Cobb Stage 2 Plus Dyno Tune: 2015 Subaru WRX | 330HP/354TQ
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Short video of my dyno Protune at Cobb Tuning Surgeline in Portland, Oregon on my 2015 Subaru WRX. For those who watched the video or reads this description, the dyno numbers will be revealed in a future giveaway video! Guess my final numbers for a chance to win. Prize TBD.
How's the engine holding up after two years on this much power? Asking for a friend.
Good video man glad too see your not stopping with the mods on this car and your trying stuff and posting about it.
1000HP, and 2,000TQ.
+Cali_WRX YUP!
Not to be a hater but was this a high reading dyno? The mustang dyno that we use by us stage 2 FA20 wrx's tend to make between 270-300whp and 290-320wtq? Again not hating just genuinely curious, gorgeous car either way!
Such a hater!
Mustang dynos usually give lower numbers.
Dude!! It sounded insane on the dyno!!! Very nice!! My guess is 305hp / 338wtq !! :D
I'm gonna say 322whp 345wtq. Was this tune just for the process west verticooler or was there other parts?
Love the way your car looks! Did you end up going with sport springs? Coilovers or did the wheels and tire combo you use just make it look lower? Thanks for the feedback
In this video, I was on RCE Yellow springs. I'm on Prime suspension coilovers now.
well 330 whp is a nice output with simple bolt on mods. Stock is around 223 whp (268hp*85%=~223 whp) so its over a 100 whp increase. I wanna get a 2018 or the 2019 when it comes out but 268 bhp always felt like it wasnt that much and i never found decent results for stage 1 and stage 2 dyno readings but if you managed 330 whp at the dyno and 354 wtq I will be very pleased to purchase and mod/tune the car. 330 whp is serious power.
If you ever go flex fuel, that's where the power is at. :)
Awesome! Just wondered how the engine has lasted with this torque ?
I'm going to say 315 HP and 364 TQ.
Props on noticing the Pulsar! Love those cars.
Well do you still have the car?? How did it hold up
332whp - 351tq
Numbers are just numbers. There's no regulations as to how shops calibrate their dynamometer. It's about gains and how the car drives to how you want to.
347whp 338wtq cars killer, my inspiration build !!
Hey man, what all mods do you have when you pushed 330? Was it only stage 2?
Was that a trunk swap or did you buy it aftermarket? And what headlights are those? Thanks
Trunk swap.
Is it just me, or is your Morimoto C light not in the C light housing properly (at the end of your video in the garage). It looks like it's stuck to the outside of your c light reflector. Anyway, great car, great vids, keep it up!
hey dude I plan on buying an accessport for my wrx 2016 Im now stock... Everybody talk about about a lot of tune... what do you suggest for 2016 ? I want something very powerful but safe for my car... I live in canada.. thanks!
+WRX_420 Buy an access port and find a reputable tuner that has done 2015-up WRX's.
How did you get oil temp to come up in your triple meter? My 2015 sti launch doesn’t have that option.
STI's do not have that an oil temp option.
Dyno numbers are in the title!
sweet car - she flys! love it
based on your mods I'm going to say 358 wtq 328whp. Not sure what type of fuel your running but my mods are similar to your. Hope I'm close!
Those wrx make serious power with stage 2! I know you have at least 335hp 325torque
LANCARU!! Damn man, those new body styles look like EVO's... I will stick to my 2011 stage II +. None the less sweet ride.
My guess is 330 whp, 354 torque. What do I win?
Im on a stage 1 right now ( Cobb j-pipe, invida TBE, TVG Deletes) 270 hp 295 TQ , Scheduled for a new 91 /E85 stage 2 protune ( Installing CAI AEM, West Process Verticooler, Grimspeed 3 port boost controller, and GFB BV) Kinda worried about the connecting rods, read anything over 350TQ on the FA20DIT they fail. I will be happy with 330HP 340TQ. Have you all heard of the rod issues?
You can tell how old this was, FA20s can hold way more than 350whp. Especially 18+ with type RA block. Lots of 450hp VaS running around
304WHP & 362WTQ - My Guess
325 WHP 340TQ
Have you always had the Cobb tune or have you tried Torqued Performance or Brent Tuning?
