ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to pair & Program VIPER 2-Way Pager remote control (7345V) [HD]
ฝัง
- เผยแพร่เมื่อ 14 ก.พ. 2014
- Check out the latest version of the Viper responded: amzn.to/2amLj3C
To download the manual please first subscribe to my channel for future updates , than visit the following link hosted by Halcyon Technologies, Inc - Security Cameras to have the manual:
www.halcyoncctv...
comment if you have any questions.
In this video guide i will show you step by step how to pair a 2-way LCD pager (7345V or 7341V) remote control with 3305V or R350 Viper car alarm system.
* Comment you like to get a copy of the full installation manual for the R350 alarm system
Tom U Rock! I don't feel very smart when it comes to things like this but you made it very easy to understand. Thank you so much! My old remote just fell apart!
You saved me a trip to the audio place that installed my alarm. Didn’t realize I must have hit the program button. I set it back to the #1 setting. All good now. It was moved to 4
Same thing for me I was trippin
Thank you for your comment! This just happened to me, like 30 seconds ago and YOUR comment saved me a trip to the audio place! ❤
I was trying to program a 479V remote to my 791XV system and was having difficulty until I found this video. Thanks a lot!
The IMPORTANT thing to note is that on the 8th press of the Valet button, DONT release it! Let the LED flash 7 times - then hit LOCK on the remote - THEN release the Valet button!
Thank you for this video. I have the 350 security and noticed instead of pressing 7 times to get the 7 blinks, i had to press it 8 times in order to get the 7 blinks. Tried it few times to confirm it but it works now. Thank again.
Thank you so much this worked.
I have a viper model alarm r350
my old remote was so old the buttons didn’t press and work. it was a 7341 v/p/x got a 7345v for the pager function. put key to on, press valet button 8 taps and held on 8, press and hold lock button on remote, some beeps let go of valet button and turn key to off. worked! thanks
Thank you for the video. I lost my extra remote will be ordering another. Thank you again for simple and clear instructions on how to program the remote.
Where did you order your replacement remote?
@@redgieburks2070 I found someone on ebay a sound system store selling a refurbished alarm system like mines so I brought the whole unit again for cheap due to my control module going bad on my system. Killed 2 birds with 1 stone.
You need
- Key
- Remote Entry Fog
- Access to the Transmitter Control Button on the overhead control centre.
To Program the Fob
- Open the driver door
(NB: I had my cabin light switched off to avoid accidentally leaving it on. BUT ... the only way the alarm knows if the door is open is by the interior light coming on. So, you need to have the interior light set to 'on' when the door opens. Otherwise the programming does not work.)
- Turn the key n the ignition to the 'One' position
- Press the overhead transmitter control button 7 times THEN PRESS AND HOLD ON THE 8th PRESS
(At this point the alarm will chirp)
- Whilst still pressing the transmitter button press the REMOTE KEY FOB LOCK BUTTON
(At this point the alarm will sound, briefly)
- Turn the ignition key off
- Close door
- Test Key Fob programming has worked by arming and disarming the vehicle with the fob.
I will try this tomorrow. My lcd transmitter died and it had been warning me but now won’t control the alarm. Just the 1 way works. Thanks !
How do I reprogram my trunk back to the AUX button? It was there but now the aux button doesn't do anything on any of my fobs.
Mine doesn't acknowledge the 8 buttons it just keeps blinking with the blue armed light. I can lock and unlock my door but it wont even try to start
The alarm never chirps
Can you tell me how to use the remote starter on the Viper remote you used in this video
Thanks for info., very helpful. That same procedure worked on my Clifford 3305X and Matrix1 for the 2-Way and the 1-Way remotes with one caveat; I had to press valet button 8 times to get the 7 blinks on the LED before pressing the lock button on remotes..
You saved me bro. I too have the 3305x and had to push valet 8 times
this just saved me 20 bucks. and an unnecessary trip to get it programmed... THANKS
+Carlitos jr You welcome, saved my self almost $80! haha :)
i got an extra one when i bought my car and a guy at my local best buy did it for free
Recently bought a car with this system, previous owner said that it stopped locking and unlocking doors. Still works but I have to lock the doors manually and then I can arm the alarm. Any suggestions please, maybe I need to reprogram?
