The Easiest Resin 3D Printer! Elegoo Saturn 4 Ultra $399
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2024
- Checking out the brand new Elegoo Saturn 4 Ultra Resin 3D Printer for $399 that has a tilting vat for faster prints!
Thanks to Elegoo for Sponsoring today's video!
Saturn 4 Ultra - bit.ly/Saturn4Ultra
Saturn 4 - bit.ly/Saturn4UJ
Neptune 4 Plus - bit.ly/Neptune4Plus
Neptune 4 Max - bit.ly/Neptune4Max
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooMars4
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3Ultra
Saturn 3 12K $399 ➜ bit.ly/ElegooSaturn3
Files from todays video
Miniatures by Loot Studios
lootstudios.com
Hellboy & Dune Bust by Fotis Mint
thangs.com/designer/FotisMint
Forest Skull by LaternLore
thangs.com/designer/LanternLo...
Venom Bust by HarperCrafthall
thangs.com/designer/HarperCra...
90 Degree Right Angle Bracket
www.printables.com/model/2806...
Sharpie Pen Holder
www.printables.com/model/2473...
MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
TH-cam ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #Saturn4Ultra #UncleJessy - วิทยาศาสตร์และเทคโนโลยี
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
Wow, this is making me want to get back into resin printing. This fixes 90% of the issues I had with using my Saturn 2. Thanks for the video!
No joke this takes away a lot of the headaches people have with it.
I am in the same boat - Have a S2 - Just preordered the S4U
Same here! Looks awesome
What problems did yall have. Been using my Saturn 2 since release and could not be happier
Huge opportunity missed by not adding a heated vat. It would have been perfect...
It would be cool if you showed a more detailed guide of how you clean and postprocess your prints, since the whole tray can't fit into the wash and cure station.
Look at his previous videos, he’s done a few already
This looks like the one to buy. The amount of fiddling and settings adjustments I've seen with these various printers has been what's been holding me back. Never underestimate the pull of something that 'just works'
I got started resin printing with the original Saturn. Now I have a pair of Saturn 2 printers that have performed almost flawlessly. Looking forward to getting the Saturn 4 Ultra.
Saving money to order one of these soon. This looks amazing for the price range and features.
I am excited to see the resin tray has a pour spout corner. Such a simple yet significant addition.
Really liked having the tilting vat in the Prusa SL1, glad to see it's in more affordable printers now
Bed leveling has always been my main issue (that and resin spilling)😅 This is amazing and I'll definitely have to grab this printer! Uncle Jessy never disappoints with these videos!
that was a pretty cool intro where it cycles through the different iterations
I literally *just* sold my resin printer because I hated the mess, but if I hadn't already tried resin printing, this would definitely convince me to try it. *So* much easier than mine was... Except that you still have to deal with all the mess and fumes. I don't imagine they'll ever "fix" that, though.
Yes!! You're the ONLY person doing who's gonna be doing a video on the standard Saturn 4. It's kinda a bummer no one else is doing videos on the regular Saturn 4. I'm a bit worried about the tilting vat breaking and the cost that will incur so I opted for the regular Saturn 4 (and the green is so nice) and I just wanna know
Yo Jessy! I Appreciate this video, man!
Definitely excited for the print settings from this one, as I do a TON of batch printing, and the faster that can happen the better.
A bunch of profiles going up today! Saturn 4 Ultra, Update to my Saturn 3 Ultra, a bunch of FDM Printer profile updates
@@UncleJessy Did this ever go up? I grabbed your patreon just for these and they don't appear to be updated.
The speeds on this are insane and it doesn't look like much compared to the Saturn 3 Ultra, but as you said, when you consider this is using PFA film rather than ACF, you don't loose detail, so WOW! WOW! WOW! WOW!
"fox hammer" lol. Jesse, say it like "foe".
@@nobirdsnomasters he knows, he's doing it on purpose!
@@FauxHammer We pronounce it as Dolphin not Porpoise - LUL
😂😂
FoeHammer for the win 😂
Yet again you have created a great review.
