There ARE people who think they know how to install an alarm. I seen myself some disappointing jobs. Luckly I was trained by old school installers and applaud you for your work. I always take pride in my work and cant stand mickey mouse jobs. Starting off with a good brain prep will make everything much easier.
I am surprised to see none of these mechanical wire connections soldered. Wire lacing [IMO] would be a better choice then the stress the drill puts on the wire.
I'm currently prepping an alarm/remote start system to install in my 06 Tacoma, and this video has by far been the biggest help (aside from PDF wiring diagrams, lol). Thank you for taking the time to put this series together!
You have to finish all joints with solder or some other insulated crimp connector with gel inside to prevent oxidation. Any wires just twisted together will always eventually not provide a good connection. I've seen wires twisted together about an inch and half and still there was no continuity between the 2 wires unless you shook the connection.
Thanks for all your videos. I just finished installing a cheap avital 4103 on my cts using a gmdlbp cause it has a pk3+ and I feel much more confident. My biggest problem are the doors. If I didn't use d2d from the module for the doors, it would have taken me a long time to find the door wires. Any good light testers you would suggest. I was losing a lot of time pinching threw the wires looking for positive feedback. Even better if there is one that tells the negative current . Again, thank you for showing us your work. You are def a true professional and I have used you as my reference point many times.
I have a 2003 chevy Silverado base model that I put a aftermarket power windows and locks kits in how would I wire it to make the lock and unlock remote to work with my truck.
Awesome, Thanks Lessco Electronics, It's because I'm trying to install the Excalibur AL-2075-3DB-L into a BMW E36, with 1 complete loom BMW and 1 complete loom Toyota, as it's a engine swap and I'm unsure of the method of how to splice and lighten the loom without destroying its functionality. So BMW With Toyota 2JZ engine, plus its a huge mess right now, and no Electrician would take this job on for any reasonable price (don't blame them). Again thanks for the reply and the link to pt2
I get that question alot, And it's always a tough reply. With good resources and general handiness, Most people can do it themselves. And yes on the python 533 - You may like my video on how to wire an alarm in detail, I use an avital 5303 which is identical to the pyhon model youre interested in.
what I think is that I only connect the cables to D2D and it should work? I have a viper that does have the red D2D connector. to which wire do I connect the other cables to? the connectors have the followign color cables: black, ping, green, blue/white, yellow/black & purple/white
im going to install a car alarm mark carbine in a toyota yaris 2009 and i was wondering if u could explain if i have to do a dabble pulse in tha door lock. the information about the wire says that needs the dabble pulse but in another says that its a type B but i dont know what that means?.
After installing a Viper 350 in a 95 Mustang it picked up a dim parking light flash that last about a minute after opening any door. Its set on the positive door trigger. Looks like feedback. Any idea if I need to diode isolate the trigger or something else? Thx
Installing an ultrastart 1272. My 2012 Tacoma has starter 1 and starter 2. The remote starter only has 1 starter out-put. From what I have been reading it will start in the cold just not correctly if I only connect 1 of them. What do I do ? If I have to install a relay how do I go about that and do you have a video for that ? Purchased the Ultra-start from your store, and any assistance would be greatly appreciated.
how accurate are the wiring instructions? I have noticed that there was a mismatch with the accessory compared to another one listed on modified life, for the nissan sentra 2007
hmm.. so would i have to use the bitwriter to use it? because when i try to turn the key to ON and then press the ARM buttom it doesnt beep or anything
nice! I wanna do the same on my Acura RSX. Already got the alarm system, immobilizer bypass relay, and a power windows relay (to make the windows go up when I lock the car). Seems to be complicated. I should watch some more videos I guess. Particularly about RSX model. Unless this toyota is similar stuff!
so my al-1830-edpb alarm on my 91 acura integra had it installed almost 4 years ago no issues with it but the last 2 months it has been setting the alarm off by itself no one around the car nothing at all tonight it went off 6 times by itself ever had this issue if so how can it be corrected also can u provide the security system wiring diagram for my 91 acura integra gs thank you Tommy
Thanks for the video! I am installing a viper 5704 remote start system into a 2012 Honda CRV and was hoping you could help. I already have the xpress dball interface module and the xk-loader2 to do the job, however the wiring diagram from command alarms.com says I need #775 relay for parking lights. I checked the website you gave and it doesn't mention it--do you know if it's necessary? This is my 1st install so if you have any other tips for a Honda CRV I much appreciate it!
