Part I - How To Car Alarm Remote Start System Installation
ฝัง
- เผยแพร่เมื่อ 24 ต.ค. 2011
- This is the first and most important single section of our 5 part install video series on installing a remote start with security system.
Part I - Car Alarm Remote Start System Installation
To access the complimentary remote start wiring info, (text style text sheets) All you have to do is login to www.wiringinstructions.com and once you're there, enter password (ask us) to access the full site.
Then enter your year, make and model and print off any and all the information you would like, and feel free to use it more than once if you need. ***ADDENDUM NOTE: There is also another free site called bulldogsecurity.com which we suggest as well, That one in some cases offers photos on installations as well. Thanks again for the order and if you need any other parts or asistance email us via youtube messages.
If you would like to see our HOW TO install videos go to / thelessco
If you're happy with this free service we provide or our services in general PLEASE let it show by subscribing us.
How to install a car alarm and remote start - ยานยนต์และพาหนะ
Awesome video, nice idea on drill-twisting the wires. I won't attempt this myself but I hope whoever that installs mine will be as thoughtful. Thanks for the video
Nice to see a proper video, for your time I will order from you next time, happy new year.
Thank u in these hard times you saved me needed money, thank you very much sir.
Very nice, I too twist all my wires. Makes it a lot easier to find them when you do the actual install.
Idk if this is the Right way , but man this is the best video about install here on youtube , thanks for the help
you are a master of your craft sir ,well done.... very helpfull
thank you very much for this tutorial, it helped me out sooooo much and saved me $100+, it was very informative, please keep up the great work!
I just watched your video I've been always wanted to know how to do a remote start system and thank you for the post
anytime
JUST SO AWEEEEEEEEESOME!... as you said "people supposed to do this" and they do a nasty work... Congratulations this is the thing that I was looking!
great teacher man thanks alot
great video best ive seen so far.
Thank you, very detailed install as well, not some 15 minute video showing me a jumbled mass of wires.
BY THE WAY THE VIDEO IS AWESOME AND IT HELPS ALL THE DIY'S OUTTHER.
Ur video was very helpful thank you for putting out ur video
A ram is like a 7 out of 10 on the difficulty level, mostly cause they use resistor based lights and door locks, but the cheat sheets explain all that, and so do my other videos as well. the tester I use is a snap on power probe btw
the workman ship looks great . I am trying to learn my self how to install alarms.
I know the basic but I want to learn it like the pros. .
yes, the bypass is for the transponder chip key, so that sounds right, as for the relay he's probably right again, youd need one for illuminated entry, starter kill and / or trunk pop
Boy that's helpful you got some good 👍
Great job
اهلا انا عبد الله من الجزائر
انا مسرور بهذه القناة
و استفدت منها كثيرا ...... شكرا جزيلا
Instead of opening and closing your drill every time you want to twist wires, i would suggest that you put an eye hook or eye bolt in the drill and then just put about 2 inches of wire through the eye and hold it and spin it.
i wanna get into var alarm install
ation and i found your videos and wanna thank you for the info. very helpfull! soon i will be doing my own car and might have a few questions, i hope not lol
Here is where the free wiring info is now: th-cam.com/video/cqk08zGg0Ls/w-d-xo.html
You do that by tying into the factory arm/disarm wires coming out of the driver door typically. Sometimes its done through the door locks (depens on the car)
good info, by the way.
Awesome video! You have a new Sub
I can't believe I've never thought of using the drill twist up the wires like that!
you always need to add a relay to add trunk pop. wire it for a negative output:
TRUNK RELEASE GRAY(-) USA/CAN, PURPLE (-) JAPAN @ DRIVERS KICK, PIN 20 IN WHITE 22-PIN PLUG
Cool thanks
Thank you
Good Job
Thats a good alarm, the car is pretty easy too, the only thing with that car is you have to program double pulse unlock (if you want all the doors to lok simultanously) you can leave it as is and hit the remote 2x to make it a 2 step system though too, which is cool.
Thanks
good video
Awesome Video thanks for the help waiting for a access code for your site
NicE tutorial,, bRo
Look at the excalibur al1850edpb and the fortin evo can. thats a great system and a fair price too
Awesome series! Is it hard to the add diodes for an additional shock sensor?
you tube is the best videos
I have never seen wires twisted like that in a car. Great idea.
