ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2024
- Check out the 4UATTRO SHOP for official merch!
4uattro-shop.myspreadshop.com
/ 4uattros4
Today we are installing the JXB DriveShaft Carrier Upgrade for the B5 S4.
This is a must for almost all of our cars being that these carriers have seen 20 years of service as well as thousands of miles and for some some very harsh temperature changes. This new carrier will eliminate the old carriers weaknesses, all with a simple install that doesn’t even require removing the drive shaft.
This carrier upgrade is available for almost all Audi Torsten base Quattro chasis.
B5 S4 Carrier:
www.jxbperformance.com/produc...
All other Carriers:
www.jxbperformance.com/produc...
Main Shop:
www.jxbperformance.com
#JXBPerformance #driveshaft #b5s4 - ยานยนต์และพาหนะ
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
Okay got mine installed with street bushings, and test drove my B5 A4 Avant on it with stock exhaust. I don't really detect any NVH, and honestly feels like there's less of it now due to how old and crusty my old carrier was. The first to second wrestle match is very minimal now (though my transmission is probably just super worn out at 256k miles), like he said the knocking in the back from on/off throttle is gone, and haven't heard very many noises going 90 MPH. I had extreme anxiety about cutting a piece of a ~$2000 part, but if you torque to spec and use thread lock (Please for the love of god use thread lock), it feels like a great upgrade. Maybe at some point there will be replacement bushings for sale if they wear out.
Also, I'll state it again, PLEASE take off the two 13 mm bolts holding the old carrier first before chopping up the old one. You'll want to make sure they'll come out, and it will help determine if your bearing is rotating with no resistance or if it binds up. I doubt this mount will help with a bearing that's about to seize up so please check those first before cutting.
Glad you like it and install went well!
Instablaster.
You and Justin Ballou, the best S4 content on TH-cam.
Thanks man! Justin’s a legend.
Great Great Great UPGRADE, Received and installed it today, My bearing was fine, It was the housing and rubber support that holds the bearing that was worn out, I could not get the Support anywhere, The part that was suppose to go on the Car, Dodge wants to sell you a complete new Driveshaft, NOT ONE, NONE , No part house anywhere within 500 miles of me had the bearing and support for a 2016 Challenger R/T Purchased this, Installed this, Without taking Drive shaft out, Its smoother than its been for last 5 months, No Noise at all, I purchased street version, I do not run the car hard, Excellevt part and design , Better than original really !!!!!!!!!!
Best upgrade I’ve done in a long time. Great video, too!
It really is!
JBX give this man a promo code.... Most people that still have these have multiple audis...... I need 3 😵 so yea.......
lolol thanks man!!
Great Job! Excellent video! I came here chasing the JBX install for a BMW e92 and luckily landed on your site… what an excellent treasure trove of content! Thanks for laying out the product and cool cameras at the end for comparison!
This is the best video which I found in the network. Thank you very much my friend. :)
Great content. Just got my s4 so stage 2 and it impressed me a lot with the performance you get out of just downpipes exhaust and tune. I’ll definitely add this part too my list of things to do to my b5 s4!
Congrats on the new S4! and yeah man these cars have a crazy amount of potential
You out here killing these videos 🔥🔥keep up the excellent work!!
Thanks man!!
Can't wait to order mine, thanks for the great tutorial!
You got it man! Good luck with install.
I'm only a minute in and already liked and subscribed (rarely bother subbing) quick, clear, concise 🤙
Appreciate the resolution and good reviews and keep them coming!
If you could do post and pre videos snips of you driving with and without so we can hear & see the potential difference (if caught on camera) meaning in cabin noises it would be great! Sometimes to see your first reaction helps understand how great a difference it is can be a win!
Will do!
Thanks for the knowledge.
Can't wait to get my Allroad back Friday.... Had this done along with a ton of other stuff.
Makes a huge difference man!
Crazy how I just heard about this product a week ago as my bearing housing did have the rubber broken apart and making the rubbing and kluncking noise. I kept thinking it was a hub bearing and it was not, I replaced with this JXB upgrade and it did fix the issue but at speed of 55mph or more the knocking seems to come back just a little and I feel the drive shaft like if it was unbalanced. Plan on upgrading to the stiffer track bushing and make sure the shaft is completely aligned center I think I may have missed that part and your video reminded me. At least for now my driving is mostly city and 45mph or less. Good video....
darwin is a huge support to the b5 community, id love to go to their b5freaks meets
Thank you!!
Amazing video just goes to show what's out there in terms of solutions fot these older Audi's
Thanks! And yeah luckily we have good aftermarket support
Love your videos , can't wait to throw all of these parts on my Santorin blue b5
Glad you like them! Best of luck with the Santorin
Ordered miune today, Hoping to get it tomorrow and get it installed on a Challenger R/T , I will let you know how it goes, Thanks for video, Very explanatory !!!!!
Welcome! Happy to hear it was helpful!
JXB was showing off the one for the C5 in the allroad group im in. I'm definitely getting it when mine starts having issues.
Definitely recommend it.
Nice install. Came across this carrier a few weeks ago on FB. If I hadnt already purchased the 034 upgrade, Id be buying this one right now.
034 one is great but man is it a pain to install !
@@CIPGAS I thought the same thing. Was just watching another video because Ive been stuck for a week trying to get the 2 shafts apart.
@its_dewayne yeah I’ve done a few before and I hate that job so much
Nice job!
Thanks!
Oh boy i hope mine is OK im getting my exhaust fixed tomorrow so this video is super helpful when they put it on the lift so i can check this quick. I didn't know these were common to fail when old.
Definitely check it out man. Just try to move the shaft and see how it goes.