I'm trying to install a pk all xpresskit bypass for remote start but it appears that my Nissan Sentra 2007 is not supported, can you confirm this or is there a way to make it work?
Im trying to intstall a remote start on my 2011 corolla but I cannot find a tech for my vehicle. I want to do this the right way and I like your approach. Is there anyway you can send me the tech sheet?
Martin I would like a remote starter and alarm on my 03 RSX Type S I was looking at the compustar 901 system but can't get one and install it... What is omegas flagship model now? Thanks on advance for everything!!!!
does the website still exist? if so could you post it for us? i have a viper 5305V and i am trying to install it in a 98 Ford Explorer Limited. And I need a cheat sheet so i know how to hook it up.
i want to know if the place that did my alarm system left the wires in for the remote start because when i got my alarm system done i didnt want the remote start installed at the time. i was a little sketched out about getting it because i heard stories of remote starts in manual transmission cars but now im considering it since were in the winter months now. so how would i know if they left it i have the 5706v viper alarm
No why I wouldn't solder the wires for the starter bypass relay, minimum a wire nut or crimp connector. If those come loose you can't even start the vehicle with the key.
I have a problem I am installing a alarm/remote start on to my 2008 honda accord I bought the Excalibur al-1950 with a blade al-64 My problems are the the alarm has a neutral safety (-) were dose this go to? And also I install the blade bypass to the correct wires but there is still 2 cables that is asking for to conect witch is the white/black qnd the white wire were do this go to I see the wilhite one is ground but were do I put them thank you and hope you are able to help me ..
I'd advise you to tie the neutral safety wire to your ebrake, so once its engaged itll allow starting to occur, but you can also add in a switch or just ground it and be more responsible with using it
But if I connect it to my ebrake tht meens I have to have my ebrake up when I put my car in park dont it my car is auto or am I wrong and also the two wires on the bypass the white gose to ground and the white/black it says to hook up to a door pin I dint c a door pin in my cheat chart
Good afternoon! Where can i find a specific help video and paperwork by you for system Model 3100LX installation in a 2003 Chevy Suburban? Thank you in advance.
Great Work , that looks really good. Looking to do a double bypass Parking break for my stereo system do you know how I might be able to do this easily ?
+Art First you can simply buy this www.ebay.com/itm/Double-Pulse-Bypass-ALL-AVH-PIONEER-PARKING-BRAKE-VIDEO-DIY-Bypass-Override-/361071251028?hash=item5411860e54
I have a 1995 toyota camry and I want to install a remote stater alarm system the remote stater is a RF 425 but I have to wires on my car wich they are positive so w I dont know how to hook up or wich one can you help
Hi did you know anything about the RF 425 autopage I try to install one on a toyota camry 1995 can you send me the diagram how to installed if posible thanks
Wow u didn't solder that wire just twisted and tape thought u was gonna show us how to.do it right i was like dude know what he doin till u did that just plain lazy solder and shrink wrap everythin u can then if not.solder and tape.it.up good
See why I cant stand DEI, when will people learn??????????????????? Buy an Omega alarm (or any other for that matter), You wont have these stupid problems
By watching your videos. I was able to install the Pioneer 7" AVH-P8400BH in my 2005 Chevy SSR. Thx for your insight. You the Man!
Thinking of installing a remote start in my car . Lots of great ideas here .Thanks .
twisting the wires like that is a good ass idea
thanks for taking time out your day to make these great vids, very helpful
There ARE people who think they know how to install an alarm. I seen myself some disappointing jobs. Luckly I was trained by old school installers and applaud you for your work. I always take pride in my work and cant stand mickey mouse jobs. Starting off with a good brain prep will make everything much easier.
I am surprised to see none of these mechanical wire connections soldered. Wire lacing [IMO] would be a better choice then the stress the drill puts on the wire.
I'm currently prepping an alarm/remote start system to install in my 06 Tacoma, and this video has by far been the biggest help (aside from PDF wiring diagrams, lol). Thank you for taking the time to put this series together!
