ฝัง
- เผยแพร่เมื่อ 26 มี.ค. 2017
- Learn how to wire a motorcycle alarm, remote starter, and immobilizer!
The techniques in this video can also be applied to cars
How to wire LED lights:
• How to Wire LED Lights...
How to Install a Fake Alarm Light: • How to Install a Fake ...
If you guys have any questions leave it in the comments below.
Thanks for watching! - ยานยนต์และพาหนะ
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
Young man you are a real tutor,your explainations give me enough trust to install the alarm with trust!
“Enough trust... with trust” I understand you’re trying to give props but you’re just being redundant
@@jamesmaguire2850 please understand that English may not be this person's first language. The message they want to convey is plenty clear enough.
After many tries to find some help I found this very helpful clear and well explained video.
Thanks for your time and efforts.
Perfect
I'm installing my alarm on Tracer 900 tomorrow. Your video is very educational and will definitely help. Thank you and keep up the good job!
Nice video brother!!! I bought a alarm with remote start about 6 years ago and about 3:26s into the install I changed my mind. I think I’m gonna try it for real this time. Nice work man
Man that was fantastic. I watch tutorials for legit everything nowadays and that by far, was one of the best. No bs, no fluff; just super clear, straight to the point, and easy to follow as well as start and stop. Now all you need to do is buy a Hayabusa and install every mod I’m looking to do on mine. That would be fantastic and I’d really appreciate it. That’s not too much to ask right?😂 But seriously, I wish all tutorials were like this. Great job bud
By the way I like how you explain the installation process!!
BRAVO! This was very informative and detailed, I appreciate it. For a while now i forgot the reason people uploaded HOW TO videos to youtube, until now.
Thanks!
this video is so well explained and video'd i literally taught myself wiring from ground zero , because i hyperfocused and started googling , damn all i wanted was to look cool infront of my friends ,
now i feel like i just did a whole electrial diagram course
Thanks for this amazing tutorial! I will try this on my GSXR 1000
Bro your bikes gonna get snatched if you even consider this product. The only truth system is sleeping with your bike next to your bed or in your garage and if you do leave it parked in public be ready to throw hands because Summers gonna try to throw in a pick up and take off
you are the man I tried to hook that up for mouths and in 30 min you told me how to do it thanks
It may well be the most comprehensive video on the subject of cheap chinese motorcycle alarms, kudos!
Have you tried to sniff the signal sent by the remote? I wonder if they were smart enough to use a rolling code.
This is a very nice and complete video. It really helped me to install one of those on my bike and saved me a lot of money. Thanks buddy and greetings from Greece.
Καλησπέρα φίλε από Αθήνα 😉. Σε τι μηχανάκι το έβαλες και σου εμφανισε θέματα με τον καιρό; Σκέφτομαι να τον βάλω σε Kawasaki versys
@@xxoustou Μην ασχολείσαι φίλε. Είναι ένα ακόμη κινέζικο σκουπίδι. Το έβαλα σε ένα Kawasaki zzr 600. Το καλώδιο που "κόβει" το kill switch είναι τόσο μικρό σε διατομή που δεν άφηνε το μηχανάκι να πάρει μπρος
@@christospiperkos4527 Κατάλαβα.. Θα μπλέξουμε.. Έγινε φίλε μου σε ευχαριστώ
great video! Fot the folks wondering the kit is called "BlueFire Motorcycle Security Kit"
Soooooo good tutorial. You are amazing bro!
Hi Brovacs, can you tell me if the same resistance (100 Ohm?) you install on ignition to remote start,can be right for a Suzuki bandit 1200? I don't know how to get the exact resistance forma this bike. Thanks form your tutorial and help!
Make sure your in neutral when remote starting
You are only bypassing the starter switch, not the safety switches. So if the bike is in gear the starter wont activate.
@@dylanjones678 safety switches often fail
If the safety switches fail the bike will probably try to sleep on the ground
A great help, Cheers.
