Elegoo Saturn 3 Ultra 12K Resin 3D Printer - ULTRA DETAILS!
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- 12K Resin 3D Printing with the new Elegoo Saturn 3 Ultra - First Look at this new printer that has Wifi & high speed printing support
Thanks to Elegoo for Sponsoring today's video!
Elegoo New Product Launch - bit.ly/ElegooJuneProductLaunch
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3Ultra
Saturn 3 12K $399 ➜ bit.ly/ElegooSaturn3
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
Mars 4 $259 ➜ bit.ly/ElegooMars4
Mars 4 Max $300 ➜ bit.ly/Mars4Max
Mars 4 DLP $500 ➜ bit.ly/Mars4DLP
MY PATREON / My Resin 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Files from Todays Video
Cyborg Bust by Fotis Mint ➜
/ fotismint
Minis & Oni Brute & Dragon by Loot Studios
lootstudios.com/
Minis by Arbiter Miniatures
www.myminifactory.com/object/...
Cable by Wicked3D
/ 3dwicked
Some links on this page are affiliate links that help out the channel
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
TH-cam ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #Deadpool #Elegoo - วิทยาศาสตร์และเทคโนโลยี
![บุกร้านไอศกรีม VJ วุ้นเส้น !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/g549nEhKZdc/mqdefault.jpg)
In the market for an upgrade and it's just perfect timing! Thanks for your amazing videos, like always!
When you get your hands on the high speed resin, I'd like you see you try it on one of your older printers as well to see if you can print just as fast without the new printer.
I believe they are only giving to reviewers so they get better results. They don't want you to know that your old printer is just as good. Only a theory but makes sense, time will tell. Of course, Jessy could just test it with standard resin and FEP. Anycubic is doing the same
thing. Anycubic is now selling high speed resin.
That statue of Cable looks so good! The shield effect is legit!
Thanks for the tip on the clear effect of the resin
So glad to see Elegoo go with the 4 bolt system on the build plate. I hope this is something they continue to do going forward
Auto levelling should have been a feature!
haha nice job on the intro showing all the printers in the same shot and then seamlessly reaching over to touch the Saturn 3 Ultra.
This thing seems incredible. I bought my Mars 3 in January, and I will be getting the Ultra (need a bigger one, for bigger minis) in December!
Love your content. You actually convinced me to pre order the Saturn 2. Love it and tomorrow I will pre order the Saturn 3 Ultra.
I just bought a mars 4 ultra and hate doing the screen clean function the most and your trick with using a support to pull it just made it 100x easier!
Mars 4!!!?
Hi jessy, what layer height did you use to print the miniatures? Did you use anti aliasing? Nice preview of the printer btw!
Picked one up on black Friday, can't wait to upgrade from my mars 3. Big difference.
Thanks for the amazing video as always. I was about to order my first ever printer and was leaning towards the Saturn 2. Thinking I might pre order the Saturn 3 Ultra now as the price difference isn't huge. I do have a question though. What comes in the box? Is it the same as the Saturn 2? with the filter ect?
Jeez. I'm remembering when the Saturn was a big deal at its launch starting at 499. HOw far we've come.
Also gotta agree with you on the bed screws. I hated how Elegoo did them before and when I got myself a Phrozen Mighty 4K I switched to them because they did that. It's nice not having to worry about the bed swiveling all over the place and being lined up with the vat.
hi....does the 12K have a pre-drilled hole for exhaust hook up on the back side of the hood like the 8K? If so is it the same size? Would be cool if I could just use the same adapter I have now on my 8K if I were to buy the 12K to replace it.
Really nice video. good! A question: what are the external measurements of the printer? Thank you
Would you suggest using a flex plate or not? I have been spoiled by them on my smaller printer.
Hi ! What are your setting to print that fast and what resin ? I always end up with at least 8h to 12h
Thank you Elegoo for including tempered glass screen protectors, like Creality does. Features like this can extend the use-life of the screen. With
Exactly, where the hell is the heated resin? People use these in unheated garages.
Nice editing my man!
Can we just use that film and that resin on our Saturn 2 and push the speeds a bit more on that? Could you try that out?
it looks so good! 😍
That's cool, faster, bigger printers. Thanks for the review on it. Add it to my wish list. Do you paint any of the things you print?
i've been hanging fire on a replacement for my original Saturn (really wanted another with network connection), and placed my pre-order for the Saturn 3 Ultra yesterday as soon as it went live - delivery will probably not be until August (UK) - so plenty of time for Chitubox to update with a profile, and for others to see what baseline settings work well with the various resins. so looking forward to the massive uplift in resolution from my original.
@Unclejessy When Does Elegoo offer also Auto Leveling with Resin Printers like Anycubic already started with?