This good
Easy, Go under the driver dash, You may have to take some stuff apart, Look for the main alarm module-You cant miss it its a black box with a jillion wires coming out of it. The blue 2 pin plug is the valet switch, Follow that to the end, there my friend is your switch.
Yeah, I've already seen that one and many others. Feel pretty confident at this point with the install, except its still bothering me that I don't know exactly what it means that some connections are listed as negative and some positive.
Could u make a review on the 350 viper responder a full review from the optional starter to the shock sensor thanks man
Great video. Question: Is it possible to install a remote start on an old truck? I have a 93 Ford Ranger. If so can you recommend one please
Hey Buddy. First of all thanks for this videos series! I have watched it all a few times now, just to properly get a grasp of things.
I am about to buy a Code Alarm ca6552 2-way with alarm/start. What are our thoughts on that?
I will be installing that in a 99 Maxima (manual), no immobilizer. Have you done this car before, anything I should know?
Thanks for all of your help!
Ken
Hey buddy can u give me any advice or tips on installing a prestige remote start alarm on a 1999 chevy 2500 this is my first time installing a alarm and I have been doing a lot of research on wiring diagrams I just want to do this right
Are you working on a manual trans car by chance? Cause if you are those need to have the wire ran into the engine compartment due to the cluch keeping the circuit open
U R tha Man!! Ur Help iz much appreciated. $aved Money, & Learned $ome New Trick$.
cut the wires to length and put them in split loom when your done, very clean, and no risk
In the video is the insulation stripped away or just poked a hole through with cotter pin extractor .before adding new wire .Thanks . Plan on installing mine soon and want the easiest way possible . Nice video .
how do i get the cheat sheet for the wiring??
Hey great video series its helping me alot. Got a question on my hand book for my remote start were it shows how to wire the relay for the starter disable well on one part its say "make certain to connect brown wire to starter motor side." by it does it mean to connect that wire direct to the starter? If you could help me out so that I don't mess up when I install this in my car on the weekend. Thanks
Couple of questions. I bought an xpresskit bypass and a crimestopper rs4-g4. Certain wires of both have to be hooked to the same wires, is it okay to hook them up on the same location of the wire? Meaning, a wire from the remote starter and the bypass and basically touching each other and going to the same wire, or should I cut another piece of the wire and hook them in individual spots? Also, the wire from the bypass to the remote starter is one color, while the wire from the remote starter that's suppose to go to the bypass is another color, is this just common due to different manufacturers? I.e, they don't do the same colors for the wires?
I really enjoyed your videos. I have a 1998 Dodge Ram 1500 5.2L I have purchased a Viper 5706V what type of relays do I need to complete the whole install. Thank you for your help.
Hi mate from Australia, i luv all ur video and they are great. Keep up with the good work.
Just a quick question, what happen if I can't find the car that I want to hook up an alarm system onto from wiringinstructions-com
I cant some of the Australian made vehicles such as 2002 Suzuki Ignis, Ford Flacon, AND Holden Commdore.
thanks
Also Mr. Lessco, (thanks for your patience) How do I check an activation circuit, i.e. dome light, horn honk, etc, with my multi-meter to see if its a positive or negative circuit?
Hello, your videos are very helpful. I’m having issues with my viper 4806v . I’m not sure what wires I need for the remote start to work? I’m installing the remote start in a 1990 Chevrolet Silverado . Can you help me ? Can you do a video or help me with a diagram? I installed the relays for the keyless entry and it works . I installed the starter wires that I thought would be the correct ones but it does not work. There’s also a fuse inside the viper alarm that don’t know which side to plug it in (positive or negative) thank you very much for your videos and your help.
Hello, thanks for this Prep video! I own 2003 Isuzu rodeo 4wd 3.2l and am installing Excallibur 1850. I have been following your prep but since you were installing on Toyotal am not sure if wire twisting is the same on the 16 pin harness (see video #2). Please I need your help from prep to the install. I have all necessary things available for this. Thanks
Thank you for doing this! I have a 2003 F150 supercrew I would like to install an alarm and remote start. What do you recommend for it that is a good reliable system and what else will I need in terms of a bypass. Thank you hope to hear from you!