Thank you for the vid! I was wondering where I can figure out what size fuse I need for my motorcycle? Reference to 1:11.
Thanks!
Great video...thanks...now where do I find the tap connectors and other connectors? And I have a 2007 Honda shadow Sabre, will the kill switch and starter function work on it as well?
Thank you for the video
I can't find a wiring diagram for gilera dna 50
But under the seat the is a ready wires to connect alarm (dna alarm made for this type of Motorcycle)
But i cant find on Internet so i bought alarm same as yours
I allready conected the red and black and the 2 yellow to the blinker and it is working
But still the start and off Funktion need to be connected so There is 4 wires blue gray orange pink
But i dont know the wires colors of this gilera dna 50
Can you tell me what to do?
Thank you
Not sure if anyone has mentioned this but i found that with mine, rotating the unit 90%(wires facing left of bike, laying flat) made a HUGE difference with the sensitivity of the unit! initially I could shake the crap out of it with it parallel to the bike and it would Not go off, but now its like his video and just a little shake makes it go off to the point where i might have to turn the sensitivity down.
Any chance you know how to set the sensibility mode? My alarm keeps startling for minor reasons,like rain or wind.
Hi thanks for the video, I be able to connect blue, red and black, I have kawasaki er 5 and just wonder do I need resistor for the orange, and I tried all the wire from the ignition switch but no help. Bike now tried to start but won't start unless I but the key in on
I like that test probe you have it holds the wire in place for you I would love to get one like that
Very nice tutorial.
Great video young men,
I have a R1 2004 i live in Germany I connect the remote start with a relay pin 30 and pin 86 connect together and then ground to the bike the blue wire from spy 5000 to pin 85 and then pin 87 to the right side of the bike to the blue wire from the starter switch on the handle,the engin won’t turn over but if i put the key in the ignition and turn it to the on position it will start with the remote,on the left side there or some wire coming from the ignition so I connect the 2 wires dash light up engine turn over but will not start,any help.
Good day sir. There is a line for START in the module, where do i connect this in the start key line of motorcycle? There are 2 lines which one? TIA
Hi Brovacs thanks for the video, ihave a question regarding the antihijacking feuture, if your are driving and activate the alarm this will stop the bike but will aso blow a fuse?
Trying to follow your write up for my install on a 09 Yamaha R6S, however, there are many differences between the 2. Any way we could discuss it? No write ups online for it either. Have wire diagrams, and pretty wire savvy.
you are a boss!
Hi, great video, very informative.👍 Before i get going with my project, i was wondering if wiring in the remote starter to a TDM 900 with a built in immobiliser which needs a coded key is the same process you used. i.e. blue wire to starter relay, orange wire to starter switch and resistor to ignition switch/ground.
Any help would be most appreciated, thanks in advance.
got this today for my xenter 125 (2017 edition) the instructions that come with it are useless but since someone had a go at stealing my bike last night I decided i had to atleast install the alarm. I connected the red wire to the red of the battery and the black to the black (I did not get any of the connectors you used with my kit so i twisted the wire around the screws on the battery, should be ok? ) also i did not get a fuse with mine, as well as not getting the connectors, everything else looks the same, did i get a counterfit copy? how nervous should I be?, i mean the alarm works but I am now worried i will get a flat battery or a fire! (never done any diy work on a bike before)
Does the blue wire go to the start switch in the start relay as I'm trying to fit to rocket 3
Very well explained
Do we need to do the resistor bit if we dont have any security system like a steering lock on the bike?
I a installing it to a yamaha raptor quad bike??
Bro! Vacs! You're an electrical stud.
where do i connect the grey wire and pink wire coming from the alarm to my mio i 125 motorcycle?
pls responce thanks
amazing ! everything looks so easy with you. I ve never seen such plugs and tools you have used (I m not garagist)... your video is amazing ! thanks. is there something much easier for a beginner like me ?
