How to Replace Front CV Axle Seals 07-14 Toyota FJ Cruiser
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2019
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/84/ax/axles-and-axle...
In the video, 1A Auto shows how to remove and replace a broken, rusted, or leaking CV axle seal. The video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, Toyota FJ Cruiser.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ozZ/1AXAA00013
• Pocket Screwdriver
• Pry Bar 1aau.to/oca/1AXAA00020
• 24mm Wrench
• 12mm Socket 1aau.to/ouY/1AXAA00015
• 17mm Socket 1aau.to/ouY/1AXAA00015
• 18mm Socket 1aau.to/ofP/1AXAA00043
• 19mm Socket 1aau.to/ofP/1AXAA00043
• 21mm Socket 1aau.to/ofP/1AXAA00043
• 36mm Socket 1aau.to/ok/1AAST00006
• Brake Caliper Hanger 1aau.to/om/1AXAA00084
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/ode/1AXAA00078
• Ratchet 1aau.to/oz6/1AXAA00016
• Socket Extensions 1aau.to/ouY/1AXAA00015
• Torque Wrench 1aau.to/ohI/1AXAA00044
• RTV
• Silicone Paste
• Floor Jack 1aau.to/ogx/1AXAA00068
• Hammer 1aau.to/odN/1AXAA00091
• Jack Stands 1aau.to/ogA/1AXAA00065
For More Info visit us at 1aau.to/h/bKp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
These are the best maintenance videos on the web. Well done. This would have to be the most mechanically sound FJ on the planet with all the maintenance!
+Mozimage Photography Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
That ball peen hammer seal tapping trick saved me on an 02 grand prix. Thanks for that
You can loosen/tighten the axle nut once the rotors and calipers are on by blocking the rotor through the vents with a screwdriver....
Great job, one of, if not the best, maintenance video in any category - nice, fluid narration with all the spec and tips. Thank you!
This site is amazing! Great tips and always very happy with the parts I buy from them... Thanks for putting this together!!!
+Brian Tredway Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video the only thing I recommend is to just undo the two lower bolts on the lower ball joint and the steering tie rod
+stites outdoors Thanks for checking us out. 1aauto.com
@@1AAuto definitely the best video on the subject on TH-cam
+stites outdoors Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
You don’t seem to carry these seals - How come? Great videos by the way, but I wish you carried the actual part
That is not how you install an axle seal my guy. Jesus
Thanks for the video. I might take the skid plate off before I take the seal out tho lol. These videos are one of the many reasons we shop on 1a. I haven't had one problem yet and we have gotten alot of parts there from lower control arms to rear springs. Great parts supplier!
This is the only film on youtube on how to install the seal in the knuckle! Thank you also for the advise w/silicon pasta, but I can't understand how it can keep the spring rings fm falling out, it is just pasta. I forgot to put it on before the installation of the seal. Should I put it on still? Does it prevent from moisture? Thank you for a great film.
+Olena Erhardt Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
The next person that try's to take that dust cap off is going to curse you big time
Such helpful videos. thank you!!!
Wow the corrosion on that FJ. Has to be a rig that spent its life in the East.
Was this FJ one purchased just for demonstration purposes? I see it used in a lot of FJ Videos..
What is the diameter area your tapping on those seals? Isn't there a seal driver for this?
Is it necessary to replace the seal if only the spring in it has come loose? I went to install my cv axle and saw the seal spring hanging loose.
PVC pipe coupling works great to push that differential oil seal and the spindle seals. I forgot the sizes
where can i buy just the seal? like you show in the video cant find it anywhere in your website
+Alexander S We do not currently carry these parts on our website.
Nice Video, could you let me know the part# of the seals, Thank you
+Francisco Reyes We currently do not carry the axle seals. Try searching www.partsgeek.com or eBay Motors. Thanks for checking us out!
This guy used punch on every rubber seal he came across lol. How about run to home depot and pick up a few 2 feet long, 2” & 3” OD pvc pipe and keep them in your toolbox. This is why i do all maintenance and repair on my own vehicles.
Where can I can the seal that is located behind the knuckle that you are installing at the 17:00 minute mark
+George Parra You can pick one up at any local auto parts store.
Are those fluids, transmission or gear oil?!
Gear oil from the front differential. Just refill it with a synthetic 75W-90.
👍🏻👍🏻
+Fausto Canales Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Jesus, I'm not one to leave negative comments much but find a less blunt object to take that cap off and if you need to put a bar on the studs put lug nuts on first so you don't ruin the threads. Axle nut is 35mm on stock axle.
That cotter pin looks like it came from a tuna can
Putting the vehicle in 4 Low also would help you torque the main CV axle nut
Curious about this. How would that help?
Can't you just swing the knuckle away instead of taking it completely off?
Has this guy not ever heard drivers? They aren't that expensive, and watching him trying to set the seals with a punch makes me cringe.
all them new parts and never put a new OEM $ 20 backing plate on (dust shield) , come on now , old one is almost tin foil
This is most definitely NOT the correct way to do this job on the slightest, nor does he even know the part #’s of what he’s puting back in to answer the replies to his videos when their in his frigging hand!! Unbelievable!! Do not do it this way or you’ll be sorry. So many other clear videos on here of how to do this the correct NON INBRED way. Unbelievable. Smh 🤦
100% agree, I was able to use a large socket that fit over the seal and I was able to tap it in that way (after adding a little bit of oil to lube it up), being a repair shop he should have access to multiple sized sockets that would have worked
Are your parents cousins?
🤣
This is an awful video with poor instructions. That’s not how you should install the steering knuckle seal or the diff seal and he does a ton of steps out of order. There are other videos showing a far easier install and removal process than this one. Please go watch those.