Just had my car broken into and will be attempting a security/remote start install. Car is a '93 Lexus GS300. Looked at the diagrams and light research. Anything particularly hard about this type of install? Thank you for a great video set as well.
awesome vid thanks alot, one dumb stupid question, if my car says its a negative door trigger, do i use the negative door trigger wire from the alarm system or positive? im just a lil stuck on that.
Do you need a relay for the power door lock, trunk unlock, starter kill and horn? or can you use the same one for all of the above. As well, can you use the output for the siren to the horns instead. Thanks
Very easy-to-follow instructions, but the older gentleman that does videos about cars made a very good point. His name is Scotty and he said that my 2007 Volvo XC90 may already have a factory installed alarm. He also stated in his video that no one should ever put an after-market alarm on their vehicle. Now the reason I want a remote start is, that I want to warm up my vehicle before I get into it in the winter. I'm curious what would be your input on the matter.
Why?
hey mate, loved your videos.
I've just purchased a Viper 5706 system but i can't find any wiring sheets as i am in Australia.
my car is a 2012 Toyota Hilux SR5
Do you think you can help me??
Cheers.
Ur videos are awesome. Anyways got a prob of course n need help. hooked up a few units but still not a pro! Got a 2000 Infinti i30 and hooking up Prestige APS57c remote start -no alarm unit with FLTB1 transponder bypass through DBI data port. Got everything in, by the way had to rip out vintage autopage alarm (RF 315) w/ shock sensor before the install. Hooked everything up and didn't work, realized I had a few errors. a little confussion w/ parking light wires: this unit has 2 wires and no +/- switch on brain. manual says hook one (no matter which) to either 12+/ ground ad other to parking light circuit. chart says access at kick panel for P. light is + and access at column switch is -. Don't know if I did it wrong, but I tied into column switch (-) and then tied other white P. light wire to +12v (ign +12v). Wow, hope I didn't fry it if this is wrong. Also to keep battery from dying I removed fuse for door light however this fuse also kills ability to use power locks. I had to hook up relay for trunk. Bypass is correctly programmed. no response what so ever from unit other then three, double blinks of the antenna's LED. Tach is tied in, both starters, boths acc, one ign, and both constant +12v combined into the one +12v the Infiniti has. smelled slight buring, but unsure. opened brain, no evidence on motherboard? what am doing wrong. Please help me out.
can you recommend a remote starter for a 2013 Mazda 2? I would like to install myself.
hi there !
Like your Video and i m going to install viper car alarm security in 99 camry any tips ? do i need any relay for dome-light supervision ?
Okay, Mr. Lessco, purchased a viper 4103 keyless entry/remote start and would like to install it myself.My question is why is there a (-) beside some of the circuits and a (+) beside the others on the included wire identification sheet?
I plan on installing a Viper 5704V with an iDatalink ADSALCA into a 2006 Honda Odyssey. I have two questions I would like your help with. Will I need any relays for this install? I would like to use the feature that normally controls the trunk release to control the sliding doors...how would I accomplish that? Thank you in advance.
Hey I have a question I have a avital 5303l installed and it's not up to par for me. I had it installed by a stereo place and I was wondering if I could buy a new viper alarm and jus pull the brain out and replace it will all the harness plugs and sensors fit in to the viper brain??
Great video. Was wondering what website I can get that cheat sheet from?
My wife just bought me the viper 5305v and I don't see a starter kill relay do I need to add my own or is it internal? If u could help me out I would appreciate it... Btw I love your vids u think it's very helpful keep up d good work!
watch this to get all the info you want: th-cam.com/video/cqk08zGg0Ls/w-d-xo.html
hi, is it possibe to use the airco accessoires function, horn output & trunk release function ? because the 1860 series only has 2 on-board assignable relays ?, if not, will it be possible to add relays to the sytem on your own ?
Thnx in advance.
P.s. i am considering to purchase this alarm for my Alfa Romeo 156 ( manual transmission)
Just a key bypass, like the fortin key override all
I have an 05 chevy equinox, and I am having issues with programming the key to the bypass module. I followed the flash logic instructions. I have the metal key by the way. Can't make it work. What do I need to do?