10:37 HAHA! A Kriss Vector with a 16+ barrel, with a barrett style brake, chambered in 9mm, outfitted with a scope, RMR, and launcher! LOVE IT HAHAHA.
Have you found a great mixture of resins for figures? I plan to print some articulated figures. 😉👍
how do you reuse the suppoort pieces? is there another video on that?
Any plans for a Photon M5s vs Saturn 3 Ultra vid? 🤔
i like the design and the features, but I don't think its worth the higher price vs the m5s 399 pricetag / compairing the preorderdeals from both 12k machines. looking forward what phrozen has to offer
Hay Jesse, great video as always. Any news on a new Elegoo Jupiter for this year, or would that probably be next year ?
With the more stable Saturn 3 Ultra's build plate with 4 screws. Have you tested if it can be used on the saturn 2 and vanilla saturn 3 for those who are interested in retrofitting them with it?
I'm a bit bummed that Elegoo removed the Ethernet port from the Saturn 3. I tend to prefer stationary devices be hardwired since... well, they're not going anywhere anyway. Of course, there's nothing wrong with offering Wi-Fi too, but make it like a computer printer and simply allow for Ethernet with Wi-Fi fallback (if desired).
Both options would have been great
I agree.
Id be next to impossible for me to use Ethernet at my current locations. But for that option I might’ve completely redo my shop lol
Any idea if they are working on/planning a higher resolution version of the Jupiter? I would like a large-format resin machine, but not sold on 6k with that large of a build plate. Particularly considering the cost.
hey can you tell me which is better for you this one ultra or the anycubic M5s? thank you
Now that you've had hands on experience with the m5s and the Saturn 3 Ultra, do you find yourself preferring one over the other?
Made the jump from from creality to elagoo Saturn 8k. I just got it today and seem pretty pleased. I did want this one but couldn’t wait lol. I’ll probably get it in the near future.
do you know if it can print in the more flexible resin types like ABS-like and Tenacious?
also, I can't see it on chitubox. Does it need special slicing software?
what do you think about heated resin vats? I'm not huge into 3d printing, because I suck at it, haha. but I saw another video of a printer that had a heated vat and they thought it helped with having less fails...for some reason.
Hi Jessy. At 9:16, you mention using the left-over supports for the vat cleaning function. Can you elaborate? Love your channel! You have the best info on YT.
I made some super tiny chainmail (3mm outer diamiter rings but I've been testing with sub 2mm) that would be great to demonstrate high res printers with let me know if you want to try it!
I’d love more videos of this printer. Long time FDM, new to SLA… And $900+ is a huge hit for me right now.
Well, the ultra is only $499
Could I use the ACF film with fast resin on the Saturn 2 to speed up my prints
4:06 Warning: If it's the same as my Saturn 2 (and I'm sure it will be) those are NOT standard USB ports; they just use a USB connector, which Elegoo should not be doing. Those ports output 24V, whereas USB spec is 5V.
TL;DR: if you plug anything other than Elegoo air filters into those ports you will immediately fry whatever it is you plugged in.
Also are people locked into using the elgoo slicer?? Maybe somebody can clarify that issue!
@@metatechnologist For the resin printers, yes you are locked into using Chitubox. It sucks. But I do all my supports in PrusaSlicer then export the whole thing as an STL into Chitubox. That means you can just use it in a very minimal way to produce a file that the Saturn understands.
Hi what do you advise me for jewellery casting between this elegoo and anycubic m5s?
Hey I was just wondering do I have to lay out my UV's for a model that I want to 3D print? I am new to all of this and figure you might know.
Hi Jessy ! Do you know what vat tanks are compatible with 3 ultra?i would like to get a second one but here I don’t have the 3 ultra vat available. Also it seems to not be big enough. Any tips? Thanks
Hi, a question please, If I want to place the printer next to my pc in my office where I work all day long, would it be toxic to breathe the resin components while the printer is working?
thinking of getting this to print 1/12 scale weapons for action figures seems promising
I need to print small 1:400 scale objects (cars, planes, buildings) will this printer do a good job with that?
Read between the lines … it is impossible to detect any difference between 12k and 8k with the naked eye … I like how Uncle Jessie walked between the truth and his sponsorship by Elegoo… 08:10 True manipulator 👍🏻 Nice printer tho , auto leveling option is a huge plus .
It doesn't have auto leveling though?
Plus no comparison to anycubic m5s
Always talk in microns, the Mars 4 9K is 18 microns.
@@mathewschau9361 from what Ive seen the M5s has the worse printing quality of all the printers out there, I think Phrozens 8k wins.
hey man i just got one getting fails, what setting did you use for these
mine just come out as a blob, on the build plate and then some of them were sitting in the vat but it was just blobs
I've already booked the Anycubic M5S but I'm very attracted to this too.