SoLottaTech SoLittleTime how did your install go and how did it hold up?
You have to finish all joints with solder or some other insulated crimp connector with gel inside to prevent oxidation. Any wires just twisted together will always eventually not provide a good connection. I've seen wires twisted together about an inch and half and still there was no continuity between the 2 wires unless you shook the connection.
Thanks for all your videos. I just finished installing a cheap avital 4103 on my cts using a gmdlbp cause it has a pk3+ and I feel much more confident. My biggest problem are the doors. If I didn't use d2d from the module for the doors, it would have taken me a long time to find the door wires.
Any good light testers you would suggest. I was losing a lot of time pinching threw the wires looking for positive feedback. Even better if there is one that tells the negative current .
Again, thank you for showing us your work. You are def a true professional and I have used you as my reference point many times.
Theres a tester called power probe itll give you power feed back and ground feedback as well
That car is pretty straight forward, I'd expect a 125-150.00 install / labor charge, Thats about the going rate now
Sure, whats the year make and model of your car and the brand starter youre using?
I have a 2003 chevy Silverado base model that I put a aftermarket power windows and locks kits in how would I wire it to make the lock and unlock remote to work with my truck.
Awesome, Thanks Lessco Electronics, It's because I'm trying to install the Excalibur AL-2075-3DB-L into a BMW E36, with 1 complete loom BMW and 1 complete loom Toyota, as it's a engine swap and I'm unsure of the method of how to splice and lighten the loom without destroying its functionality. So BMW With Toyota 2JZ engine, plus its a huge mess right now, and no Electrician would take this job on for any reasonable price (don't blame them). Again thanks for the reply and the link to pt2
I get that question alot, And it's always a tough reply. With good resources and general handiness, Most people can do it themselves. And yes on the python 533 - You may like my video on how to wire an alarm in detail, I use an avital 5303 which is identical to the pyhon model youre interested in.
Me gusto mucho su video, valoro en espanol su aporte por ser tan didactico y practico thanks
the red wire and white wire from off the relay goes to were? i see the orange goes to the orange on the main wire harness on the module.
What do you need explained exactly? you didnt say much. I also posted a alarm wiring in detail video last week, take a look at that one.
You can grab the door triggers independantly in either kick panel, Thats what you need to do on that car.
what I think is that I only connect the cables to D2D and it should work? I have a viper that does have the red D2D connector. to which wire do I connect the other cables to? the connectors have the followign color cables: black, ping, green, blue/white, yellow/black & purple/white
im going to install a car alarm mark carbine in a toyota yaris 2009 and i was wondering if u could explain if i have to do a dabble pulse in tha door lock. the information about the wire says that needs the dabble pulse but in another says that its a type B but i dont know what that means?.
How do you go about choosing the correct system for your vehicle? I have a 1994 Toyota Land Cruiser?
After installing a Viper 350 in a 95 Mustang it picked up a dim parking light flash that last about a minute after opening any door. Its set on the positive door trigger. Looks like feedback.
Any idea if I need to diode isolate the trigger or something else? Thx
Hey body I'm trying to instal a compustart on my 07 tundra but I dont know where to find the wiring diagram can you help?
Installing an ultrastart 1272. My 2012 Tacoma has starter 1 and starter 2. The remote starter only has 1 starter out-put. From what I have been reading it will start in the cold just not correctly if I only connect 1 of them. What do I do ? If I have to install a relay how do I go about that and do you have a video for that ? Purchased the Ultra-start from your store, and any assistance would be greatly appreciated.
how accurate are the wiring instructions? I have noticed that there was a mismatch with the accessory compared to another one listed on modified life, for the nissan sentra 2007
hmm.. so would i have to use the bitwriter to use it? because when i try to turn the key to ON and then press the ARM buttom it doesnt beep or anything
What do you mean by positive lights, always was taught you needed negative.?
nice! I wanna do the same on my Acura RSX. Already got the alarm system, immobilizer bypass relay, and a power windows relay (to make the windows go up when I lock the car). Seems to be complicated. I should watch some more videos I guess. Particularly about RSX model. Unless this toyota is similar stuff!
so my al-1830-edpb alarm on my 91 acura integra had it installed almost 4 years ago no issues with it but the last 2 months it has been setting the alarm off by itself no one around the car nothing at all tonight it went off 6 times by itself ever had this issue if so how can it be corrected also can u provide the security system wiring diagram for my 91 acura integra gs thank you Tommy
Thanks for the video! I am installing a viper 5704 remote start system into a 2012 Honda CRV and was hoping you could help. I already have the xpress dball interface module and the xk-loader2 to do the job, however the wiring diagram from command alarms.com says I need #775 relay for parking lights. I checked the website you gave and it doesn't mention it--do you know if it's necessary? This is my 1st install so if you have any other tips for a Honda CRV I much appreciate it!