+shawnriv9 I've had Cobb and Bren Tuning.
***** No map. I just drove it there carefully. Kept it out of boost.
***** You should get good numbers as long as you have a reputable tuner. Keep me posted!
***** No real knocks here. Just the usual -1.41 to -2,8. Dam stays at Zero even at the track and autocross. I would take to your tuner asap.
Why are people guessing the numbers? It's written in the title to the video 🤣🤣
Why's your check engine light on? Is it because you went stage 2? I'm thinking about going stage 1 or 2 and I want to know if Cobb worth it.
EGR delete code needed to be turned off. It was taken care of during the tune.
+My WRX Channel oh ok cool. Thanks man for getting back to me.
Does the EGR CEL cause performance issues or just the annoying light being on? Meaning I can drive it safely to a tuner. Thanks
I say 309hp and 328tq, assuming on pump 93 octane.
290WHP 312 WTQ
did you have a stock top mount or was it upgraded
316 whp, 339 wtq
302whp-315wtg
325 whp, 340 wtq
325 HP/ 340 TQ
have you had any other tuner ? . do you recommend the cobb protune or any e tuning
Protune all the way. Even Bren Tuning says there no replacement for a protune.
Alright thanks
328whp and 345tq
300WHP and 280torque
315whp/330tq
Wait you live in Portland?
They send you a map for that far drive?
327whp and 349 wtq
What is your wheels setup? size, offset and tires size.
18x9.5 +40 245/40/18
329whp - 342tq
Wheel brand, size and offset and tire size?
Faded off the dyno
334 whp and 347 wtp
What rims do you have? I really like those and want them for my STI
Enkei NT03. Size is 18x9.5.
Thank you!
357wtq and 327whp
my brotha has a 19 wrx with a stage 2 cobb somethinf he is running 350hp but he can run 400hp
not releasing numbers wtf
350whp 350tq
what all parts did you have on the car at the time?
Turbo-back exhaust, ETS Intake, Intercooler, EBCS, TGV Deletes
My WRX Channel did you or do you still have the stock clutch?
298whp 338 wtq
333hp / 347tq
330whp 350whtq
325 hp 351tq
323hp / 341Tq
315whp 327tq
317 whp 340tq
do. have the cobb intake?
311whp, 324tq
362whp / 356wtq ??
345hp 378tq
mod list?
What headlights are those? i like the color is it 5000k?
+McLovinPablo OLM LED bulbs from Subispeed.
+My WRX Channel is there a big difference between your bren etune and your protune?
Sunny Vang A vast difference. The protune feels much more responsive and faster.
dammit ugh lol!!!!! i just loaded a cobb's stage 1+ETS map on my car. and i already want more -______- not had any DAM or Knock issues! so that's good! Cobb Surgeline will be my next step.
Chase Farmer Go check them out. Great tunes by Chris! He's the man! Plan ahead because they get booked up.
331whp 365tq
322hp 360tq
335hp 360tq
330hp 350tq
324 whp, 346 tq
380/400
314hp 332tq
Nice
330hp in crank or wheels?
dyno =whp lol
maybe know how much in
engine hp?
380 engine
315whp 315tq
347 whp 353 tq
its a good car but the new engine for the wrx is not a EJ25 anymore should of got a 2011 or older or a really good and less expensive wrx and even a sti is still cheaper
i mean dont get me wrong but i would swap a EJ into it
+ricki josevski (Rickisgamertag) This WRX base model was only $26k. Previous generation used STI's and WRX's sell for more on the used market then I got mine for brand new.
+My WRX Channel serious shit thats expensive/still a good car the new wrx i would love to have one
i live in australia so we have the fully jdm imports but if your looking just example for a new wrx 2015 here there around 35.000 usd a 2006 wrx sti is around 13000 usd and a 2011 wrx sti is 24000 usd
ricki josevski Our market is a little different. Good condition, unmolested 2011-up STI's with 50k+ miles selling for 30-35 USD.
+My WRX Channel nah same 2011 wrx sti completely stock maybe besides wheels 34000 miles $23000 usd thats stock if only the us market was like the australian plus we dont have many car checks either
327whp/346wtq
294/280
320 who 337 tq
285/290
320hp
335 hp 347 tq
320 hp 315 tq