THIS IS WHERE WE STOP DETAILING.
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2023
- WE DID NOT EXPECT THIS TODAY
youtube.com/@detailsauto?sub_c...
P&S ENVIROCLEAN- amzn.to/3WUYzoM
P&S SWIFT- amzn.to/43I98xI
CONSULTING LINE- clarity.fm/joelvalenzuela
PAID AFFILIATE LINKS SUPPORT THE CHANNEL - ยานยนต์และพาหนะ
![My Opinion of P&S Bead Maker [ Product Review ] #detailing #cardetailing](http://i.ytimg.com/vi/Qtr8GJqrMaw/mqdefault.jpg)
Enviro clean and swift? Wow! Always great to hear you guys out explaining steps! Thank you!
Thank you for watching Gilbert!
Kirk-Crank-land, I’m borrowing that forever 😂
Nice work brothers .👍🏻🇺🇸🇺🇸🇺🇸
I’d jump in with 2 spray bottles in each hand a bag of Kirk Franklin 🤣. You go Sal. Dwell and marinating is so key🫡👀
Coming in HOT!
Never floor the matt area unless your planning on removing the sills dryimg everything, now the vehicle has trapped water under the rubber floor full of wiring and it will corrode the floor and possibly cause electrical problems. Saves you laundry but causes the customer issues down the road.
Wow! Incredible results! What dilution ratio did you use for Enviro clean?
Always as directed
Clean work 👌🏽.
Thank you for watching 3M
That's gross I would never let my car get that bed I love keeping my car cleaned and washed
Yeah it was gross
I find that when I do trucks with this flooring a drill brush and brake buster or simple green works great
Yes drill brushing can cut the time down substantially
Was the Enviro Clean diluted at all gentlemen? Also does it have foaming capabilities? Just curious . I’m always happy to see you both and the knowledge bombs you give us.
Yes, we always dilute it according to task at hand. It does have foaming capabilities but nothing crazy.
@@detailsauto I appreciate you Joel🤜🏾
I would have pre sprayed the whole inside with degreaser and then pressure washed it down following by vacuum and wipe down with protectant!!!
Yeah doing work trucks is never worth it to me. I decline everytime. Way more work than it's worth and you never get the exterior washed to a point where the water runs clean. Lol next one
So are you guys diluting the enviro clean. Nice footage by the water
Yes always dilute accordingly
Try out magic eraser on these types of interiors 🤮 quick work
Works on some materials but I would use caution because other materials you can't use it. Too abrasive. Try this on a MK4 Volkswagen, and you have ruined the customers interior because everything has a rubber coating that peels off if you hit it with anything more abrasive than microfiber.
Man this was definitely a banger took a lot from they. Also I must say the beginning of the video had me with a thizz face getting hyphy lol
😆 🤣 😂
How much would you charge for something like this
For our level of work it's expensive
I did a truck similar one time on construction a ford truck learned one thing you don’t wanna do is spray water like u did inside the panels on bottom floor.they have wires in there and the water will go in there with enough water it will flood in there and short circuit it and cause damage to vehicle so always be careful it has be very light spraying or just by hand is better if not it will cost u more to fix it . Having over 25 years in experience detailing
We sprayed the plastic edges
This is a work truck I see personal trucks that bad
Yikes
You recommend using degreaser on interior??
On this one of course, this is a very mild degreaser with a wide range of uses, gentle enough for fabrics even when diluted correctly.
We recommend using degreaser on the interior when degreaser is needed.
@@salfromdetails9876 since there is usually is no grease in interiors, why not APC, just curious that’s all that you Sal
Hey Mike. You most certainly can use APC. For this vehicle, in its environment, and what it's used for, and based on our pre inspections, we knew which line up of chemicals were necessary to achieve maximum results.
@@salfromdetails9876 We reach for what experience tells us. Pre plan and execution is never touched upon, frankly because most don't consider it. This saves us the most time in a detail, efficient quality work is our goal. Sal broke it down on this one.
4:45 Be careful how you caress that blinker knob it’s lookin a lil sus. Just sayin’
SMH
@@detailsauto haha the end result was clean. Great work guys
Such a great way to attack vehicles in this condition. Great video as always. 👍🏽
Thank you Brandon
I’m guessing this is one of those farm vehicles?
This was a water truck for construction use, but they also are farmers so they have lots of equipment.
@@detailsauto yeah I saw one semi loaded with hay for the cows👍
Perfect video for my thoughts right now. Several weeks back I was awarded a supervisorial role with 10+ years experience at this company. Every night I bring our work truck in I am so disgusted with the interior space because it has never been cleaned since it was bought about three years ago. I'm about to talk with the owner about maybe giving this truck a detail because it is full of dust. The main goals are to make the driving cab livable, give the exterior some basic spray on protection and some beadmaker treatment to the windows plus I would probably do a quick work of some synthetic clay to clean up the paint surface as well. I guess my question is, should I book this for three hours or four? I'm not expecting perfection and I probably won't be using a steamer either. Sheesh I though maybe just some ONR to break down the dirt but you guys went right in with Envrioclean!
I would go with 4
Sal you called the Kirkland towels Just Kirk Franklin 🤣😆 LMAO. Man you are just innovative and hilarious 👍. I know you have Joel chuckling all day brotha👌. Hey thanks for showing us grimy work because it shows us how to tackle them👍
We are always having a good time at work. Thank you for always keepin us chucklin
First!!!
Once again going to work. 🔥Really appreciate you guys's videos They come in helpful learn a lot from you guys 💯🫡
Thanks for watching and we are happy to help.