I'm trying to install a pk all xpresskit bypass for remote start but it appears that my Nissan Sentra 2007 is not supported, can you confirm this or is there a way to make it work?
Im trying to intstall a remote start on my 2011 corolla but I cannot find a tech for my vehicle. I want to do this the right way and I like your approach. Is there anyway you can send me the tech sheet?
How do I bypass ignition wiring? I’m using one in my house with bolt locks
Where where you get mercury switch
I have have the Excalibur AL-xx70-B for a 2005 Chevy suburban. Where can I find the info for installation?
how can i add remote start to a 95 mustang with the viper responder 350? will I need another remote? thx
Looking for diagram for connecting this alarm to 2010 Hyundai Genesis Coupe 2.0T Premium.. Appreciate any help thanks
how can you program the viper 3305 with the valets mode bottom?
best way is not a fish knot! solder is the only way to insure its a good bond! thank for the drill idea I am stealing that one :)
\
Martin I would like a remote starter and alarm on my 03 RSX Type S I was looking at the compustar 901 system but can't get one and install it... What is omegas flagship model now? Thanks on advance for everything!!!!
so i have an acura integra type r. Do you know if i can use viper's VRS? sorry im still newb at this stuff
i hate to say it but when you twist them wires their easy to spot for a theif so disarming it would be easier i think
those 2 wires interrup the starter wire (starter kill disable relay)
if i install a viper 4105v to my 2014 toyota corolla LE , do i need to get a bypass?
yes, you will be needing one.
how would i find if my lights are positive, locks are negative ect?
does the website still exist? if so could you post it for us? i have a viper 5305V and i am trying to install it in a 98 Ford Explorer Limited. And I need a cheat sheet so i know how to hook it up.
i want to know if the place that did my alarm system left the wires in for the remote start because when i got my alarm system done i didnt want the remote start installed at the time. i was a little sketched out about getting it because i heard stories of remote starts in manual transmission cars but now im considering it since were in the winter months now. so how would i know if they left it i have the 5706v viper alarm
David Kuse it's probably another unit altogether. plus you probably won't find a place to install it on a manual because of safety reasons.
I purchased a sheet from you and am having trouble creating an account to log in
i need help installing a viper alarm start on 2006 jeep wrangler would you help ?
nothings perfect, but theyre about as good as you can ask for, a test light is always right, dont underestimate real testing
hello! can i have the tech sheet to install an alarm whit remote start in my 03 gmc sierra
You say techsheet frkm your website but you didnt leave a link to your website.. and google serch can't find you
No why I wouldn't solder the wires for the starter bypass relay, minimum a wire nut or crimp connector. If those come loose you can't even start the vehicle with the key.
Anybody know where I could get Tip Sheet for 2015 Honda Pilot to hook up remote start and keyless entry wire up excalibur rs-360-edpb v2.0
Can you recomend a bypass?
I have a problem I am installing a alarm/remote start on to my 2008 honda accord I bought the Excalibur al-1950 with a blade al-64
My problems are the the alarm has a neutral safety (-) were dose this go to? And also I install the blade bypass to the correct wires but there is still 2 cables that is asking for to conect witch is the white/black qnd the white wire were do this go to I see the wilhite one is ground but were do I put them thank you and hope you are able to help me ..
I'd advise you to tie the neutral safety wire to your ebrake, so once its engaged itll allow starting to occur, but you can also add in a switch or just ground it and be more responsible with using it
But if I connect it to my ebrake tht meens I have to have my ebrake up when I put my car in park dont it my car is auto or am I wrong and also the two wires on the bypass the white gose to ground and the white/black it says to hook up to a door pin I dint c a door pin in my cheat chart
I have a 02 escalade I was thing about installing one my self do u have diagram
Is there a way to reset a compustsr cs800s remote start brain.?
whats so bad that you need to reset it completely?
