#5 Gears and traction mechanism - Details of free filament production from recycled bottle (PET)
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Hi guys
Finally, episode #5 was ready, many friends had requested that this video be ready sooner, but for some reason I could not upload it sooner, I hope you like it.
****for receive more information and training on how to make a filament maker Click on the link below
bit.ly/2Y3ZRDz
***
---------------------
link for donate 🥰😊:
/ mr_3dprint
you can donate however you want
-----------------------
***Thanks to my dear friend Mr. Robert Sa for providing the initial STL files to share with you friends
Thanks to the channel
rizy.ir/ws3mJ
And the Telegram channel
rizy.ir/HBQW
***
---------------------
STL gears(Free download up to 10 days from the date of release) :
cults3d.com/en...
Laser cut gears :
uupload.ir/vie...
STL Skull :
rizy.ir/kBw3
------------------------
----- Please Like & Share. Thanks for subscribe. ------
-----------------------
Other parts:
#1 Multicolor printing :
• #1 Multicolor printing...
#2 Bottle Cutter :
• #2 Bottle Cutter - Det...
#3 Extruder and nozzle :
• #3 Extruder and nozzle...
#4 Heat and motion control board
• #4 Heat and motion con...
#5 Gears and traction mechanism
• #5 Gears and traction ...
#6 Heat and motion control with Thermostat W1209 & gearbox motor
• #6 Heat and motion con...
-----------------------
Hardware required :
bearings 625 zz:
rizy.ir/EESVu
Wood screws 15mm:
rizy.ir/h4pb
metric studding steel m5 (5 x 11cm) with nuts :
rizy.ir/nmNPTd
Screw m3 - 50mm Conical:
rizy.ir/UryW
----------------------
Social Media:
instagram:
/ mr3dprint
-------------------
Music from Tunetank.com :
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
tunetank.com/t...
Music from Tunetank.com
Viktor Sabo - Promo (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
VictorWayne - Peace (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
RedLionProduction - Beautiful Sunset (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Affinity Wave - Pop Party (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Crystal Squad - In My Mind (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Alex MakeMusic - Everest (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
IsaevIlnarMusic - Fashion Deep House (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Decibel - Morning Lights (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Alexey Anisimov - Here She Comes (Copyright Free Music)
Download free: tunetank.com/t...
Music from Tunetank.com
Edrecords - Technology (Copyright Free Music)
tunetank.com/t...
-----------------
![[LIVE] : ONE ลุมพินี 80 | คู่เอก "รักษ์ vs ยอดนำชัย"](http://i.ytimg.com/vi/ckLMRorsMeY/mqdefault.jpg)
Hello my friend. You have made a complete project in different videos and detailed. I think nothing is missing from that. Congratulations to you for your very remarkable work and your involvement. score: 20/20
Thank you! Cheers!
@@mr3dp Is the "hotend" modified besides the nozzle diameter?
@@MuitoDaora yes the physical component modification is detailed in #3 of of his videos. And programming and boards are in #4.
it's a great job! and it's a fabulous way to recycle your bottles into a filament that is commonly used at home.
Thank you! Cheers!
I appreciate everything you have done in these videos! You have done great work!
Thanks dear friend
Incredible man youre a Genius, You solve the problem from filament hig cost.
Thank you so much. You can't imagine how your videos can change how 3d printers are seen and used! I'm full into it right now ;)
Congratulations!
Happy to help!
@@mr3dp TY So much man. A huge hug of thanks from a Brazilian fan :)
Very Nice and Appericiatable work love from india
Thank you very much!
سلام من هم از همین روش استفاده کردم و جواب گرفتم خیلی ممنون برای این همه آموزش های خوب چون واقعا فیلامنت گران است.
خوشحالم که براتون مفید بوده
I love u
U are make green world
Reuse plastic good job
Excellent video!!!!
Tanks for sharing...
Thanks for watching!
Sweet! Thanks for doing this. Im going to make me this. I have alot of bottles i hate throwing away
Thanks so much for sharing this man.
My pleasure!
It's great!
Waiting for a video with print settings and how the traction controller works in detail :)
Coming soon!
Hey man just wanted to say excellent work. Much love from Texas!
Glad you enjoyed it!
I love it, You are making a good job for allá of us. Thanks friend
I'm glad you like it
Amazing work! You're on the cutting edge my friend. Keep it up there buddy
Súper video, sigue así . Saludos de República Dominicana
Gracias querido amigo por tu enérgico comentario.
Great video!! Thank you for sharing!!
