@GRIM.2002 thank you!! I am really trying to be a good knowledgeable resource! See too many videos out there that are all the same but don’t have the accurate data you need!
New sub here you definitely have knowledge I’ve been reading some of the comments and I’ll definitely be reaching out in the future now would you happen to know much about the awd pursuit 5.7’s ?
To go e85 U did nothing to the fuel pump just 6.4 manifolds catless n kitty injectors wit tune ? I have all those parts on my 14 300c 5.7 n thought I couldn’t go e
@@ReidPerformanceMy 6-spd '14 R/T was programmed for a pig-rich 11.6:1 WOT. That was the base .0688 FA Stoich + WOT adder, up in the 4K+ rpm range. I leaned it out to about 12:25:1 commanded at WOT, only run 93-octane and she seemed to like it. No indicated knock, to speak of. I need to get it on a dyno with a WB O2 sensor. I hear NGK WB meters are good, and cheaper than a Ballenger AFR500.
@ronbo422 I use the AEM 30-034. Although you are commanding the 12.2… it’s best to not play with WOT fueling unless you have a wideband on it. It might command 11.6 in stock form.. but I’d bet it actually isn’t that rich at wot because of the injector data set up. I would guess it’s closer to the 12.1 area.
@@ReidPerformance Thanks for the tip. I put an AEM 0300 sensor kit, and a Prolink+ cable, in my Amazon cart. I'll return the WOT tables back to their stock values until I install it. On a slightly diff subject, what values do you address when longtube headers come into play? I know Transport delay has to be increased but are there other changes to the tune that are needed? Or will ANN "deal" with the increased exhaust (scavenging effect)?
@@ReidPerformanceI believe you already answered the question but with going with 6.4 headers I should get the 6.4 mid pipe with the catted converters right? I have an 05 magnum/charger rt rwd
Nice power. My 2018 T/A went from 348 hp to 374 hp on 89 octane and stock tune. These 5.7 cars should have been built with the 392 exhaust.
I totally agree
This channel is gonna be huge in the mopar community , he’s been pushing good ass content 💪🏽
@GRIM.2002 thank you!! I am really trying to be a good knowledgeable resource! See too many videos out there that are all the same but don’t have the accurate data you need!
sounds fkn beautiful 😤
@juandelgadillo4950 🙌🏻💯🥹
it natrually makes those pops or you added timing to the tune to give it that pop
Naturally happens when catless
New sub here you definitely have knowledge I’ve been reading some of the comments and I’ll definitely be reaching out in the future now would you happen to know much about the awd pursuit 5.7’s ?
@christianbello4621 thanks for the support. Yes I do. I have remote tuned a few of them in Florida
New sub 🎉 great video
When you connect the 6.4 manifold you left the active runners open on tuning ?
This car did not have the 6.4 intake manifold. These are the 6.4 exhaust manifolds. They have no runners.
To go e85 U did nothing to the fuel pump just 6.4 manifolds catless n kitty injectors wit tune ? I have all those parts on my 14 300c 5.7 n thought I couldn’t go e
@user-uw3jj4sq3c yep that is all that is needed. Stock pump can handle to about 420ish hp.
Dm me on insta be happy to tune it for you!!
I have a 14 300 5.7 did you change your throttle body and cai or are they stock?
So what was the output before the E85 and 6.4 exhaust?
@mcm95403 this car did not have a before dyno. But stock 5.7s generally make 330-340 and 340-360wtq on this dyno
With out going e85 how can I get to 420hp
In a 5.7 you can’t without boost
So the 5.7's like 12.5 - 12.6:1? Good to know.
12.5 is .85 lambda which is generally the goal of tuning WOT. Some cars make more power a little richer.. some make more power a little leaner
@@ReidPerformanceMy 6-spd '14 R/T was programmed for a pig-rich 11.6:1 WOT. That was the base .0688 FA Stoich + WOT adder, up in the 4K+ rpm range. I leaned it out to about 12:25:1 commanded at WOT, only run 93-octane and she seemed to like it. No indicated knock, to speak of. I need to get it on a dyno with a WB O2 sensor. I hear NGK WB meters are good, and cheaper than a Ballenger AFR500.
@ronbo422 I use the AEM 30-034.
Although you are commanding the 12.2… it’s best to not play with WOT fueling unless you have a wideband on it.
It might command 11.6 in stock form.. but I’d bet it actually isn’t that rich at wot because of the injector data set up. I would guess it’s closer to the 12.1 area.
@@ReidPerformance Thanks for the tip. I put an AEM 0300 sensor kit, and a Prolink+ cable, in my Amazon cart. I'll return the WOT tables back to their stock values until I install it. On a slightly diff subject, what values do you address when longtube headers come into play? I know Transport delay has to be increased but are there other changes to the tune that are needed? Or will ANN "deal" with the increased exhaust (scavenging effect)?
@@ronbo422 message me on Instagram and we can talk about it
Do you do email tunes?
@gioacuna5615 yes I do!
What is that exhaust?
392 exhaust manifolds and catless!
@@ReidPerformance does is increase the HP?
will the 6.4 headers connect to the stock cats on the 5.7
@brocknail242 you need 6.4 mid pipes as well recommended
@@ReidPerformance okay is a tune required? and do the 6.4 cats bolt up the 5.7 exhaust or does it need a reducer
@brocknall242 not required but beneficial
Needs a reducer or to be welded up
@@ReidPerformanceI believe you already answered the question but with going with 6.4 headers I should get the 6.4 mid pipe with the catted converters right? I have an 05 magnum/charger rt rwd
@edmondcarter9457 not sure if it will bolt up to the pre eagle versions.. but yes the matching midpipe will make it easier