I have the same remote system, and the led light keeps blinking on and off while it's locked, does this mean it's armed? And will this drain the battery constantly blinking?
I’ve got a viper alarm & blue led is staying on & I don’t have key fob . What’s my opinions ?
You stated the button is right hear and the LED is right here , what is the first button you are referring too ?
Thank you for this video.
Push it 8 times for 7 blinks, press and hold the lock button, then press the valets 8 times again then release the lock button and that is how it basically worked for me. Door locks as well
Thank you so much 4 posting this i just got my old Viper Alarm on my Chevy Tahoe back up & going 👍👍
I have a question. I can remotely start my car , I can lock and unlock my car no problems. But when I lock my car my remote beeps but sometimes my horn does sound. I've check all my fuses and there's power going to my horn. Also when I don't get the horn sound when I lock or unlock my car my horn itself does work. Any clues why this happens..
Do I need to reprogram my key if I have to change the battery on my key?
wasnt what i needed but helped out !!! thanls
Thank you. This helped me find that I had a valet button they never told me about. I was able to program my remote to work with the alarm.. :)
Hi what happen after you pair it, but still not responding to the remote, do you have any Idea what cause it not respond. I got a new remote pair but still not working. Bought a new responder, but still not working.
Do you need the car key to put it on the on position???
On my system the little bar at the bottom of the remote has 5 black bars halfway in it. Is that a cause for concern?
Hello there i have Viper 5301 in honda 2002 its working very good but i lost my 1st remote i have 2nd one can you help me out how can i programming other 2nd remote Thank
I bought a used FJ cruiser without FOB W
will that remote work if I dont have code
I want to adjust my sensitivity of the alarm... if I hit the vehicle the alarm does not trigger
What if you have a remote starter with alarm? What number to use 4 or 8?
10-yrs later, this came in handy...
Hey, thank you your video is very helpful can I get a copy of the programming manual, please.
i have 3 squiggles lines on my remote what are they what do they mean? its by or near my tire on the driver side?
Thanks ! Got all remotes re programmed , great instructions .
Can that be used to reset the remote
Just fyi, hes pressing a lil toggle button, i was looking for it on the transmitter itself, other videos show it on the antenna... i couldnt tell what he was showing at 1st
i tried it and it does not arm or disarm but when i use the old remote the arm and disarm symbol does change on the new remote
Hi can u send me the manual when unlock car beeps to loud in morning
in the second 59 there is a small button in the lower right, what is that button for?
Do you happen to know how to pair a 7652 v
Such a soothing voice. Almost put my ass to sleep lol
Thanks so much you saved me fifty bucks
What does the transmitter look like does it have a blue button?
Why remote start isn't working?
I have remote start in my truck, used to work with the factory system, but now isn't. I reprogrammed the remote multiple times and still not working. Alarm goes off when I hit the button.
So with the door open you turn the ignition on, press the ballet bottom 7 times and hold it until you hear a beep? I have a viper 5900, I wonder if it works the same.
HI, please could you help me with setting up the viper with my pontiac GXP 2006? Thanks
I bought the 7345v to replace the one I have now. I pressed the valet 7x's. It did not beep 7 times but the light blinked 7 times. then I pressed the top left. Nothing happened except the bottom horizontal bar went to full. No beep. Nothing, Took finger off valet button and remote beeped 3 times. I am guessing that is an error beep. Not sure why it's not working. I seem to be doing exactly like the video. Do I have to unpair the old one? My guess is no? There can be more than one paired at a time? Thnx
Hi do you think this method will work with newer style remotes I have the 7345L but want to pair a different remote thank you !
Does it light up?
Will this work on the non-lcd keyfob the same way? Like, the one that comes with the alarm as a backup?
I have a python remote start alarm system and have the python transmitter 479 vpx the instructions that came with it say channel 1 for remote start. Question is what channel should I go with? 7 or 1? And what button on transmitter should I press when pairing?
You rock my man!!! Thank you so very much...
Hey sir can you help me? I’ve been trying to program mine and I can not?
Great Video, I'll program mine 2morrow. Thanx!
How did you program the old one
Really appreciate your video very helpful can i get a copy of the programming manual please.
