Also road contamination, just after the city repaved the local streets, I started getting Squealing almost always, took apart and found tar contamination on my rotors and Pads, resurfaced rotors and cleaned pads... No more noise!
I am enjoying your channel. I bought a 2012 F-150 Lariat 5.0 in 2019. In 2020, I took it to Brake Check to have the rotors resurfaced and new brake pads put on. I don’t drive much or far, but I do live in Houston, Texas, and it’s hot. Recently, I noticed when I am backing up and my foot is on the brake, I hear a squeaking noise, especially in the morning. What can I do to get rid of the noise? I am not a fan of Brake Check.
I just wanted to see if anyone has heard of this... Jaguar back brakes squeak in reverse but stop if you add isopropyl alcohol to the gas tank. It sounds weird, but it works, and I don't know how.
Nice video man. So check this out, I had brand new rotors and semi metallic pads, there was so much squeaking noise, so I replaced the pads with ceramic. The squeaking noises didn’t go away. Well, I got new rotors and use the ceramic pads, same crap- the squeaking noise is there but little less. What do you advised ??? I replaced two complete sets This is too much. I have a 2015 optima sxl turbo. Let me know please. Thanks
Frustrating no doubt ~ make absolutely certain there isn’t an issue with brake pad mounting hardware ~ that all is seated properly ~ call us at the garage if we can help further ~ try and walk you through over the phone. Good luck here !
I just replaced my brake pads and rotors and now I have a sqweek what can I do the car is stoping just fine the sqweek is there when the brakes are not even being applied
Jay Merlone ~ recheck all hardware and also make sure backing plate is not rubbing on the rotor~ hard to say without looking at it ~ hope this helps ! Send me video of setup over at @urmechanic Instagram
Thank you for your video. My brakes on my 2002 Cadillac deville just started squeaking and my 2011 ford escape needs rotors and just started making a grinding noise plus the actuator in the throttle body is stocking open, then sticking closed. That has made my little wrench light on the dash come on then it died driving down the street! Which one should I get fixed first? The ford? Please help. I'm a single woman and don't know that much but I do my best to research the problem before I take it for repairs. Thanks again for your video.
Depending on your current financial situation - it sounds like the Cadillac may be your best bet . Don’t stress and go with what works best for you - good luck - always at the garage if your not sure - call us anytime
I have a break squeek at low speeds coming to a stop, but not on high speed slow downs on the highway. The rotors and pads have a lot of meat and potatoes left on them. They were working good till I took the car in to the dealership for a hood latch sensor and after leaving the dealership service department the break problem started. Any ideas?
My latest model (2017) Volvo xc90 has suddenly started making a grinding noise every time I press the brakes (right front wheel). It was fine couple of days ago. It went to the wash yesterday, since then I started noticing the noise. Not sure if it is wet brake or something else?
kingchrisp198432 it’s a combination of metal and ceramic. The ceramic is best for heat and metal is best for stopping power. With semi you have a combination of both. But might have some noise vs the pure ceramic.
Take a close peak at all brake hardware - make sure all is well & nothing out of place Let me know how it goes - will look for your reply if that doesn’t seem to help . Good luck ! Rock the weekend
my front right brake is making a loud asss squeal. only when hot, no pulse in pedal, thick pads. and only with a certain light amount of brake force. harder force makes it go away, sometimes you'll head the squeak pulse
Question ❓ my car has good pads and rotors not going bad but I'm hearing a high pitched squeak when I press the brakes what can that be Just brake dust or something else?
mike smith ~ right on thank you ~ come join our tribe & check out our car Talk show bit.ly/WrenchNation . Here is a sample streaming bit.ly/2koWTGf ~ enjoy ! ~Frank
Hey frank, thanks for the video...replaced all my rotors and pads on my first brake job, i used all new pad hardware and am running wagner ceramic pads, i did buy the platinum carquest rotors from a national chain store...i put anti seize on the back of the shims and for some reason i get a squeal around 25 mph during regular breaking pressure, should i try a anti squeal product other then the silver anti seize? Thanks for the response
hey frank, so is it possible that my brakes would squeak like shortly after i got new pads? was it because i ended up getting the cheap ones lol. I like your videos!