Great video, how do i set the sensibility of this alarm?
Hi is it possible to connect a diode to this alarm so when the alarm is on keep flashing
and if so which wire to use.Regards
Are you familiar with the 2007 honda vtx 1800t adding a remote start? And if so do I need a resistor or relay to get the remote start to work? Thanks
Hay do you compromise the safety of your motorcycle by installing a remote starter. Makingbit easier to steal via say hot wiring?
Will the bike start whilst In gear or whilst the kick stand is down?
hi i have a yamah R1 2004 and would like to install my remote start spy 5000m,i have seen loads of video on here showing the bike starting but not how they do it,I have seen someone just just disconnect the wires from the key but you used a resistor can help me find what resistor wouöd i need,I also see ppl used a relay to connect the blue wire to any idea why.
Thanks so much.
How about for DC-CDI? where can i apply the resistor?
What fuse did you use because I can’t find any that can fit
I need some advice on wiring one of these to a yamaha pw50 so I can remotely kill the engine. The kill switch on the bike has start, run, and stop, so it has me stuck.
Hi I buy an alarm and I get wiring diagram for my bike. I connect the red and black to the battery. I connect the blue to the starter and I hit the bottom on the remote start and the bike try to start but don’t turn. The orange to an accessory but I don’t know where I have to install the resistor
On the orange and gray wire what wire are you hooking them too you did a good job on the rest but stumped me on the others
It's great video I do wish when you by theis alarms to come with the blady instructions wriring with it!! So that helps customers know what thay need to do so you don't bloow it up.
Hey man.
The cable system in my dl650 is same with your bike. I've connected all as you described.
But only fuel pump does not work when I'm trying to start he bike with remote.
Just one moment I couldn't understand correctly ,where you've installed the résister.
I can't see clearly you've connected orange and grey cables with résister or what?
And where I can find his résister. ?
Regards.
Hey I'm trying to hook one up to a raptor 700 I shouldn't have to do the resistor thing should I?
Hi im pretty comfortable with everything you've done i just kind find what size resistor i need for my 2006 Yamaha R6. Any chance you could help me out with this?
Instead of connecting engine start wires to start my bike can I connect them to turn on LED lights I have installed. Don't want to start bike without key
hi guys I bought a spy5000m for my zx10r 08 its kindalike this alarm system I wired the alarm and flashers.... all I have left is the remote start/kill but I was searching and found out that with the imobilizer I need to place a resistor because of the key-imobilizer. how come he could start the bike without placing this resistor on his bike and what are the pink and grey wires? I could not understand that part
Fuse, ring/spade connector, tester and tap connector? Where did you get those?
if we connect this device while remote staring does ODO meter and switchs work??
Hi. I have an similar alarm, with same wires. The thing is that I got all the wires connected where they should be, but when I double tap the lighting button from the remote it just turn on the ignition but doesn't crank. I mention that the bike is a 2004 yamaha fz6 and I did not put a resistor like in your video because I'm not sure where to put it and if this might be the problem. If anyone can help me with some info about that, would be nice. Thanks.
Where can i find the auto start and also can i install it on a honda innova 125i ANF
Hi, what kind of resistance do I need for a ktm rc 200?
I don't understand very well how to connect the remote start wires
2:28 my brain is on fire
Diş Ipi..... i will second that 😑..🔥
That's his motorcycle wiring diagram you don't really need that
@brovacas , may you explain better the first metod to wire grey cable and pink cable? thank you
when using your remote started.. does you need to have your ignition key on and turn on?? for some reason mine wont start if i dont have the ignition key turn on.
hi good day. nice guide. but still im missing where to install the gray and pink since we dont have same bike and wiring diagram
Awesome, great tutorial. Question. When installing this,. Can I get rid of my ignition key?
Congratulations on the video, does the motorcycle need to have the key in the ignition to turn it on? I have a r1 2004, does this alarm system work on this bike?