After the 7 led flashes. What do I press on the remote? Do I press the aux button? Or the program button on the back?
I have a viper 3305 remote and viper alarm. My battery was dead for a few weeks and I just fixed it. My alarm is stuck on so when I open the door the alarm goes off and the remote isn’t doing anything but beeping 3 times then nothing. It’s on #1 so that’s not it. Any suggestions on how to turn it off so I can use my car? Putting the key in the ignition doesn’t do it. That won’t stop it from going off.
Did you figure out the solution? And what was causing this issue? Same thing is happening to me.
Can you still do it if you loose the original control and no keys for the car ??
Can I get a copy of the manual cuz I also find it very hard to not find it
Are you pushing the little black antenna transmitter ?
Thank you so much, I have been going crazy trying to get info, please I WOULD like to get a copy of the full installation manual for the R350 alarm system. Also, my little button has fallen inside, has anyone ever opened one of these?
great job 👍very detailed and easy
Can you add a second 7345v or adding a second will erase the first.
can you set up the volume of the remote alarm when are some "unknown activities" ? i mean its sound kind of weak, needs some higher volume
the new remote that you showed on your page would that same program work to program the blue remote your
Can you walk me or send me the instructions on how to program my viber replacement
My email is send me the instructions on how to program my viber replacement alarm model 7345v denise.johnson10@yahoo.com
how do you know what channel it needs to be on
Great this helped me out much, though it looks so much easier when you do it.
I need to get that manual because my alarm is not working.
My nephew lost my remote to my viper car alarm system. It looks exactly like the old remote that you have. The model # is 3X05. I'm trying to figure out if the new one you bought is also compatible with model 3X05.
If you know, I'd really appreciate your help in finding this out
Thank you
Can you send me the instructions please my truck has a remote start abd also has the fuature that my windows close when i lock it
Exactly what I needed... Thanks!
Can you open the trunk and hit the star button and the alarm go off the way you did it?
So I found a brain for a viper 3105v. Is there a way to pair it without the original key fob? When I plug it in, II can hear the clicking from the relay clicking the alarm on and off in the alarm brain.
What button were you looking at down by the brake pedal ?
Hi Tom. My Viper keeps unpairing randomly. Do you have any knowledge of why this happens and how to resolve the issue?
Can i program a regular key fob to the alarm?
My remote shorted out. I do not have another original. Is there a way to pair it with the alarm going off?
Hi this is Norris I did not try to set the alarm as yet and if send me the menul I can set the key less remote I purchased from you.
hey tom I'm trying to reprogram my remote I had the old version and had a guy program it fir ne and one day it stopped working I'm doing the procedure but it won't sync I push it 7 times and hold and the alarm needs and when I push lock button on the remote it doesn't work what am I doing wrong.
Do you know how to program all door locks to open on a single button push
is it possible to add a pager to a viper 3105v
Did you find out?? I know it’s been 4 years since your comment.
Hey thankz man helped me out I was going crazy trying to figure out what my wife did and y the alarm just kept going off lol wrong channel
Hey Tom....On my 7345V remote, there is a very small number 2 on the display screen right in front of the car image. I saw a number 1 on your remote. What exactly is that number 2 for? I think I might have missed it up. Thanks Man!
Hi there , this help a lot but will this work for the Viper 5305v and if you have that manual for it please :-) thank you
thanks a bunch bro . your video helped me out a lot!
will this work with an AVS alarm?
Can I get copy of that program
Hey Tom, I have a 04 rx330 with a remote and security system installed but did not come with the remotes. Can I still use it or do I have to remove the old installation?
What button am I looking for?
wondering if you could email the manual. just bought a used truck that has no remote for the viper system. hoping I can buy one from best buy and program it. is this possible.
Works. Thank you
My key faub won't receive right anymore it's on 5 when it should be on 2 I think. But I can't get it to change. So I can't shut my alarm off when it goes off.
How can I email you to get the manual? You are the best!!! Now my system is working perfectly!!! Can't thank you enough!!!
Can I get the manual for the alarm
worked like a charm! thanks
Thank you! Worked perfectly! Thanks again
would be grateful for a copy... thankyou!
Hi would you mind sending me that document this alarm is driving me nuts
Thank you so much..Just what i needed