Skyzone 02x - Best value all in one FPV goggles for 2019 (review, setup, sample DVR footage)
ฝัง
- เผยแพร่เมื่อ 5 ก.ค. 2024
- 👓 Skyzone 02X - bit.ly/skyzone-02x
👓 Skyzone 02C - bit.ly/skyzone-sky02c
📝 Skyzone 02X Full Review and Setup - blog.georgi-yanev.com/fpv/sky...
📼 More videos with DVR overlay on my other channel:
• This is what i see whe...
• Foggy FPV on huge open...
📡 Antennas:
Aomway clover leaf omni antenna - bit.ly/aomway-antenna
Realacc tripple feed patch antenna - bit.ly/realacc-triple-feed-patch
90 deg SMA male to female connector - bit.ly/sma-female-right-angle
In my Skyzone 02X review I try to go over the things I wish I was told about the goggles. We go over the full specs, take a look at some sample DVR recorded with the goggles, we discuss what antennas to use and about different functions and modes of the goggles.
---
TABLE OF CONTENTS:
0:00 - Intro
0:06 - Unboxing
0:32 - Accessories
1:20 - Sample DVR
2:13 - Specifications
4:05 - Full specifications
4:12 - Quick start with the goggles
4:47 - Rambling on antenna choices :)
6:16 - My antenna setup
7:26 - Functions, buttons
8:48 - Conclusion
---
📝 FPV guides, tips and tricks, shopping lists - blog.georgi-yanev.com
Share your FPV spots and browse community spots at:
🗺 www.fpvtips.com/fpv-map/
📖 Read more about FPV at:
blog.georgi-yanev.com/posts/?...
www.fpvtips.com
---
THE FPV GEAR I USE:
All of the FPV gear I use - blog.georgi-yanev.com/fpv/gea...
👓 Goggles:
Skyzone SKY02X - bit.ly/skyzone-02x
AOMWAY Commander - bit.ly/aomway-commander
📡 Radio transmitters:
Taranis X-Lite - bit.ly/taranis-xlite
Taranis Q X7 - bit.ly/taranis-qx7
🎒 Backpack:
Realacc Drone Backpack - bit.ly/realacc-backpack
---
🚁 THE QUADS I FLY:
Emax Hawk - bit.ly/emax-hawk-5
Eachine Wizard x220 (heavily modded) - bit.ly/eachine-wizardx220
Set up and upgrade your Wizard x220 - blog.georgi-yanev.com/posts/?...
Mobula7 HD - blog.georgi-yanev.com/fpv/mob...
Eachine Trashcan - bit.ly/eachine-trashcan
Read the review here: blog.georgi-yanev.com/fpv/unb...
Custom quad build - blog.georgi-yanev.com/fpv/bui...
---
🔝 Recommended FPV Gear
Fatshark HDO - bit.ly/fatshark-hdo
Fatshark Attitude v5 - bit.ly/fatshark-attitude-v5
Skyzone 02X - bit.ly/skyzone-02x
AOMWAY Commander - bit.ly/aomway-commander
Realacc Drone Backpack - bit.ly/realacc-backpack
Taranis Q X7 - bit.ly/taranis-qx7
Taranis X-Lite - bit.ly/taranis-xlite
---
🚧 Drone Parts:
Camera - Runcam Split Mini
Banggood - bit.ly/runcam-split-mini
VTX - Eachine VTX03
Banggood - bit.ly/eachine-vtx-03
Receiver - FrSky XM+
Banggood - bit.ly/xm-plus
Flight controller, 4 in 1 ESC stack - Holybro Kakute F4 V2 Flight Controller Tekko32 35A 4 In 1 Blheli 32 3-6S Brushless ESC
Banggood - bit.ly/kakute-f4-tekko32
Motors - BrotherHobby Returner R2 2205 2800KV
Banggood - bit.ly/bh-returner
Frame - Realacc Furious 220mm
Banggood - bit.ly/realacc-furious
Props - DALPROP T5045C Cyclone 5 Inch
Banggood - bit.ly/dal-prop
---
SUPPORT THE CHANNEL
Patreon
/ fpvtips
PayPal
paypal.me/jumpalottahigh/5
Subscribe
Fpvtips - bit.ly/fpvtips
Georgi FPV - bit.ly/georgi-fpv
---
SOCIAL MEDIA
Discord
/ discord
Instagram
/ fpvtips
Twitter
/ jumpalottahigh
/ fpvtips
Blog
blog.georgi-yanev.com
Github
github.com/jumpalottahigh
---
Links to Banggood are affiliate links and would support the channel if used to make a purchase.
#skyzone02x #skyzone02c #fpvtips - วิทยาศาสตร์และเทคโนโลยี
![[UNCUT] ฝันรักห้วงนิทรา | EP.9 (3/4)](http://i.ytimg.com/vi/ikd1tEhXbp8/mqdefault.jpg)
TABLE OF CONTENTS:
0:06 - Unboxing
0:32 - Accessories
1:20 - Sample DVR
2:13 - Specifications
4:05 - Full specifications
4:12 - Quick start with the goggles
4:47 - Rambling on antenna choices :)
6:16 - My antenna setup
7:26 - Functions, buttons
8:48 - Conclusion
Very informative video thank you :)
I have one set. The setback I find is that the top buttons can be accidentally touched when putting or removing goggle from face. A sliding drawer to cover the buttons would have solved the problem.