I got a question for you....i already changed my rotors and pads and my 06 f-150 still make a really bad noise sounfs like a train brakes....what coul be?
Duuudddeee. My brake pads are fine yet theyre squeaking extremely bad man. Its so fucking annoying and I get eyed and mean look 😂😂 how do I get rid of the squeak man. Help me out. Could it be rust?? Or dust? How and what should I use for that. I've never changed brake pads myself cus of not having the right tools.
@@wrenchnation So I have a 2015 Toyota tundra four-wheel-drive I had new brakes and rotors installed on the front of my tundra and ever since I’ve done that the squeak at slow speed can you help me
You should have more subscribers man. Great job.
As long as we can help a few people ~ we are golden . Appreciate the comment 👊🔧
728 subscribers?! Surely it's missing a few 0s on there. Great video and great presentation. Thanks for the info!
This guy is a good salesman, I'm gonna go buy brakes, and I don't even need them.
Tommy wants wing-ies!
😂😂😂
Thank you so much this really help me a lot appreciate it
Make sure to subscribe to our weekly car show -www.wrenchnation.tv/ --thanks and glad this could help !
1:08 brake squeal has nothing to do with the edge of the pads. Cheap pads have cheap shims. They will flatten out and the pads will squeal.
Also road contamination, just after the city repaved the local streets, I started getting
Squealing almost always, took apart and found tar contamination on my rotors and
Pads, resurfaced rotors and cleaned pads... No more noise!
I am enjoying your channel. I bought a 2012 F-150 Lariat 5.0 in 2019. In 2020, I took it to Brake Check to have the rotors resurfaced and new brake pads put on. I don’t drive much or far, but I do live in Houston, Texas, and it’s hot.
Recently, I noticed when I am backing up and my foot is on the brake, I hear a squeaking noise, especially in the morning. What can I do to get rid of the noise? I am not a fan of Brake Check.
I just wanted to see if anyone has heard of this... Jaguar back brakes squeak in reverse but stop if you add isopropyl alcohol to the gas tank. It sounds weird, but it works, and I don't know how.
Sounds like ur fuel pump
Did you say Beveled edge? Here in the UK, we call it chamfer. Or chamfering.
Excellent point !
Nice video man. So check this out, I had brand new rotors and semi metallic pads, there was so much squeaking noise, so I replaced the pads with ceramic. The squeaking noises didn’t go away. Well, I got new rotors and use the ceramic pads, same crap- the squeaking noise is there but little less. What do you advised ??? I replaced two complete sets This is too much. I have a 2015 optima sxl turbo. Let me know please. Thanks
Frustrating no doubt ~ make absolutely certain there isn’t an issue with brake pad mounting hardware ~ that all is seated properly ~ call us at the garage if we can help further ~ try and walk you through over the phone. Good luck here !
@@wrenchnation Will check. Thanks much.
I just subscribed, thanks for the info
Thanks Michael! Make sure to check out our weekly show 👉bit.ly/WrenchNation
I just replaced my brake pads and rotors and now I have a sqweek what can I do the car is stoping just fine the sqweek is there when the brakes are not even being applied
Jay Merlone ~ recheck all hardware and also make sure backing plate is not rubbing on the rotor~ hard to say without looking at it ~ hope this helps ! Send me video of setup over at @urmechanic Instagram
Thank you for your video. My brakes on my 2002 Cadillac deville just started squeaking and my 2011 ford escape needs rotors and just started making a grinding noise plus the actuator in the throttle body is stocking open, then sticking closed. That has made my little wrench light on the dash come on then it died driving down the street!
Which one should I get fixed first? The ford? Please help. I'm a single woman and don't know that much but I do my best to research the problem before I take it for repairs. Thanks again for your video.
Depending on your current financial situation - it sounds like the Cadillac may be your best bet . Don’t stress and go with what works best for you - good luck - always at the garage if your not sure - call us anytime
I never had an initial reverse squeel until I used centric premium rotors.
Interesting. Did you change brands to eliminate squeal in reverse ?
I have a break squeek at low speeds coming to a stop, but not on high speed slow downs on the highway. The rotors and pads have a lot of meat and potatoes left on them. They were working good till I took the car in to the dealership for a hood latch sensor and after leaving the dealership service department the break problem started. Any ideas?