Great video!!I have to say this is one simple to use resin printer! Pretty much just slice and print. Yeah, I might have overlooked where the drip tray was in the packaging 🤔. I might have had someone in this video help me locate it during my unboxing 😂
This looks awesome, maybe I should get into resin printing
Looking to buy a resin printer and have been waiting for the S4U to release and see some reviews and I gotta say I might finally take the plunge!
solid looking printer. still a little concerned about leakage around the tilting bed though. Would love to see how that end of things foes long term
Heck, even just how it survives a fep puncture
Really interesting!! I'm still using my trusty original Saturn, would be interested in seeing a comparison between the 1 and 4, is it time to upgrade?
As a seller of models I was a bit iffy on the lower build height limit as I have a few models which are exceptionally tall. But hearing all of this this sounds like a brilliant addition to my fleet. Now if only I had more space.
Hmmm a self leveling resin printer ??? Sounds awesome and the price looks just about my budget. My only question is does those mini heaters provide the required heat output to keep the resin at desired temps and since there are more moving parts is the build plate actually leveled every time ? Thanks for the review and your time.
So mSLA have finally catched up with the tilting VAT that Formlabs introduced on the Form 1 back in 2014! Nice to see some progress! 😄
Love your videos, but Jessy, what resin are you using that you feel comfortable no mask? 😮
Jessy, is tilting mechanism more reliable printing wise, overall, compared to traditional up and down printer ? could you get away with using less supports ?
Questions:
Air Filtration of any kind?
What is the Drip tray made out of? Thinking of how easy/hard that will be to clean over time.
With the tilt feature seems like an issue could crop up for the FEP to fail and have resin leak into the printer, how easy is it to get into the printer itself to fix this?
Hi Jesse thanks for the review, can you share with us the VROOM settings for the Saturn 3 Ultra please? Thanks ❤
Thanks for the uploads. I'm building a resin farm to make miniatures for my shop. Which machine would you choose on a reliability standpoint? Does the Sarurn 4 Ultra stand up to the Uniformation GkTwo?
Jessy. The video was awesome. I've got 4 Saturn 2s and I might need to replace them with these. Do you have a contact at chitu that you could put an ear worm in? The lack of windows snap in chitubox makes me want to use lychee slicer over it
Vat tilt during print (and the bib) is a feature of the Prusa SL1S, surprised to see it here, wonder who owns the patent and if it was leased or if Prusa had kept it available for the industry.
i have pre order this printer, i'm so hype i want it right now to start my journey printing resin
How long will it take to arrive? I am considering pre-ordering it, but want to know if it will take long for it to arrive
@@TheNataliaReyes they said I will get it in June / July, but I receive a mail saying me that I'll have it before the 20 of June
Hi there Clayton! OMG, I wish the Ultra had the green lid - it looks stunning! So much cooler! And…. bib bib bib! Yeah! I love the Bib 🤣 Please, forgive us who started bibbbing in your Live Stream - which always feel like a fun party to be in 🤷♂️ You’re the man!
Will the build plate fit into anycubic's Wash & Cure 3 Plus? A compatible wash & cure is essential for me!
Great video, bought one right after watching this video.Great pricing $399 for printer itself but I went for combo with the Mercury XS wash and cure stations for $579. Would have went for the combo with the air purifier but there was not a lot of information on the air purifier and as this is my first resin printer I need the wash and cure. Would love to see a video on the Air purifier and heater from you.
Did they give you a delivery date? I want to order one but am concerned with arrival time, need it before July
@@TheNataliaReyes Same told me June/July. They said they are coming by boat to the states and then will be sent by air to be delivered
Hey UJ, is there a video for the S3U vroom settings? I just upgraded from an S to a 4 Ultra and I'm intrigued about the vrooom settings, thanks!
Commenting to support the video and the channel thank you for the update. I am still conflicted and thinking about waiting for something a little bit bigger be well be you
Sure glad I ordered mine day one release. I’ll be upgrading from my Saturn gen 1 😅 looking forward to more ultra videos!
What about screen protection? Included? Will it fit under the tilt?
I'm really curious how well the mini-heater add on works. Does it talk to the printer, so that the printer will turn it on/off and only start when at temp? How easy is installation? does it sit in the chamber with the vat like their carbon filter things? Or is it in the bottom under the screen?
I want to see that heater review before I decide if I want to get back into resin printing with this. My Saturn 2 broke me and I haven't looked at it in almost a year. But before I decide anything, I want to see if that heater works.
Great vid! Thanks
best review so far!!!
