Making BLDC Motor || Brushless DC Motor
ฝัง
- เผยแพร่เมื่อ 26 เม.ย. 2024
- #creativethink #brushless #motor
BLDC motor works on the principle similar to that of a conventional DC motor. i am making all bldc motor models. BLDC motor though the source of supply is DC, switching makes to generate an AC voltage waveform with trapezoidal shape. Due to the force of interaction between electromagnet stator and permanent magnet rotor, the rotor continues to rotate
-------------------------------------------------------------------------------------------------------------
Components Link :
1. Copper Wire (.91mm)
amzn.to/3nNSUib
2.Neodymium magnet
bit.ly/3w3GOoH
3. bldc controller
• Video
4. Shaft (8mm)
amzn.to/3dXaApj
5. Ball Bearing (8mm)
amzn.to/3bDGZ1e
-------------------------------------------------------------------------------------------------------------
Facebook Page:
m. creativethinkg...
Instagram:
/ creativethinkgr
Twitter:
Creativethinkgr?s=09
TH-cam: / @creativethinkideas - วิทยาศาสตร์และเทคโนโลยี
It was a really nice and productive video, thank you.
Please show us rotation speed with same voltage in different motors.
Is that can be used on cycle, How should i find 12 or 24 volt motor
Maravilloso! Gracias. Thanks. Merci. 🙂🙏🏻💚
Excuse me, can you use the XR-105 controller?
Rất tuyệt vời, cảm ơn bạn
What kind of rpm are you getting on this thing
Did you check the rpm and thrust of it? If possible check and revert back
NIcely done I would say, really nice.
I would be interested in relative max. output power of the 3 types or any other data that differentiates them in order to answer the question: why bother with more stators/winding/complexity?
The relative max output power would always be limited, most definitely by the magnets. They will only attract up to a certain point; the magnets are pulled by the electromagnetic properties of the coils, but while electromagnets can be given more power, regular magnets will have a finite limit on power.
The stator is the entire part of the motor that has the coil windings, so I assume you were referring to the coil windings in your question. More coils will essentially increase the amount of magnets that can pull the permanent (neodymium) magnets. More windings will increase the voltage that can go through it, which would increase the rpm of it. A thicker cable would increase the maximum amperage and overall torque of the motor. Unsure what you meant about complexity though. Did you mean why multiple coils are continued across the stator?
Knowing the gauge of the wire, the number of turns, the number of coils, and the control board's output should be able to give an approximate relative max output power of the three types of motors, but that’s about it.
the rotation of the field with the 9 pole motor is the slowest with high torque, the six is in the middle and the 3 is the fastest with low torque.
Thanks your video👍
Which one is Higher RPM.
Wow amazing video bro👍👍💖
Excellent 🌹🌹🌹🌹🌹👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Amazing 😮
Why not use iron steel spacers to amplify your windings..
Of course silicon steel is better or ferrite for the HF
Guess optimum balance for motor weight and thrust ratio
So I this case Teslas 3 6 9
applies to motor scaling
the number of coils.
👌👌👌👌bahot khub
How many turns have you used
надо было для чистоты эксперимента ток потребления показать
Дело даже не в токе потребления а в крутящем моменте. Он около нулевой. Магнитопровода нет вообще....
100 % people watch but 2% people's try to make 😂😂😂😂❤️❤️❤️
what is the structure made of?
da para fazer aeromodelo com esses motores?
Input volt ??? And rpm ? 😊
thanks bro😊❤
how is wired the coil?
Is it 12 volt or 24 volt, if I make a round of 60 turns not 40 , what happen then how much battery volt I need to run this.
Nice video But plz add diagram of coils connections
Hi, Will this motor work with 20A ESC and a servo controller? I replicated this motor with six pole BLDC but is not working with this ESC or should I use only 12V - 36V same controller that you are using? Can you guide me on this please.
did you buy the coil from the description he gave he is a liar we need to use enamelled insulation copper coil but he gave without insulation in the description
In the description: The link to the bldc controller isn't working. Could you fix the link?
Why do you only have 6 magnets on a 9 pole motor?
wow emezing
Number 3 can be used on Cycle Motor? Can you make a vedio With a Running cycle?
And you could add a outer cage for an out-runner in runner configuration to increase the magnetic field and play with the number of turns for rpm
Is it used to be a cycle motor...
À entendre y me semble le 6bobine 4aimant le mieux adapté au régulateur
Good perfect successful project
Cool 😎
6 coils and 4 magnets only ? 9 coils and 6 magnets only ? Why are these magnet not polarizes towards coils ?
What is the plastic like material used here to wind the copper wire?
Its pvc
It is PLA
@@hahahaha.......9216I thought you had to use a conductive material, like laminated electrical steel or smc, wouldn't plastic just overheat and melt?
@@SaravanaKumarJANU @hahahaha.......9216 I thought you had to use a conductive material, like laminated electrical steel or smc, wouldn't plastic just overheat and melt?
How did you find the number of windings?
I have no idea
Awesome project! Thank you for your inspiration! Is there a difference in power, rpm, performance between the 3 pole vs 9?
Thank-you again and keep them coming!
absolutely but the wire turns got a different as well
@@mohammedk5573 wht will be the ratio of number of pole and number of coil turn?
Which material is used for making the structure
I also want to know this!