M5s is solid as well! Congrats
@@UncleJessy we live in an age of wonders. The Saturn 4 is going to be fantastically awesome! (even assuming it's just the best of the M5S and Saturn 3)
@Uncle Jessy do you know the m5 (not m5s)? it's on sale rn
Do you have a non sponsored honest review. Or a direct comparison against the anycubic photon mono M5 which seems to have a very very similar spec sheet including Wi-Fi printing bill dimensions and 12 k resolution. I have been using the creality halot Plus for 4 months and loving it but randomly my touch screen stopped responding to touch input and so now it's a paperweight so I'm looking for a new one that is maybe a little higher resolution between $400 and $500 and this printer and the photon mono M5 are the two I'm debating, do you think this one is worth the $100 more
Hi Jessy! First... thank you for what you do!!! My wife bought me a Saturn 3 (not the Ultra) for Xmas. I'm having lots of support failures. The exposure times seem dialed in well with the Cones of Calibration device and I've always used slower lift speeds for this very reason. I have an Elegoo Mars 3 Pro and I've only had two failures with over 550 hours of printing. However, I keep getting support failures with the Saturn 3 even with tried and true lift speeds and heights... :( ANY RECOMMENDATIONS??? Help me Obi-Jessy... you're my only hope! ;)
Do you prefer this new elegoo Saturn 3 or the new anycubic 12k with auto leveling?
This one is cool but a little big for me and what I do. Will you be doing a review on the Mars 4 ultra?
Would anyone happen to know if a spacer or mod is necessary for installing a magnetic build plate on the saturn 3 ultra?
Try to use 3DMaterials SuperFast Resin in the meantime. This is probably what the Elegoo superfast resin will resemble. Great video, can't wait for more content from this printer.
Hello I bought a halot-mage pro 8k had 3 prints and one punctured the film I didn't realize it and it leaked and ruined my screen .screen is 199.00 you think I better off cutting my lose and buying the saturn 3 ultra or the saturn 4 ultra?
I wonder if the ACF film could be used with the regular Saturn 3 or the Saturn 2 for quicker release.
Don't really see a reason why it wouldn't
Nearly all the improvement comes from the high speed resin, which MAY need the ACF.
Just bought the Elegoo Saturn 8K a few days ago.. Would it be worth sending back and waiting out for the release of the Elegoo Saturn 3 Ultra 12K
Do you know if a 12k screen will be applied to the Jupiter line? Cheers, great video as always.
Uncle Jessy, did you hollow these or did you print them solid? Thnx for the review
can you make a comparison video about saturn 3 ultra printing speed vs saturn 2 (with acf release film on it)?
Hey bro, im starting to get interested in 3d printing. Any tips on which 3d printer model to buy? I dont mind it being around 500 bucks as long as the prints are gonna be detailed! They can be from the same company also. Is it hard to set them up? If i downloaded 3d models online and import them to the printer, im new to this so i dont know. Any tips would be great!
I'm glad they added the ball screw to the ultra.
The Anycubic M3 Premium has those. Good in theory at least.
Would you share the layer height, exposure time and lift speed that you used with the space grey 8k resin? I usually print minis at 0.03mm layer height, 1.6sec exposure and 40-60 mm/m lift speed, so it takes a long time but the prints are smooth.
.3 layer height is perfect for 29um resin.
Does the computer you send the file from need to be kept on whilst printing?
Would love to get some more insight into your slicer settings..
also what layer height did u print all those at?
What resin should I use with that printer? 405nm?
I'm confused. You said that it has USB for the air purifiers (which I have two of), but the website for Saturn said that this model has a built in air purifier. Did your review model not have one? I'd like to know more about it because I'm not a fan of those little filters. THey don't seem to do a great job on the smellier filaments.
How do you make the shots where the whole model comes out of the resin? Clearly they’re taller than the vat
would this improve parts' gap ??? if upgrade to this ??
Would it be possible for you to say which resin and how much resin and how much each model cost to make?
This really looks amazing, especially for the fast print speed. I really have to give resin printing a second chance, tried an elegoo mars 2 pro some time ago, but could not stand the resin stench in my workshop. Is there any resin that does not smell bad? And is the strength of the printed parts comparable to something like a games workshop miniature?
Different brands have different smells. Still wear an organic vapor mask just in case since resin fumes aren't healthy. ABS-like resin is what you're looking for to print miniatures
try sunlu abs like.
Anycubic water washable doesn't smell at all - it's my preferred resin of choice for that reason
Does the build plate from Saturn 3 fit to Saturn 2?)