You are so welcome!
This is it!thanks sir!im excited to have my own 3D printer!
Hope you enjoy it!
you're amazing awesome work 🙌🏻
Thank you! Cheers!
Hi Friend, mucho gracias for this very interesting videos.. Only one question, the quantity of the filament shown is clearely not enough to print the object at the end. How do you do to make longer filament ? do stick the cut bottles before the extruder or you stick the filament after and how. Thanks a lot in advance.
Amen, asked and answered, great vids Brother!
Glad you enjoyed
Hello from Greece, you really made a great effort to apply the whole construction. and we all thank you for your effort.
First of all, I would like a small detail, the distance of the pipe inside the spool, so that it fits properly in the whole construction. because you already have it prefabricated with acrylic as shown in the video. thanks again.
from GREECE
stelios
Thank you very much!It doesn't matter how long the distance is, it just shouldn't be too short, my device is about 17 cm apart
The music in this reminds me of the game Life is Strange.
this is amazing. thanks for ahowing us how.
question for you: what is the rpm of the spool that pulls on the new extruded 1.75mm filament?
i want to use different motor
The tension of the filament is 20 to 25 cm per minute
this thing is great,I want to try now
Thanks for all!
You're welcome!
Terbaik geng..good job..hope u have great rezki
Thank you! You too!
Thanks again Mr3D!
Thank you master🙇🏽♂️
You are very welcome
thx for all these videos
Glad you like them!
Can you possibly provide us with a cross-sectional cut photo of the plastic, after extrusion?
I see a lot of these videos but somewhat doubt the results.
It seems like it is more likely to just be bending the "flat string of bottle" into a "C" shape, with a gap still in the middle
You mentioned an interesting point, yes it is true because in this process the tape inside the extruder turns into a tube, which if you have reduced the width of the tape, it becomes U, we will talk more about it in the next video.
Keep in mind when printing as noted in the other videos comments and/or description... the thickness and width cut of the strips in relation to the size of the filament. Also, when printing mr3dprint noted he used a 1.5mm g-code setting when printing to accommodate for the air present. Wondering optimal settings itemized in a list again will be good info for users. I think the main optimization setting is when printing to not set your filament to 1.75mm and to a smaller size diameter.
I love you’re videos and so grateful for this tutorial! But one question:
The links you have in description don’t lead to the tools, would you please update the links and guide us where to buy these tools to make this machine!!
Thank you so much for your great work!!
So Impressive project and you did so much efforts for this.I really appreciate it!!! . Can u Plz make a Future Video on how to colour these filaments too. It will help alot.Thanks!!!
Ask your questions on Instagram, the link is on the bio page
Neat to see the filament made with and without the heated bottle prep methods. I've seen some shrink the bottle and like you do pressurize than heat. So can make shrunk (thicker plastic), as-found and pressurized heated (thinner plastic) PET strips. Neat! Wondering if you've just heated to shrink the uneven shape bottles and have a preference?
Hi friend! Great job, you inspired me to try this project as well! I have a question: what is the total redution ratio of the gear mechanism? Is it 1 to 31? I'm not 100% sure... Tyvm
nice , i have one suggestion , how about attaching heating element to the bottle cutting blade , as the blade heatup it will cut the bottle easily , then filling bottle with air and rolling and heating it on stove step maybe can be skipped.
Thanks for the tip!
Wonderfull project. I wanted to make something similar time ago, but I hit with the problem to convert a band into a cilinder. My idea was an all-in-one machine from prepared bottle to printed object, including cutter, cutted band to cilinder and filament to extruder print. Do you think it will posible? Could the extruder of hotend printer (with some help) pull the filament thought all the process? Thanks a lot.
Cool idea!
Its a good idea, but I think that filament retraction in final printing may be a problem. We need to thing about a mechanism to keep tension constant at the flat-to-round extruder while allowing the round-to-print extruder to make its normal retraction.
Thank you so much for all the answers - all electronics is working and there is left to make only Traction mechanism.
Could you please share where to get the orange gear which is attached directly to motor?
Don't worry, just found - it is inside that cults folder with files.
amazing work, good videos
Thank you very much!
This is the way.
It takes a few degrees of heating to melt the PET bottle. After many attempts, the PET bottle line cannot be pulled out.
Great job 👍
Thank you! Cheers!
Thank you very much
Hello i'm french.
Congratulations for you project.
I will be so happy if i manage to finish this gearbox.
I Wonder if Arduino is absoltety necessary to drive the nema 17 motor?