My latest model (2017) Volvo xc90 has suddenly started making a grinding noise every time I press the brakes (right front wheel). It was fine couple of days ago. It went to the wash yesterday, since then I started noticing the noise. Not sure if it is wet brake or something else?
Great video, thanks!
I have a 2010 Toyota Corolla Le the back brake is a drum set every time I pay someone to do it always squeaking
I thought semi metallic works best with heat, that semi metallic has the best stopping power??
kingchrisp198432 it’s a combination of metal and ceramic. The ceramic is best for heat and metal is best for stopping power. With semi you have a combination of both. But might have some noise vs the pure ceramic.
Hey Frank, why does it sound like my brakes are squealing when I accelerate?
Take a close peak at all brake hardware - make sure all is well & nothing out of place
Let me know how it goes - will look for your reply if that doesn’t seem to help . Good luck ! Rock the weekend
my front right brake is making a loud asss squeal. only when hot, no pulse in pedal, thick pads. and only with a certain light amount of brake force. harder force makes it go away, sometimes you'll head the squeak pulse
Perhaps fighting some brake dust ~ clean wheels ( when cold and not after running vehicle) ~ see if that helps
@@wrenchnation so just pressure wash on brakes?
I would start there ~ clean wheels and if that remedies ~ brake dusting more than likely the cause ~ otherwise double check pad mounting hardware
Did that few times while washing car
Did you recently replace brake pads and rotors ?
Question ❓ my car has good pads and rotors not going bad but I'm hearing a high pitched squeak when I press the brakes what can that be Just brake dust or something else?
Brake dusting can certainly create annoying squeaks ~ clean wheels to help isolate noise if you can ~ good luck !
Thanks, I just did that and noise is gone
New subscriber here thank you for the content 👍🏻
mike smith ~ right on thank you ~ come join our tribe & check out our car Talk show bit.ly/WrenchNation . Here is a sample streaming bit.ly/2koWTGf ~ enjoy ! ~Frank
Before I changed my brakes, they squeak, then i changed them, but still squeak. Any advice? I drive a lexus HS250H.
Same here, Just did mine a a minute ago, came here looking for answers, The squeak is the same as with the old.
@@rickjeffery4110 I think i need to bleed my breaks, but not sure yet.
See hand brakes pad area please
Hey frank, thanks for the video...replaced all my rotors and pads on my first brake job, i used all new pad hardware and am running wagner ceramic pads, i did buy the platinum carquest rotors from a national chain store...i put anti seize on the back of the shims and for some reason i get a squeal around 25 mph during regular breaking pressure, should i try a anti squeal product other then the silver anti seize? Thanks for the response
My Vito was making continue sqweek noise problem was hand brakes pad spring was broken from both side spend lot of money to find the fault
Sorry to hear ~ can be frustrating.
hey frank, so is it possible that my brakes would squeak like shortly after i got new pads? was it because i ended up getting the cheap ones lol. I like your videos!
Rudy--as long as the rotors were resurfaced properly --could be a pad quality issue or hardware concern ---thanks for stopping by !
I got a question for you....i already changed my rotors and pads and my 06 f-150 still make a really bad noise sounfs like a train brakes....what coul be?
What if it’s make noise while holding the brakes down at a complete stop?
Duuudddeee. My brake pads are fine yet theyre squeaking extremely bad man. Its so fucking annoying and I get eyed and mean look 😂😂 how do I get rid of the squeak man. Help me out. Could it be rust?? Or dust? How and what should I use for that. I've never changed brake pads myself cus of not having the right tools.
Thanks
Awesome 👌
Thank you!!
Oh and I subscribed
Thanks...well said
I can't believe it! You quit two and a half men to become Machanic.
Hahahaa
Mine only Squeek when I’m backing up
This didn't solve anything. You should change the title of the video. Thumbs down
Respect that. Will work to provide more details as we grow here.
@@wrenchnation So I have a 2015 Toyota tundra four-wheel-drive I had new brakes and rotors installed on the front of my tundra and ever since I’ve done that the squeak at slow speed can you help me