Do you have any resin printing guides for beginners? Resin printing 101. I couldn’t find any in your playlists
wasn't gonna but i did... wifi and a metal frame is a nice new.
Hi! I’m new here 😊 just one question: if you have to print a large model how do you know if the resin in the tank is enough? And if it’s not enough how do you refill the tank? Do you stop the printer and refill the tank or do you add more resin spilling it directly in the tank? Thanks!
You have a marker on the tank on how much resin it can contain and before slicing the file you can check on your software how much resin it will take to print it. I wouldnt reccomend stoping the print for refiling the tank for any reason.
Hey Uncle Jessy I've been long time fan of your vids and you are the reason I bought a saturn 2 and now I'm angry and jealous because in the space of a year suddenly the saturn 3 is out with 12k 😂 are you able to share your resin settings for your saturn 2 as I've been having some time issues with mine and I had to increase the retract height and add some exposure time which made printing so much slower
hey been looking for a cheap 3d printers fir jewelry and i can across your videos i wonder if this ones prints stl files I'm not familiar with 3d printers so don't have any clue just asking serious question
Your videos are cool Good work, would you do a best settings video for this unit please that would be awesome!!
Need you to do a neptune 4 vs neptune 4 Pro. Looked online and couldn't see much differences
The 4 Pro has the interesting segmented bed, where for small models you only heat the center. The Pro is going to 2 months longer to ship to Australia which made my decision easier.
Thank for this video
My wifi is shit. Does it upload the entire gcode before printing or is it an ongoing connection?
Does the filter come with the Saturn 3?
Im more interested in that new Anycubic with the auto-leveling, my Saturn 2 does great, detailed mini printing, but I hate having to level it
Is it possible to transfer files through LAN?
hello
I do not understand it should be faster than the Anycubic m5s with 150km / h but in your tests the Anycubic seems faster for you who have tested both which is the fastest to print at equal print size ?
The speed of the print on both machines boils down to the new high speed resins both companies are coming out with. If you print on either machine with your standard resins, the prints aren't going to be any faster. Both machines are basically the same, but the Anycubic offers self-leveling and resin runout detection (debatably also failed print detection but apparently that doesn't actually work from what I've seen). I imagine if you used the high speed resins on your current printers, you could still get very fast prints.
saturn 3 ultra vs anycubic m5s, how do they handle the details?
Features: WiFi print status and notifications, Resin low notification and pause, integrated camera, clear front edge of vat for easy viewing of early stage success/fail, cleaner vat drain.
so now need to do a side by side of this one and the anycubic M5s, trying to decide what would be the better buy. Bigger build volume vs auto leveling.......
So What do you choose? I still don't know personally, because both sides seems to be not completely honest with customers : Anycubic doesn't show us more about features like force detection, failure detection and diagnosis and for many people their after sale service is just hawful... Elegoo try to sell us a Saturn 2 revamped with the same 12k screen as Anycubic but at a too much higher price and no real videos about print resolution/comparison with 8k or the 150mm/h they promise... And both don't communicate about spare parts prices, so maybe 12k screen costs half the price of the entire machine, we don't know sh*** about it... The more time, the more I think that I will pass on both of the two. 🤔
hello Uncle Jessy, just wondering if this printer can be use for printing jewelry? im planning to try this out with the resin from powerresin, which is directly castable.
I say yes
Resolution is only 9k on y-axis (pixels are rectangular) don't fall for the hype.
so better buy dlp?
Any chance Elegoo is going to offer the option to upgrade older 3d resin printers? I just bought a Saturn 8K not even 2 months ago and I would rather upgrade the existing machine than drop money on a new one even though those new machines are really REALLY nice.
Doubtful, Elegoo didnt offer other people these printers for reviews
@@xRaptorScreamx a few have them. They just had limited quantities to send out at the moment.
Resolution is only 9k on y-axis (pixels are rectangular) don't fall for the hype. You won't tell the difference with 8K
So how is this compared to the Anycubic Photon M5s?
With the exception of those grenades on the front, this turned out ok.
can you suggest a usb wifi dongle for this machine?
I'm a bit disappointed you didn't compare it to the anycubic m5s. In fact, you didn't even mention it despite them being direct competitors. That and the video was sponsored by elegoo. I'm sure it's a great printer but it makes it tough to take your review at face value.
Do the Saurrn 3 build plates work with the Mercury X wash and cure station, or are they too large?
Yes! Shoot I meant to include that footage. It does fit and used it for the cable prints where the print was clean but still in the printer
@@UncleJessy awesome! I'd be buying a Saturn 3 Ultra if I hadn't blown up my bank account with the Phecda Kickstarter 😂