I'm using Flcan and a prestige remote start. Thanks.
Hey do you connect the smaller wires the same way as the thicker wire?
Thank you for taking the time to make these videos, they've really helped me to get my install prep of the Excalibur 1660 easier. I'm installing on a 2011 Tundra Crewmax and wanted to know if I need any additional modules or anything to use the remote start?
+Carlos Orellana get a transponder key bypass, either the ol-blade or a fortin evo-all
+Lessco Electronics
Thank you for the advice!
I followed as much as I could from this video to prep my wires but sometimes you can't don't clearly say what lines you're cutting on the 18 pin. Do you by any chance have a wiring diagram for dummies that clarifies everything. I've almost got it all prepped just missing the horn and lights. My email is el5626@yahoo.com
Thank you!
I dont really have that but you can always call us. 904 342 5491
How can I get some wiring info for a 2000 jeep cherokee sport?, it is the standard so, also im looking to see how to do the factory disarm connection, not sure if the arm is a function on this model.
Thank you
Did you used to work for Kustom Kar Sound in Mesa Arizona?
Can you please walk through installing a remote start alarm system on a 2005 Ford F150 Lariat with a chipped ignition key that requires a Bypass module for the remote start, how to video would be great. Or just how to install the bypass module for the chipped key? Thank You From South Texas.
if you need just the alarm portion and not the remote start, do you need the immobilizer?
One more question, sorry. Do you believe in splicing for installing a remote starter or no?
so if your vehicle has negative door triggers you dont need the positive door trigger wire from the alarm?
Can u explain how to integrate aftermarket with factory alarm? Is it as easy as wire to wire plus the extras?
Oh and my alarm system is a Crime Stopper SP-501 in case you want to look up the manual so you can see what im talking about. Thanks
do i need to bypass anything if i just want to utilize the remote start function only? I've wired the 6-pin harness in but the programming indicator light doesn't come on
Yes, We sell all the brands at lesscosales dotcom
Thanks for the video, last 2 weeks someone try to steal my car and he fell asleep trying to. Need help getting a wiring sheet for 2000 Toyota Corolla.
Great video. I am new to alarms so im not too familiar with how what goes but watching you video I got an idea. Only qurstion is I see I have one set of wires for one actuator how or what do I wire the second one. Also I dont want it to were I click it once both door unlock I would like the one for one and 2 for both.
watch my video on adding adding actuators and/or the 5 wire relay wiring I have posted.
good video, used your steps, i just have a question, i have a 1995 chevy blazer v6 4.3
on the instuctions of the manual my violet wire which is the starter output, it says the wire will have +12 volts when the key switch is turned to the start position only, on the manual to my blazer the starter wire is yellow, long story short, i believe its the right wire but there is no +12 volts on the meter when in the start position, please help me, im fed up, am i missing something that im not seeing ?
yeah i later realized that thanks. I also installed motors (Xpress P3500 2-wire actuator) so the alarm could pop the locks, but it doesn't send enough power to the motors. Any idea how to fix that problem? Every thing else about the alarm works great.
Hey, Im going to be installling a viper autostart on my 2002 astro cargo van. Will i need to buy the thing for an immobilizer? i didnt think i needed it but the guy at the store told me i did...
HI Lessco. Where might one find 1700 electrical tape OTHER than online?? I have checked the big box stores and they don't have it - only 700, NOT 1700. Thanks
I'm installing a Avital 4130 into a 2009 Ford Taurus and was wondering if I will need a bypass kit?
Could you tell me how I could program the keyless remote for a 2008 toyota tundra
you should do a video with all the new push to start kits out there . a video with a push to start system with alarm .. hey maybe even with the new viper pke hint hint
Hi i have a viper 5305v and i need to put on my 17 wrx. Do i need any module to have a remote start to work thanks
Hi sir got questions for you I got 06 Honda Ridgeline I have remote starter on my key ignition key when out so is been replace with new ones but the mechanic cut the wire of but did not put it back on my ignition wire key ignition now the remote starter wire is just laying in the steering column not in use my question is can I wire them back without programming to truck again thanks