@@CIPGAS will do 👍
hey man I like your content keep going :)
Thanks, will do!
One thing I want to point out on the video. You mentioned to cut the bearing before unbolting the two bolts on the old carrier. I would definitely loosen both before cutting to make sure those bolts won't give someone issues like snapping or being super rusted up. Tighten them back up when you're ready to cut, but it would suck to cut that carrier and something with those bolts doesn't go the way you want it to.
Makes a lot of sense man. Definitely a good idea to back them out first to make sure they do come out before continuing the rest of the install
@@CIPGAS I'm actually checking up on how bad mine is on my B5. Got some practice with the angle grinder on rusty exhaust clamps. Mine is full of cracks and seems so old it hardened up into a track mount lol.
@@_brushie Lmao it hardened into an upgraded mount!
Definitely my next project. Great content!
Awesome! Thank you!
Great content! The lighting on your videos could be a bit better, but excellent content regardless.
Good video
Thanks
Hey great content! I was wondering if there's a huge difference between the street and track stiffness being stage 2 im wondering if the street will wear out quicker with excess vibration more power than stock and all that, or if it'll hold up just as long as the track. keep it up love the videos!!
Thank you! I’m my opinion the track and street bushing will both last you a very long time. I’ve also run both and recommend that everyone run the street bushing unless you’re completely devoted to drivetrain stiffness and response. You will definitely get vibrations from the track mount.
This was soo satisfying to watch...lol. Will be talking this very soon. Good work. 👍
Glad you enjoyed it!
034 has one as well but this looks nicer
Yeah this is a much easier install too
Great Vid, it made me want one.. did they give you a discount code to give out??
Thank you, and sadly I didn’t have a discount code
Personally I can only see this as an upgrade if your habit is to launch almost daily - it could help there...
But I believe the bushing is intended to pick up on the vibrations, instead of transmitting them into the cabin. Plus - does JXB warranty the life of the OEM bearing will stay the same? My guess is that bearing will fail sooner with the rigid setup. When that happens....
I need to do this on my 2001 audi a6 c5. I am wondering if you have had any problems as of date after the install?
Thank you
Peter
Do they make one for a jeep cherokee?
I just get rid of my rear humming noise. After 3 rear wheel bearing changes in 90k mi, last one only lasted 10k. I changed the uprights. Silence.... for now. Hooe it stays that way. Not sure why my bearings cwere going bad. Ideas?
But, while under there i saw center mount was tired. Back in 13' i separated my stock DS in my b5 a4. Just to find u joints were going bad. I bit the bullet and bought a DDS DS. Just a grand back then, 1300 now, lol. U might have more experience with b5 s4 then me, though i do repair all probs with this car on past 10 yrs. So every few months some repairing, 😂 . At 213k mi. Should one get a new DS or just get this? I mean how long can these center bearings last? The time is coming shortly that my girl will have to make that 10 to 15 thousand dollar question. I do feel that clunk your talking about too.
Ill go back to your body work vid to ask questions there about under sude skirt damage. Thanks
So those bushings they supply get rid of the spacers then or do you still use the spacers??
Yes they replace all of the current hardware.
Good content👍🏻sadly they do not ship to switzerland🤷🏻♂️
Well that sucks!
Hey we absolutely ship to Switzerland! Unfortunately there’s not a “ship to all countries” button for me to click, so I have to do it one by one manually. Sometimes I miss some important countries! I’ll get it added to the site.
@@JXBPerformance I ordered one for my RS4b5 to an adress in Germany, but I also have a Audi S4 b5 for dayli drive wich I consider to replace, if I am happy with the one I am looking forward to install first on my RS4. By what date you have updated your website,so I can order to switzerland?
Installed this on my 5.7 and it’s now giving off a massive clunking noise.. what did I do wrong
Do they have the ones for stud base C5? mines don't have a bolt to mount the carrier it has 2 studs the hold it on with 2 nuts
Not sure but check out their site. They have a big selection www.jxbperformance.com/products?category=Driveshaft%20Carrier
My car having the same issue I guess. I own 2017 dodge charger. When I accelerate my vehicle it makes a knocking noise and little viberation. Just wondering if that would work for my vehicle. I went to dealership they asked me to replace whole drive shaft which will cost around 2800 CAD including labour.
Give it a look and see if the rubber is ripped in the bearing bushing. www.jxbperformance.com/products/p/ld-facelift-dodge-charger/challenger-and-chrysler-300-driveshaft-center-support-bearing-carrier-upgrade
Is this a vast improvement over a new standard bearing? Realise it’s easier to fit but is it an upgrade?
It is definitely an upgrade when going with the stiffer bushings. The driveshaft movement is reduced when compared to a brand new OEM carrier. But that does introduce some NVH into the cabin. The softer of the two bushings is pretty much on par with a new OEM carrier when it come to feel and movement.
@@CIPGAS thanks! Just trying to weigh up the cost of the upgrade parts and quick install vs the cheap OEM bush and the bigger job to fit
Hi, was there a cause for your update?
Maybe vibrations or something else?
I upgraded because I saw the condition of my carrier. It wasn’t vibrating yet but it was starting to tear.
You think I should do this regardless of whether or not I hear anything? Preventative maintenance, I suppose.
I honestly think you should. Good preventative maintenance and will help with shifter and throttle feel
@@CIPGAS I’m sold. Thanks!! ☺️
How long have you had these on now?
1 week now.
U got a link mate for this ?
Link is in the description
www.jxbperformance.com/products/b5-s4-driveshaft-center-support-bearing-carrier-upgrade
@@CIPGAS thank you sir and keep the videos up 💥💥😎
Yoo