I know nothing about Arduino and i thought use a hot glue gun instead of the nozzle you used.
Do you think it's possible ?
I'm sorry for m'y pour english.
Thanks by advance.
Regards.
Hello friend, congratulations on the great work, I'm putting together a project to make my pet filaments and I found your videos, the electronic part is ready and working, as for the mechanics, I'm not able to open the stl, can you make it available? thanks
Glad it was helpful!
cara vc e muito top o brasil te adora...
Obrigado meu querido amigo do brasil
I think its missing the top part thingy that pulls the bottle down to the cutter. In your video is in yellow lemmon color, and has 2 big bearings. awesome projects, Im starting to gather the materials to make my own. Oh and the part where the filaments goes before the Heat Block.
Middle gear
Not true, that file also exists
This is a very interesting project and very cool as you an reuse all the plastic bottles in order to make some big project 3d printed.. but how you do you remove the humidity from the bottle in order to have a dry filament?
Thank you very much!
thank u so much bro im waiting to receive my 3d printer than ill buy files from cults3d
U r just awesome man
Thank you so much 😀
Friend, your results with the recycling filaments are great! Congratulations! It's motivating.
I have an old anet a8 board and a larger anet a6 lcd and I think I'll upload your code. to know if there is a better speed adjustment. Or are you just going to work or adjust the speed of a normal printer?
incredible!!
Hi, thanks your sharing. It is a very friendly way to reuse these bottles and also can save money. I have a question. Do these bottles belong plastic symbol number one?
no
@@mr3dp Can you tell me what kind plastic you use? Thanks.
pet
And how did you do it for the first time without this winch?
Muy bueno!!
Gracias querido amigo
Organization purchase this unit, been looking for one but can't find one to purchase.
Nice work
Thank you! Cheers!
wow eres genial bro
Hello. Great video. What kind of gcode is used?
Thank you dear friend, your answer is in video number 4, the link is in the description section of this video
nice work my friend i need the stl files please put the download period ended can i have it from another link
Hello my friend. What is the thickness of plexiglass for laser cutting?
6mm
were do i get the plas for gear and traction plese
muy buen video y saludos desde España.
tengo una pregunta a cuantos cm tiene que estar la parte que calienta de la que enrolla el filamento?
Gracias querido amigo.
¿Qué parte dice que no entendí?
¿Te refieres al ancho de la barra?
@@mr3dp la distancia que hay desde el extrusor hasta el conjunto de mecanismo de tracción
How are you, my friend? I follow you and love your useful and unique content. I want to make this design, but I do not have the money to buy the STL design. Can you give it to me for free, please?!
Great video! Loved it :)
+1 Like ;-)
Thanks for the visit
why do you need to smooth the tape? And could I just regulate the power to the heating element rather than directly regulating temperature?
Great work !!!
I really love it
Where I can get the file for the gears ??
Please check the description
Thanks!!!
Welcome!
I might have a solution for the flat strips turning into c shape after being extruded. But its not my idea. Its a combo of your idea and someone elses i saw on YT. And he did not use the PET bottle for printing. Look at what he does to the 5l bottle. If you make the strips height less and get a thicker strip of more square shape rather than flat, it will extrude to round and not c shape. It might be harder to pull the strip though the cutter though.
You said an interesting point, when you increase the thickness of the tape, the possibility of the tape getting stuck in the nozzle increases.
@@mr3dp if you apply more heat to the nozzle and make a more conical entrance on the nozzle wont that do the trick?
Did you make this from multiple bottles or just one?
I think it was made from 3 bottles
how much extrude/step motor move You set in this Gcode?
Nice one🔥💕👌👍
Thanks 🔥
@@mr3dp it's amazing, but i can't make it, because all stuff that u showed in your videos few things price is too high and some stuff no one sells😔💕🔥👍
@@makewithmegma How bad, it was very upsetting. Can you guide me and tell me what piece you can not make and what is expensive for you, I will try to find a solution for it
@@mr3dp im looking for solutions too but as always an other problem i got, my pc just stop working few days a go and now it's in repair so i don't think im gonna be make that, but I'll make that one day when i get job😄, I'll dm u on ig ok, we can talk there💕👍
hola como estas? te cuento que ise mi primer prueba, pero me quedo flexible el modelo impreso, porque sera?
Esto está relacionado con la botella de la que hiciste el filamento.
The gear on the stepper motor keeps on slipping of the motor..is there a fix for this or a different design?