Ordered mine, can't wait for it to arrive. Should be a nice upgrade from my OG Saturn. What size is the vent circle in the back of the printer? I want to set up an exhaust system for it.
And that vent port is not built into the lid so no issues at all with detaching the hose. So nice!
I am in the exact same case and excitation state! I'm currently designing a custom exhaust system too. I managed to run a ⌀40mm PVC pipe vertically down the inside of the drywall of my workshop, as the air extraction unit happens to be located in the attic just vertically from this non-load-bearing wall. The pipe inlet emerges into the room next to where the printer will be, via a 90° elbow passing through a dummy socket cover. It connects through a custom iris shutter mechanism that I'm currently designing, that will allow me to control the amount of air being sucked in, or totally stop the extraction. I decided to use a cheap Chinese replica of a Dyson vacuum hose to connect the printer to this wall "air socket" due to the convenient quick release mechanism. I might add a small activated carbon filter (easy to replace) in order to keep the pipe and the extractor fan in the attic as clean as possible over time (I dunno it this is overkill or not? wrt resin VOCs). If I like the final setup, I'll share it on Printables :)
Nice printer morph effect man!
Just got on your patreon to look at the Vroom settings you have for the Saturn 3 Ultra. Kinda suprised that you didn't have TSMC enabled. Is that something you looked at and just found that it wasn't faster?
Hey do this printer work exactly like the. Saturn 4 not the ultra the one with the green cover
I think the tilting Vat is gonna solve so much with print release issues and I wouldn’t be surprised if it extends FEP life between replacements as well
Crazy how quickly new machines are coming out. I bought the Saturn 2 around this time last year and that was the latest machine out - now it's deemed 'old'!
At this point every spring elegoo is releasing some form of an update to the Saturns
You should make merch that says "Run off and Print!" 😄
Every new feature about this printer is an improvement on something that users had complained about with the Saturn 3 line. I'm so glad that Elegoo is not only listening to the feedback that they recieve, but also copying from competitors who are doing the things that printers love.
Please do the saturn 4 review soon 😭 Deciding which one to get and I like the color of the saturn 4 better
If the settings for speed are no longer important, then how do you set up this printer in your slicer? Like lychee for instance? Does the printer ignores those settings and asks you to select fast mode or slow mode locally before every print?
Uncle Jessy have you tried the Uniformation resin printers by any chance?
Green cover kicks arse! (do not like the charcoal translucent at all) I wonder how much the green cover is.. or of you can order the 4 Ultra with a green cover? Definitely needs a heater!
Did you ever finish the magneto lifesize statue?
Okay uncle Jesse, so I've been debating between getting that one but in the cleaning kit what's the cleaner for the print after your done?
How does this compare the new Anycubic M7 pro? Both just released, both right around same price.
i pre ordered it, and ordered a Mars 4 ultra
I currently own a Phrozen Sonic Mighty 8k. Is the Ultra worth the upgrade in print speed/quality?
what would i need to make the saturn 4 safe to use in my home in terms of ventilation?
Hey, I own a saturn and I am thinking about maybe upgrading to this, i just want to know if elegoo has a way I can allow them to resell my old printer so I don’t have to try to find a buyer to take the old one away or how can I get it to work?
Do you have control over updates ?
Wish the Ultra had the Green Cover - it Looks like it would let more light in for timelapse videos.
Does it need a air purifier? I have a big Dyson hot cold one with carbon and hepa but do I need more
Is it able to hook up to the mars mate??
Do you think you'll review the new Anycubic M7 Pro when it launches?
the space i have is very limited, but i really want a resin printer for my 3D models i make, but im wondering how bad are the fumes from a resin printer, like can i have it sitting in my bedroom and it will stink out the place with fumes or can i use it the same as a FDM printer with a little more clean up effort ?
Ordered our ultra via your link can't wait to print it. The camera does it work in a dark room amd still film in a time-lapse or do you need to get a light in the printer some how.
Did it tell you when you will receive it? I want to place my order but not sure when it will arrive, need it before July.
How’s the auto leveling? I recently bought the anycubic m5s and the auto leveling went out after only a month 😢
wait u mean the same stl files are also printible with a resin printer instead of an fdm printer right ?
