm and now as a 75mm. I recently changed the throttle setting to 75% in my Open TX transmitter. This helped some but it still is not as manageable as other whoops I fly. My Emax Tiny Hawk II for example. Any suggestions?

I've been flying and building quads for almost 5 years and im charging up my mobula 6 right now for rhe first time and im stoked i dont have to set anything up in betaflight accept my rates glad i found your video its a good one verry informative and on point i subbed

hi i want to know if i bind it to flysky controller can i just fly it without beta flight??

My Phantom came with a defective motor and I made the decision to replace them all with 1103 Iflight motors. A couple tips in your video really helped when I encountered issues, thanks!

New drone, check all screws and nuts prior to flight… you never know when the one you got was put together on a Friday, at 4:45 in the afternoon, by a distracted assembler.

Hi. I have a non eu Taranis x-lite & GEPRC skip 3 but it will not bind. Any suggestions...I'm stuck :/