CYA, had to modify it a little to fit the sight, but no big deal. Here’s a link www.amazon.com/CYA-Supply-Co-Springfield-Micro-Compact/dp/B081TGMQR4/ref=mp_s_a_1_1_sspa?dchild=1&keywords=cya+hellcat+holster&qid=1623268217&sprefix=cya+hell&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExT0s5UFUyVkVGTUdZJmVuY3J5cHRlZElkPUEwMDc5MTU3MzVGNjQ5Wk9SVjZCRCZlbmNyeXB0ZWRBZElkPUEwOTY1NTI4WEJSSVJNWVlOSlZDJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Had to work a little harder on recoil control with the micro compacts, was running some 115gr federal ammo witch is snappier than the heavy’s, but once you can control it, it makes running a full size a dream!
You can see the irons with the sight on your slide, so if your battery goes down or something else was to happen to the sight, you will be able to use your irons.
So, I bought the Romeo Zero but I don't have a vise or micrometer or dremel. Can I order the correct screws? If so, who would sell them and what screw size/number would I need?
How much exactly shorter do I need I’m confused to be honest sorry. I stuck the m4s on my optics ready fde hellcat with the zero elite and it seems to snap in fine and there’s only about 3 threads on the bolt so I’m not sure how much I have to cut off the bolt
@@johnnyninetytwo did it really come with the correct screws for the OSP FDE Hellcat or did you end up buying the screws?? Considering getting the Romeo. Thanks!
@@metsnyc7797 they did I ordered it through optics planet , I believe since this is the second version of the sight they started including the correct screws for it. Trust me they’re in there and if you want the part number lmk
This one is the 3moa. I will always go with the smallest size, it gives you a better, more precise aim point for farther shots. You can always increase the brightness to give you a bigger, faster sight accusation for close quarters. Thanks for watching
With the issues the first 365’s had, I went with the hellcat. That and I preferred how the hellcat fit my hands, just personal preference, nothing against the Sig
![[EP.01] ดูฟรีตอนแรก LOL: Last One Laughing Thailand Thailand หัวเราะทีหลังปังกว่า | Prime Thailand](http://i.ytimg.com/vi/t4KunBRKn3s/mqdefault.jpg)
Thanks for the vid, It helped me to decide to buy one.
Helluva shot!!! 👍
I try man, thanks
Good shooting brother👍. Subscribed
Thanks man!!
What holster are you using? I’m looking into the Romeo myself.
CYA, had to modify it a little to fit the sight, but no big deal. Here’s a link
www.amazon.com/CYA-Supply-Co-Springfield-Micro-Compact/dp/B081TGMQR4/ref=mp_s_a_1_1_sspa?dchild=1&keywords=cya+hellcat+holster&qid=1623268217&sprefix=cya+hell&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExT0s5UFUyVkVGTUdZJmVuY3J5cHRlZElkPUEwMDc5MTU3MzVGNjQ5Wk9SVjZCRCZlbmNyeXB0ZWRBZElkPUEwOTY1NTI4WEJSSVJNWVlOSlZDJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Good shooting! Recoil doesn’t look too snappy from your vid.
Had to work a little harder on recoil control with the micro compacts, was running some 115gr federal ammo witch is snappier than the heavy’s, but once you can control it, it makes running a full size a dream!
How did you get the front of the sight to not be loose?
What you have for a OWB holster for your hellcat?
how well do the iron sights co-witness?
You can see the irons with the sight on your slide, so if your battery goes down or something else was to happen to the sight, you will be able to use your irons.
What grip is that on the handle? Looks like It'd make my Hellcat way more comfortable.
I used a Hogue Glock 43 sleeve, fits good.
@@wyominghighdesertprecision Thank you, gonna get one.
So did u like it better? I'm trying to decide if I should just spend the money and get this red dot
I like the sight, battery life hangs in there for almost 6 months on EDC, no issues holding zero, it’s a good choice for the money.
@@wyominghighdesertprecision I'm going to get it. I don't think it will drop more than 160
@@laoutdoors2039 I lucked up on Black Friday and got it at Academy for $99 shipped.
So, I bought the Romeo Zero but I don't have a vise or micrometer or dremel. Can I order the correct screws? If so, who would sell them and what screw size/number would I need?
You could take your package of M4’s to a hardware store and match up some shorter ones.
How much exactly shorter do I need I’m confused to be honest sorry. I stuck the m4s on my optics ready fde hellcat with the zero elite and it seems to snap in fine and there’s only about 3 threads on the bolt so I’m not sure how much I have to cut off the bolt
@@wyominghighdesertprecision actually never mind they actually come with the correct screws for the osp ready hellcat
@@johnnyninetytwo did it really come with the correct screws for the OSP FDE Hellcat or did you end up buying the screws?? Considering getting the Romeo. Thanks!
@@metsnyc7797 they did I ordered it through optics planet , I believe since this is the second version of the sight they started including the correct screws for it. Trust me they’re in there and if you want the part number lmk
I like sleeve where did you get it
It’s a Hogue sleeve for a Glock 43, fits good here’s a link
www.midwayusa.com/product/1019609241?pid=931633
Which MOA did you go with?
This one is the 3moa. I will always go with the smallest size, it gives you a better, more precise aim point for farther shots. You can always increase the brightness to give you a bigger, faster sight accusation for close quarters. Thanks for watching
Why not just buy the p365x ?
With the issues the first 365’s had, I went with the hellcat. That and I preferred how the hellcat fit my hands, just personal preference, nothing against the Sig