Good afternoon! Where can i find a specific help video and paperwork by you for system Model 3100LX installation in a 2003 Chevy Suburban? Thank you in advance.
Alvin Wright email me. Ill get it to you
Sales@lesscoelectronics.com
Great Work , that looks really good. Looking to do a double bypass Parking break for my stereo system do you know how I might be able to do this easily ?
+Art First you can simply buy this www.ebay.com/itm/Double-Pulse-Bypass-ALL-AVH-PIONEER-PARKING-BRAKE-VIDEO-DIY-Bypass-Override-/361071251028?hash=item5411860e54
Art First bnnhhhhhjnhuu
l(j^ddddffrtyyyjol
..
thank you , i figured it out =)
Art First or you could've built a relay or grounded the brake wire depending on the cars wiring
where can i find the document to prepare a 2004 Chrysler seining sedan and a 2004 ford explorer ext
+Pingdw Wed using a avital 5303 . thank you
@lessco electronics where can i find a diagram for my 2014 nissian sentra
+lAndscAper96 email me the request and Ill give it to you sales@lesscoelectronics.com
sure, it's wiringinstructions-com password is B92F0136
or use bulldogsecurity-com thats free too
please help how do I determine if my car is a negative or positive trigger, I have a 2005 ford freestyle
+Dominic Sierakowski here is the info:
DOOR TRIGGER
ORANGE/WHITE (-)
@ SJB, GREY 26 Pin Plug, Pin 21, See NOTE #3
+Lessco Electronics heres all the rest of the fords wiring too!
www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
+Lessco Electronics thank you so much. by the way I'm a big fan of your work and I thank you for all your help
Need a wire diagram for 2001 discovery and don't know where to find it on your website. Can you send link.?
email me at sales@lesscoelectronics.com please
its all personal preference, there is no right system for everyone.
thank you
That is all well and good until you twist the wires too much and break them inside the insulation. Seen it happen.
whats da name of the website
I have a 1995 toyota camry and I want to install a remote stater alarm system the remote stater is a RF 425 but I have to wires on my car wich they are positive so w I dont know how to hook up or wich one can you help
The 2 white wires, right? Either is ok to grab.
so I dont have to conect both
please help when looking at a wiring diagram and it says type b for the wire what does that mean
+Dominic Sierakowski whats the vehicle?
+Lessco Electronics 2005 ford freestyle
Dominic Sierakowski it means negative
Space Cowboy thank you
whats the year make and model?
Just splice into the stock wiring, No need for all that fancy stuff
try liquid electrical tape.
Hi did you know anything about the RF 425 autopage I try to install one on a toyota camry 1995 can you send me the diagram how to installed if posible thanks
I am not familiar with them
thanks
Just do as I do, As for the wire info for the Nissan, its free at this site: bulldogsecurity
Have fun, Do a good job!
sure, no reason why you cant
may I have a password for wiring diagram?
can i get password to wiring website. THanks
i there a remote starter for a 1977 ford f100
You dont need it on your honda at all.
wiringinstructions-com password is B92F0136
Wow u didn't solder that wire just twisted and tape thought u was gonna show us how to.do it right i was like dude know what he doin till u did that just plain lazy solder and shrink wrap everythin u can then if not.solder and tape.it.up good
See why I cant stand DEI, when will people learn??????????????????? Buy an Omega alarm (or any other for that matter), You wont have these stupid problems
Thats just stupid. By charging less, he gets more customers. More customers means more money. It is simple.
watch this: th-cam.com/video/cqk08zGg0Ls/w-d-xo.html
You are selfish, you didn't explain properly you don't mention all colors.
Why are you throwing the tools like a hillbilly
+Albert Zemov interesting question, all this stuff to learn and thats what you ask?
Lessco Electronics i dont want to disrespect you. But it dosent look nice to throw tools. But i need to say that you are very pedantic with the alarm.
Ali Mesghali yes i am a DICK
where can I get the tech notes for a Nissan frontier ex truck electrical systems
+Leonel Jimenez theyre free at bulldogsecurity.com