A very Good n Detailed explanation, which i never found on any other "How to"
If possible could you suggest where will i have to use the "Immobilizer" wire/wires to a KTM Rc390.
I have more than basic knowledge about my RC390 n the Wiring, but am Confused about the Immobilizer connections. Waiting for ur rply... Thx.
Hello, am trying to fit this alarm system on my bike, am leaving out the 2 wires of remote starting up because it is kick start only but I would like to fit grey and pink wires so it will be on and off from my remote. will you please explain more where these wires to go? Thanks
the orange wire - connecting it to the starter switch lights up the dash?, my problem is the starter motor works but the electronics are off
great vids. where did you get your automotive test light? thanks
What size resistor will I need pal? I've got everything else working but the engine start just turns the bike over won't fire?
Hey do i need to put the keys in the switch to make the bike start remotely or not ?
Hi how are you i hope you will be in the best case..
I have a simple question and I hope you will answer me
I have a spy alarm system 5000m and my motorcycle is Suzuki GXR1000 K7 but unfortunately I can not install it with the knowledge I have tried very much but every time it turns off fuel pump
Can you help me with that and I will appreciate that
bro thx for the video
i want to install same device but ALARM no needed remote start ,auxiliary boot open
Hi. Can you help me telling which resistor should I use for my bike? I do have a 2014 ninja 650r. Thanks.
where can i connect pink and grey wires in my Yahama FZS
did you wire the resistor from the ground wire to the wire running to your ECU
What amp of fuse did you use on the bluefire box 5 10 20 or 30
Hi ! If I want to use it without auto start for my bike , is it just connect the power for the alarm and then connect the yellow wire only that's all right ?
Which mean that I use only 4 wire only ... ?
Thanks :)
Tanx for the information
But after installing the alarm system on sv650s nothing work on the bike if I start with the remote the only thing that work is the engine,is there something i am not doing right
Are u able to find a wiring diagram for a 2009 Harley Davidson for remote start
What size is this fuse you connected to the positive terminal???
Can anyone advise me on the right resistor needed for a 1983 Honda CB1000C?
I need a resistor for suzuki sfv650 gladius ??
I hope ypu answer this comment ik the videos old but how does tour one so sensitive my one takes a good amount of shaking the bike to make it go off
great tutor. but can i have a link to search for the resistance which is suitable for kawasaki ninja 650 abs 2017. wish you can help me with that cause i can't find it
Hi where did you get the headlight for the sv the look cool
Hello...... If i am connecting to my headligh for flashing when alarm goes off, does it matter where along the headlight wiring i connect? Many thanks
What's the name of the circuit tester you use in detecting signal light?
Hi I like to install one too but my scooter seller tell me that will have problem after few months due to the fuel injection system ???? any idea for it ???
tks
Does this work on e bikes example
Electric enduro ebike
I have a Honda NC 700 X where can i find the installation manual for this bike
Handy tip if you unplug the screamer while your fitting this, the alarm will still give off enough noise to notify you that it's triggering properly without deafening you. Once your done tinkering you can plug it back in and have your ears unharmed.
Given how many bikes are sold with alarms that have been bodged into place this comes in handy if you have an alarm pre-installed but doesn't work as intended so you have to play around to find the short
How do you set the sensitivity settings? 4 bips or 1 bip is more sensitive?
Is that the "Samoleus" or the "BlueFire" ? There are 2 on amazon they look exactly like this, but which one is the one you are using?
good man
Hey i installed this follow wiring in the manual given by vendor. I have one problem now i have removed all things. What problem i meet and still my motorcycle in problems. Now i switch on key but engine symbol not of fuel not on i can't switch on my motorcycle
I really want to go ahead and install my system, but I have a 2007 Kawasaki EX250 Ninja. I'm having a hard time figuring out what fuse to get to protect my bike. What fuse did you use, or do you have a recommendation for this particular kind of thing?
When I connect the blue wire, and click on remote start, the fuse from the alarm system blows. Help me.