This motor can work as a power generator at the same time or another type of winding is needed
This motor converts electrical energy to mechanical energy. To generate energy, you need another source of energy. Don't forget about the law of conservation of energy.
Yes you can
Hi. Would appreciate verbal instructions also
Thanks
nice
It's not a DC motor. What comes out of the ESC to drive it?
its confused how to connect coil connection
muito bommmmmmmmmmmmmmmmmmm.
Que tenga rotor de 1kilo o 2kilo o 10kilo metronewton por segundo para un coche electrico seria gabuloso
top.
Hi thats cool
email wire coil scheme ??
كل شكر واحترام
Can u tell the dimensions of parts used in making stator ?
Hm, he's using three wires for three phases but, if it's DC it needs to be six wires to change the polarity in the coil. If it's AC, or even if you rely on the field collapse to act as the reversed polarity, there needs to be a return/ground wire.
what is thr formule of turns why 100 ı want to learn?
where did you buy that speed controller?
Your welcome
1 - single
2 - double
3 - triple
What is the name of the device that connects the electricity of the electric motor?
a bldc controller
What's the point of carving out a disc shape for the outside of the motor when the magnets are in the middle 🤔 surely it would be easier for winding the coils if those bit of plastic weren't in the way
BRO WHAT ABOUT INPUT BRO
It's the same as a stepper motor.
How do you determin the dimensions of all the parts?
Takes a lot of maths, Integrals and Inductivity calculus!
Which sizing method do you recommend? since I'm studying aeronautical engineering and my team is assigned to make BLDC
Esto rstaria bueno para un coche electrico el rotor iria.con imanes potentes y trabajarlo a 60 120volt cc Arg
Do you have the links to the models to cnc machine? Thank you in advance.
He probably does not xd
Gira mas lento perontiene mas torque
why you never show the power supply. ?
Quantos Volts é aplicado sobre o motor amigo? para fazer esses testes? Desde já lhe agradeço muito e meus parabéns pela sua inteligência 👏👏👏👏👏👏❤️
25 volts
#Desi_kalakaar
Epic video, very nice design and process, i will be using this to make one
I agree. Since I don't have a CNC I'll have to use a compass, right angle square and a dremel tool to make the stator.
@@awaitingthetrumpetcall4529 Accuracy is key... To make a functional motor is a useful skill.
@@minetest-dog-of-war-server Quote: _"To make a functional motor is a useful skill."_
If you only knew! One of my hobbies is programming micro controllers. When I discovered that I could change the behavior of a motor by writing instructions I knew I had wasted my college career!
I learned to control steppers, brushed DC's and servos but I never mastered sensorless BLDC's.
I only have a dual trace oscilloscope and the BLDC is a three phase motor.
I want to build a triple half H-bridge to drive a sensorless BLDC motor. Building a 3 stator-coil sensorless brushless motor ...and... a driver circuit would be ideal.
@@awaitingthetrumpetcall4529 that sounds amazing bro. By sensorless you mean Hall sensor? ... You can run Brushless without hall sensors but this is crude
@@minetest-dog-of-war-server I don't want to use Hal sensors. My focus is on high speed brushless motors.
I experimented with comparing three op amps to the neutral point in an attempt to detect each point in a six step commutation sequence but I failed in every case.
I really like this stuff. I'm not gonna give up.
EDIT: I used transistors in my experiments. I want to build a circuit using N channel mosfets in a bootstrap circuit.
❤❤❤❤❤❤❤❤❤❤❤😊
How can I buy this? Do you have to sell?
Winding diagram plz
What is speed of 9
Wiring connection kayse kiye ho bro 1, 2 , 3 , no ke hisaab se ? Startin aur ending wire ka kayse connection bro ? Video mein thheek se pata nahin chal paya.
Mujhe bhi bana na hai bhai saman kaha milega batao Bhai
I think You are confusing the use of the terms pole and slot.
Sir how you calculate number of Turns and number of Gauge please 🥺 guide me, I'm ready for the pay for this information
👍👋
Voltage for 9 pole
What battery that you used?
HE PROBABLY USED A POWER SUPPLY
RPM ?
sir I wanted to make a e bike.
please make a habby motor that can run e bike
High torque or high speed ???
It looks like a wye configuration.
Bro diagram q nai dete ho
Hi everyone, I want to know why 3 pole refers to 2 neodymium magnet，6 pole refers to 4 neodymium magnet，and 9 pole refers to 6 neodymium magnet ?
😲
On How much voltage you operating this motor
25 volts
Oh the wire has the isolation coating. The end of the wire strip off the coating and tight with the standard knot. I cannot understand the sequence and which side of the end tighten with the other one... I am stupid and lack of observation ability... and the patient!😅😅😑😑
6 coil wire picture send help
Missing measurement power consumption
Super super super your a engen's
Winding diagram
Where I could But to make Bldc motor making pls tell.
NASA is gonna use it to go to Mars
Not as quite as I expected but I couldn't do because I don't have thousands of pounds worth of kit to cut out the frames etc 😂
cuales son los materiales
#desikalakaarharharmahadev
Please how to build a motor with less rpm and more torque?
Buy a motor and use gears to make it RPM less and the torque will automatically increased
Coil turn >>>>
increase the number of poles or just drive the motor with lower frequency and increase the power