Impeller Installation | Lower Base Plate removal | Lower Unit Water Pump | Mercury Outboard
ฝัง
- เผยแพร่เมื่อ 11 ม.ค. 2021
- Impeller installation for 2002 Mercury Outboard two stroke 150 CC
Lower unit water pump
Base plate part number is 8M0077147 about $30.00
Link for Base Plate
amzn.to/3JpqQhz
Impeller Kit
amzn.to/3r6DiMK
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
Great job! I must say this is one of the better DIY impeller replacement video's out there with one exception. NEVER put grease on the top of the out-drive shaft, rather remove the old grease from the splines and replace then wipe the top removing any grease there. Grease on the top of the spline can cause hydraulic lock making it very difficult to fit the lower unit to the upper snugly. People do this then use the torque of the bolts to mate the two. This causes a pressure on the lower gears and upper unit that can cause costly issues.
I love that you didn't cut too much in the video and left most steps, it helps a lot!
MashaAllah, Farhad Bhai, You have explained everything so well, that I have no Knowledge of any tools and boats, etc, but it seems I can also do it
Great video. Best tip. Keep in forward drive. No one else mentions that
Awesome video...thanks for sharing 👏
lk 6
nice vlog man ⭐️⭐️ ... keep going on and up 👍🏼👍🏼 watching u from kuwait 😃
I see U have a Proline Walk I'm pretty sure U said it a 2002..with a 150hp Optimax Saltwater.. l have a 2001 Proline Walk 150hp optimax saltwater as well. I don't have a painted hull though, I live in SW Mich. I never got to ocean as was hoping to. I was in bad motorcycle accident in 2007 have only been out a few times ea year. I had surgery on my Back this May so today is 1st time its been out of my shop since Aug 2022. I remember only changing impeller 1 time and it still didn't work. I order parts from dealer I purchased boat from. So I took it to them to work on it after I tried, I remember them telling me it was because the bottom part of pump & seal was bad just like you showed. I bought the impeller kit from a different place this time. But after I watched this video I will order the lower part of pump & seal kit as well. If I am going to take it apart going to do it all. I see U made this video 2yrs ago so don't know if U are still looking back at this time or not. But expect for a few small things that others said already like the small water hose that I think is around the shifter rod, the grease on the top of shaft should be only on groves. It can make it hard to put lower unit back together as grease could make a airlock if on top instead of spines. Thanks for a good video you show everything very well gives me idea how the process is done. Im not sure if there is specific torque on nuts or not but most things do. I am very surprised that in 22yrs I only have had to change it 1 time. I think I have 380hrs on the boat & motor not many for its age. I am the 1st owner of it bought it new, it has been parked inside every day except for a 2wk period about 7yrs ago.
Great idea .impressive share. Wish you have lovely time my dear greetings 🙏👍
wow.....difficult job u have done ur own we learnt a much.
I just bought a procraft 1995 v180b witj a 135 mercury and first ride on water it stopped peeing then started then stopped so im gonna put a new water pump in thanks for the video
Very good video. Thanks.
Better day...nice blue skies
Nice video very instructional
Helps when you put drive shaft in right hole 😂. Nicely done anyway 👍
Привет интересно было смотреть Огромный лайк от друга Молодец 👍✊
Well done sir
Best video so far on this.. but one thing confuses me I did mine today and when putting the lower unit back on the copper water tube coming down to the pump that connects to the plastic tube is not a tight seal at all! Is this normal? Seems like you would want some kind of seal there but maybe I’m wrong.. I did not notice anything fall out when taking it apart.
very good
Question, when you put in the water tube it does not have any gaskets or seals? It just stays in place like that?