Thanks for your input, I could see how that could be an issue in some cases. Never happened to me even once though so far.
Review helped out a lot
Awesome! Really happy to hear it!
I realy like your reviews 👍.
Looking forward to see more from you.
I hit that sub... 😁
Thank you sooo much 💙! I really appreciate it and you taking the time to drop a comment really makes me wanna keep going. Thank you :)
is there a video on how to find the correct vtx channel.
Not that I know of, but generally speaking, you want to SET the channel on the VTX (usually using smart audio OSD and your controller, in other cases by pushing a button on your VTX), then just change your goggles' channel to that same channel and you're set :)
Love my Skyzone 02s, tempted to get the 04X now .. Not sure it's worth twice the price tho
I've heard a lot of great things about hte 04's not sure if the upgrade is worth it though. Up to you.
@@FPVtips Santa has them on the waaaay
New sub here
Sweet! Welcome to the FPVTIPS community! I really appreciate your support 💙
Is it possible to power the gogfles via usb?
Not to the extent of my knowledge. It might be moddable though, but I haven't tried that or seen it in the wild.
Hi there,
I wondered whether, like me, the foam of the Sky02x is starting to desintegrate?
I was looking for replacement, maybe a thicker foam, but couldn't find anything valuable. Have you ever considered printing a new faceplate and using Fatshark foams?
Thanks!
Great question. I had this happen to me on my previous goggle - the Aomway Commanders v1 (oldest ones). I do not have any issue with the foam on the Skyzones, it's as good as new, and I've been using them A LOT. I did expect it to disintegrate quite quickly, but pleasantly surprised so far, and I'm using the regular face plate foam, not the "leathery finish" one. I'm not sure if a 3D printed faceplate would hold up, but I would imagine so, that would make for an interesting project. I know the Skyzones 03o's come with 2 different faceplate options, so if those would fix the 02x, maybe you could just snatch a faceplate for cheap from Banggood or elsewhere?
Anyone have issues with the DVR recording coming out at 4:3 when my cam and goggles are set to 16:9? Or is it because the camera can only record at 4:3?
Skyzone have been talking about some hardware limitation on the panels of the o30's so I wonder if that's somehow connected and the reason why the DVR would come out always as 4:3. Indeed, I never had anything but 4:3 DVR, not even on my Aomways, or my modded old VR007s. Google around a bit :)
how do you take the faceplate off? just want to make sure so i don’t break anything
never mind found out
Nice, glad you sorted it out. I was a bit scared when I was first removing it too, you definitely don't wanna snap the plastic, but it's more robust than what it looks like.
Hi do you think that old screens add a lot of visual comfort while flying analog?
Hmm, not really. What's you point?
@@FPVtips I meant OLED...
Are you reviewing the HD camera or the goggles? It seems like the the goggles are secondary on the screen.
Thanks for the feedback. I think it's a good point, definitely keeping in mind for future videos. Here the logic was that flight footage + dvr overlay is a bit less boring the me holding the goggles in front of the camera for 20 minutes, but I can easily see how that can be seen as a disconnect between what I talk about and what is seen on the screen. Thanks for taking the time to voice your thoughts :)
@@FPVtips the tempo of the video is great, your flying skills spot on. There are certainly more pros to your editing and production than cons. I am holding out for 16:9 OLED so if something else like these Goggles pop up I will watch it, they seem to be a winner... Thanx for your time and energy that you have invested in the hobby.
@@SPotter1973 Have you had a look at the Skyzone SKY03O? Might be right up your alley. Happy to help and will try to continue to improve the content which I cannot do without people like you, so thanks again :)
Hey, does 3s or 4s battery last a while in the googles or you have to change it often??
My 2 year old 3S 1300mah battery lasts about 4-5 sessions of about 30-45 minutes of having the goggles on.
@@FPVtips thankss
Whwre do you buy your batteries for the skyzone
I've used old quad batteries - a 1300mah 3S battery. So I guess anywhere you can get batteries in your country. I'm using Banggood usually as I don't care for the wait and the prices are pretty low for high quality batteries. There are a number of other sites you could check depending on your location. Let me know if you need more info :)
Does it come with that 90degree SMA adapter?
It doesn't but I love that thing and highly recommend it. I think it should be somewhere here on my gear list: blog.georgi-yanev.com/fpv/gear-2019/#goggles
The best thing about it is that you can leave it on your goggles, thus not stripping the goggle's SMA connector by constantly putting on and off the antenna.
My friend has those and wen I look threw them him as well it show double picture why is that
I would need more details to try and help you. Are you sure you're setup on the correct channel? How exactly is it "double" picture? Is the feed from the VTX stable or static-ey?
@@FPVtips thanks my friend i fixed them for him
Hello!
I would ask could you solve this problem?
I have the same, details on the osd not sharp voltage etc. While the picture what come from the camera is not the best but acceptable.
I don't know it is solveable or i should sell the google.
Thank you so much.