Are there any slicers that allow me to insert a PAUSE PRINT command on any layer I want so that I can switch resin colors mid-print? I hate having to sit there and wait for the correct layer to finish and then pause the print manually.
I atill have the original Elegoo Saturn in the box from a super early bird order. My first daughter was born around the time it arrived and I've had another kid since. Never had a chance to use it. One day....
So how do you clean the resin off the top of the build plate?
I was super curious about this printer, i would love to have it but the overall size of it makes it difficult to have in my room space. As soon as i have space i Will consider it. Just what about the smells leaking of the shield? I'm in an apartment with other 3 people, and i would like to not have them on my throat as soon as i start printing ahahah i know it's much of a deal on the side of the resin you use, but as far as i know ther are no "smell free" option, and having it into my bedroom makes it even more of a problem.
If the fep breaks mid print - what would happen with the resin and the tilting vat?
Hmmm. I've been thinking about an upgrade for my original Saturn.
Could you add a flex plate? Is that even a thing anymore?
Saturn 4 or Saturn ultra. I have poor WIFI so that's nothing something I care about and I don't care about time laps. I currently use a thermal ban on my Saturn 2 with the till is there enough room for it to till and come up with it on? Does the Saturn 4 also have auto level?
I have the phenom l and I would like to know if it can be muted, it is super noisy.
that skull looks like a groot skull... Im gonna have to get one of these Im still running an original Saturn
The only question I have for you is what the different heights are for the various models. You give us time, but I want to know the realistic mm/h numbers
I'd honestly love to get into 3d printing, but considering how dangerous and messy resin is, that sadly wouldn't be an option, and don't really have anywhere i could put a fdm printer. This new printer does look impressive though.
How many layers is the Hellboy bust?
Would the tilting vat also help reduce issues with suction cups? It seems like it would.
I believe it would since it’s peeling away vs lifting straight up
As of 2024 what is the best resin printer with speed quality and size all in one?
more interested in saturn 4 then ultra atm. if it can produce same prints for 150.00 less for me in canada , it will probably be my purchase. still waiting for reviews.
Does this print faster than the Elegoo Mars 4 DLP?
Damn. Wish i hadnt bought that Saturn 8k in Dec
I can’t wait for mine 😂
Jessy didn't Prusa resin printer have the dipping resin tray a few years ago? So really this is not a new feature per say. I guess the patent ran out.
I think the separate heater is a nice strategy because I don't think people in warm country want to buy the printer with heater that they'll never use.
We're back to tilting like what the Peopoly laser printer did back however long ago.
Where did you get that Deadpool model behind you
How does the heater get powered? From what I see no USB ports inside this. So guessing cable but they put hole in to run it out of printer?
I believe it's battery powered
I don't think the 'Emergency' stop function should be any deeper than the live front screen when printing. I also fear the tilting vat may, mechanically speaking, end up being more hassle than bonus.
Did the autosense 'prevent' an accident by piercing the fep with a piece of debris, thus causing the same accident ? 🤔
It's more for NOT cracking screens by pushing the debris down into it. Sheets are.....somewhat cheap, screens are not.
I still wish they'd add the resin fill and drain pump from the jupiters
Build size?
ive only ever done fdm printing, not resin. What does the optional heater block thing do for resin printing?
Resin needs to be a certain temperature so it flows freely in the vat. If you're printing in a cooler space like a garage or basement, the heater will keep the chamber temps consistent.
Once they add a heated vat (Saturn 5 Ultra maybe?) it will be close to perfection. And even now without it, at $399 this is a superb machine.
I know this question is not about the Saturn but I have been thinking about getting the Neptune 4 Plus or Max but I have been hearing people talk a lot about several problems they have (dragging on prints, blowouts on the nozzle, after power loss it deletes all settings so you basically have to restart the print, and after you run out of filament and swap it that has issues) and I am wondering if that is true or if a recent update has fixed that even though this TH-camr posted this video last week
I have a 4 Plus. Works great. Keep in mind you're not going to hear from the people who aren't having issues on help forums, only the people who aren't setting their z-offset correctly, not leveling, calibrating their filament profiles, etc. It's a great printer. Level the bed with Bed Leveler 5000, set the z-offset and do a layer test. Orca Slicer has a great testing process for setting flow and pressure built into the calibration. Clean your bed with Dawn soap and you should be fine.