There are holes in the end of the gear. Tighten the screws
Hello! I have tried this and my plastic becomes a hollow tube than typical a full 'pipe' of plastic. Is it suppose to be hollow or do i need to make something smaller?
great video .do the parts have to be a certain Distant away from each other
or dosnt it matter.. and is the cord from like blinds thats on the puley wheel
Do you mean the distance between the gears? Yes, they should be somewhat distant. I also removed the rope that is around the spool from the curtain rope next to the window.
@@mr3dp the distance from the filement pully to the hot end and bottle line guide before it gos to hot end block is there a map were to drill everythink down to ..or do you space all parts ..thank you
Hello, very good video, I follow you from Spain, what I did not understand is the software part in the previous video, it does not look good, please could you put the file ???? 🙏🙏🙏🙏🙏
The file is correct and is available in the description section
Congratulations on your work! Is there a particular reason for using acrylic? Or is it possible to 3d print those pieces too?
Both!
Could you share more details about the speed and torque required for the motor, and what gear ratio is needed? Thank in advance!
Check description
@@mr3dp no info about motor
Please share the plans for all parts
Amigo, vc tem algum vídeo ensinando a fazer a máquina de fazer filamento?
Sim, caro amigo, o link dos vídeos educativos (vídeo número 1 a 8) está disponível na descrição do preço deste vídeo.
سلام مهندس وقت بخیر ، ببخشید سوراخ نازل رو چجوری گشاد کردید ؟ اخه مته ای وجود نداره که بخواد 1.75 سوراخ کنه . ممنون میشم جواب بدید ❤ Your Job s absolute Amazing
با مته 1.5
ویدیوی مربوط به اون داخل کانال هست
Hi, I have almost everything I need now to build this using parts from an old 3d printer including the board but I am not sure what to do for power supply for the hot end and I cant find anywhere in your videos. Sorry to take your time, I appreciate your work :)
Hello dear friend, you can use the same power supply of your old printer, 12 volts 20 amps, see also other tutorials (video number 1 to 8)
@@mr3dp Thank you. I just worked this out and came to apologise for wasting your time x I am just waiting for the 3d printed parts to finish and setting up the board/power supply now. Really, really appreciate all the work you have put into this.
hi fantastic job man your great one question what motor is that ? is that a normal stepper motor from a 3d printer ?
Yes, correct
Salut
Sunt din România și as vrea sa cumpăr și eu un astfel de dispozitiv
De unde as putea cumpara ?
Muito bom !
Muito obrigado querido amigo
Where is the stepper motor connected? in the Extruder Pin of the Motherboard?
yes
Hi. I have a question. I'm trying to replicate the above arduino code for 3-4 modules to work simultaneously using a single arduino board but not having success with it. Can u help me with it?
Is it necessary for me to get individual arduino boards to make individual modules work?
Is it really complete solid? The one I made is kinda hollow.
Watch video number #8
Nice one.
How many bottles u have used to print the scull?
5
¿habrá otros días de descarga gratis para los archivos STL ?
Déjame un mensaje en Instagram y te informaré de los días libres
the filament created inside is empty; on the slicer settings do you increase the flow?
The produced filaments are the same in terms of diameter, but they differ in terms of density, and this also depends on the thickness of the tape produced from the bottle. In any case, if the density is low, you can change it in the software settings and instead of 1. Change 75 to 1.5 or 1.6, this was not a problem for me
Hi there, love the videos. I went to buy the parts and all of the links appear to be dead. The only parts I couldn’t find were the nema and the power supply/adapter. Does anyone know the parts used there? (The search yielded multiple, different parts).
Search the internet for the piece's name
Great video!! But I don't like that the files cost money 😢, I know that you need it but pls
If you are really looking to make a filament maker, don't worry, message me on Instagram
@@mr3dp wow, TYSM, you responded so fast
@@mr3dp I already followed you and I sent you a message
What diameter of pet bottle strip ? I having trouble with mine (here is 10 mm strips)
1.5-1.7
What Gcode we have to upload for continuous rotation of extruder motor without retraction
Watch video number #4, G-code is available in the description section
@@mr3dp ok thank you so much
@@mr3dp thankyou so much.
How many rpm is when pulling filament
30 cm per minute
so you are saying that the skull at the end is printed with 100% recycled transparent PET from bottles ?
Yes. That's right
@@mr3dp and at what temperature are you printing this recycled PET ? And how warm buildplate ?
whats the thickness of the acrylic sheet used to produce the laser cut gears? or it doesnt matter?
6mm
Hello my friend. Is your extruder's throat all metal or PTFE lined?
PTFE