DJI Digital FPV system and Holybro Kopis2 HDV - Test flights and a motor desync 😅 /part 3/
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- 🚁 Holybro Kopis 2 HDV - bit.ly/holybro-kopis-2-hdv
🥽 DJI Digital FPV System - bit.ly/dji-digital-fpv
📝 Holybro Kopis 2 HDV Full Review and Setup - blog.georgi-yanev.com/fpv/hol...
📺 Full motor desync flight - • DJI digital FPV failsa...
In the third part of this mini series I finally go flying the Holybro Kopis2 HDV and try out the DJI digital FPV system for the first time!
We are going to go through different scenarios, starting from the stock settings and adjust things as they make sense. In the end we will even end with a motor desync on the coast line (luckily over land).
How does it feel to fly the DJI digital FPV system? I can try elaborate and share my experience in detail. What are the flight characteristics and how does the Holybro Kopis2 HDV handle? We are going to go over this as well.
📼 All the raw flight footage on my other channel Georgi FPV:
/ @georgifpv
📖 FPV drone reviews and setup guides - blog.georgi-yanev.com
🌍 Share your FPV spots and browse community spots at - www.fpvtips.com/fpv-map/
---
TABLE OF CONTENTS:
0:00 - Intro
2:17 - Hover test (and why you should do them)
5:52 - First DJI digital FPV flight ever
13:08 - Maiden second pack (4S, 25mW)
20:01 - Flight session 2 (6S, 25mW, windy, storm)
24:14 - Flight session 3 (6S, 700mW, sunny, higher pitched props)
26:52 - The last flight 😢 (6S, 700mW, sunny, coast line, motor desync)
29:07 - The desync and crash
29:24 - The aftermath: antennas ripped out MMCX connector
31:25 - Next up: Repairs!
---
💼 THE FPV GEAR I USE:
blog.georgi-yanev.com/fpv/gea...
• What's in my FPV drone...
👓 Goggles:
DJI digital FPV system - bit.ly/dji-digital-fpv
Skyzone SKY02X - bit.ly/skyzone-02x
📡 Radio transmitters:
DJI digital FPV system - bit.ly/dji-digital-fpv
Taranis X-Lite - bit.ly/taranis-xlite
Taranis Q X7 - bit.ly/taranis-qx7
🎒 Backpack:
Realacc Drone Backpack - bit.ly/realacc-backpack
🚁 THE QUADS I FLY:
iFlight Nazgul5 - bit.ly/iflight-nazgul5
Holybro Kopis2 HDV - bit.ly/holybro-kopis-2-hdv
GEPRC Skip 3 HD - bit.ly/geprc-skip3-hd
Mobula6 - bit.ly/mobula-6
Emax Tinyhawk Freestyle - bit.ly/tinyhawk-freestyle
GEPRC Phantom toothpick - bit.ly/geprc-phantom
GEPRC CinePro 4K - bit.ly/geprc-cinepro-4k
Emax Hawk 5 - bit.ly/emax-hawk-5
Eachine Wizard x220 (heavily modded) - bit.ly/eachine-wizardx220
Mobula7 HD - blog.georgi-yanev.com/fpv/mob...
Custom quad build - blog.georgi-yanev.com/fpv/bui...
---
🔝 Other Recommended FPV Gear
DJI digital FPV system - bit.ly/dji-digital-fpv
Fatshark HDO - bit.ly/fatshark-hdo
Fatshark Attitude v5 - bit.ly/fatshark-attitude-v5
Skyzone 02X - bit.ly/skyzone-02x
AOMWAY Commander - bit.ly/aomway-commander
Realacc Drone Backpack - bit.ly/realacc-backpack
Taranis Q X7 - bit.ly/taranis-qx7
Taranis X-Lite - bit.ly/taranis-xlite
---
🙏 SUPPORT THE CHANNEL
Subscribe on TH-cam 💙
Fpvtips - bit.ly/fpvtips
Georgi FPV - bit.ly/georgi-fpv
Patreon
/ fpvtips
PayPal
paypal.me/jumpalottahigh/5
---
SOCIAL MEDIA
Blog
blog.georgi-yanev.com
TikTok
/ fpvtips
Instagram
/ fpvtips
Twitter
/ jumpalottahigh
/ fpvtips
Discord
/ discord
---
Links to Banggood are affiliate links and would support the channel if used to make a purchase.
#djidigitalfpv #dji #holybro #kopis2hdv #fpvtips - วิทยาศาสตร์และเทคโนโลยี
TABLE OF CONTENTS:
0:00 - Intro
2:17 - Hover test (and why you should do them)
5:52 - First DJI digital FPV flight ever
13:08 - Maiden second pack (4S, 25mW)
20:01 - Flight session 2 (6S, 25mW, windy, storm)
24:14 - Flight session 3 (6S, 700mW, sunny, higher pitched props)
26:52 - The last flight 😢 (6S, 700mW, sunny, coast line, motor desync)
29:07 - The desync and crash
29:24 - The aftermath: antennas ripped out MMCX connector
31:25 - Next up: Repairs!
Great tip on hovering first. Noce flying. Yes the dji hd digital system does deliver a beautiful experience.. been flying it a few months now.. I'm in the states so I run on 700mw just because I can but dont need it.. ya I love to cruise and take in the scenery. When I found LED setting I was like wooooowwww. Led setting work good inside and outside . Happy flying look forward to next video experience.
Nice, matches my experience so closely :)
Hover test! Good tip thank you
Always 😅
Oh No ! glad you missed the water bud ! Great vids thanks :D
You and I both haha, thanks!
i just got mine also time to switch got a bnf dji and built my own 5 inch dji quad using a source one frame v2.
Congratulations! Enjoy it :) I'm definitely a fan!
Can you do a next video on attaching a go pro or action camera please??
Absolutely. Unfortunately, the next video in this series is likely to come out at some point in April the earliest, due to winter arriving in Finland soon as well as some other factors.
did you get in touch with holybro about the desync to see if it was caused by the faulty esc? i had a badly printed camera mount on my kopis and they shipped out a replacement straight away, the store i bought my kopis 2 hdv from said they had received the replacement esc's but i chose a refund and im planning using my kopis 2 hdv frame i bought with the new t-motor f7 hd stack
Not yet, but I will shoot them an email later today! On the other hand I got the MMCX connectors now, so will be fixing the air unit next so I can hopefully test this further.
I lost my first drone.. due to the mmcx antenna connections was not plugged into air unit completely .. expensive lesson learned.. it was my first DJI HD kwad and air unit from a geprc rocket plus. Company did not instal antenna correctly.. being a newb I over looked it. Know I know.
This is the only thing I'm wondering about, if during my final flip the antennas came out and that's what caused (in that hypothetical case) the desync. But I really am pretty sure I plugged them in fairly properly.
@@FPVtips ya anything is possible. Knowing what I know now.. I definitely did not have mine pushed and snapped into the air unit.. when you crashed there was so much pressure on the antenna from the way it was mounted think that's what snapped the one side and other side luckily just popped out.
How can I fix my air unit position so that I will not able to see the propellers in fpv googles view
You probably mean the camera's position? I would say that would depend on the frame you're using. It may or may not be possible. Alternatively you could crop video in post. But really, for best results, you're probably better off using the footage of a go pro mounted on top, positioned in such a way so the props are out of view. Just my opinion. There might be even better ways of handling it?
link for the ratchet?
BTW great videos bro
Thanks :)