#4 Heat and motion control board - Details of free filament production from recycled bottle (PET)
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2021
- Hi guys
I came to your service with another part of the tutorial on making a filament machine
In this part, I want to have a surprise, I and a friend of mine, Mr. Robert Sa, were finally able to prepare a special movement code and reduce the costs, so that I have already used another Arduino board to control the movement, but now we control both the temperature and the movement with one board, of course this project is being completed, I would like you to tell me your opinion about this system, so that in the next editions we can have a more complete product.
****for receive more information and training on how to make a filament maker Click on the link below
bit.ly/2Y3ZRDz
***
---------------------
Files used in the video:
arduino :
www.arduino.cc/en/software
marlin1.1 (new version) :
uupload.ir/view/marlin-1-1_j8...
gcode (202-55):
uupload.ir/view/gcode_f4ak.zip/
free stl model :
rizy.ir/xUjH7
-----------------------------
link for donate 🥰😊:
/ mr_3dprint
you can donate however you want
-----------------------
Thank you all
In the case of 3D printing of the ship in the video : 10 bottles of mineral water were used for this ship
------------------------
----- Please Like & Share. Thanks for subscribe. ------
-----------------------
Other parts:
#1 Multicolor printing :
• #1 Multicolor printing...
#2 Bottle Cutter :
• #2 Bottle Cutter - Det...
#3 Extruder and nozzle :
• #3 Extruder and nozzle...
#4 Heat and motion control board
• #4 Heat and motion con...
#5 Gears and traction mechanism
• #5 Gears and traction ...
-----------------------
Hardware required :
LCD 128*64
rizy.ir/zyIAq
Board RAMPS 1.4
rizy.ir/Iool9B
Mega 2560
rizy.ir/aRaHu0
Heater 12V 40W
rizy.ir/GFIm8u
100k Thermistor
rizy.ir/Bejk
Power Supply 12V 20A 240W
rizy.ir/Uch8c4
Stepper Motor Driver A4988
rizy.ir/5A82
Nema 17 3.4 Kg-cm
rizy.ir/fpzXq
-------------------
----------------------
Social Media:
instagram:
/ mr3dprint
-------------------
Music from Tunetank.com
Viktor Sabo - Promo (Copyright Free Music)
Download free: tunetank.com/t/33i4/5143-promo
Music from Tunetank.com
VictorWayne - Peace (Copyright Free Music)
Download free: tunetank.com/t/33i4/5040-peace
Music from Tunetank.com
RedLionProduction - Beautiful Sunset (Copyright Free Music)
Download free: tunetank.com/t/33i4/5241-beau...
Music from Tunetank.com
Affinity Wave - Pop Party (Copyright Free Music)
Download free: tunetank.com/t/2k46/5109-pop-...
Music from Tunetank.com
Crystal Squad - In My Mind (Copyright Free Music)
Download free: tunetank.com/t/2k46/3471-in-m...
Music from Tunetank.com
Alex MakeMusic - Everest (Copyright Free Music)
Download free: tunetank.com/t/2k46/471-everest
Music from Tunetank.com
IsaevIlnarMusic - Fashion Deep House (Copyright Free Music)
Download free: tunetank.com/t/2k46/5023-fash...
Music from Tunetank.com
Decibel - Morning Lights (Copyright Free Music)
Download free: tunetank.com/t/2k46/5116-morn...
Music from Tunetank.com
Alexey Anisimov - Here She Comes (Copyright Free Music)
Download free: tunetank.com/t/2k46/5138-here...
Music from Tunetank.com
Edrecords - Technology (Copyright Free Music)
tunetank.com/track/2268-techn...
-----------------
سلام بچه ها
با یک قسمت دیگه از آموزش ساخت دستگاه فیلامنت ساز اومدم خدمتتون
توی این قسمت میخوام یه سورپرایز داشته باشیم ، من به همراه یکی از دوستانم آقای "رابرت سا" بالاخره توانستیم کد مخصوص حرکت را تهیه کرده و هزینه های تمام شده را کاهش دهیم ، به این صورت که من قبلا برای کنترل حرکت از یک برد آردویینوی دیگر استفاده میکردم ولی از این به بعد با یک برد هم حرارت را کنترل میکنیم و هم حرکت را ، البته این پروژه در حال تکمیل است ، دوست دارم شما هم نظر خود را در مورد این سیستم به من بگویید ، تا در ویرایش های بعد بتوانیم محصول کاملتری را ارائه دهیم .
با تشکر از همه شما - บันเทิง
Instead of a ship IN a bottle, it’s a ship FROM a bottle, I like the play on words.
true jajajajaj
I do not understand what you mean, you mean I wrote wrong?
@@mr3dp no no, you wrote correctly, your video is a ship from a bottle. John Smith is referring to a desk toy where a ship is inside of a glass bottle.
@@isaacf.5166 ok. :)
@@mr3dp it is a play on words in English. Instead of building a ship inside a glass bottle(how they are traditionally put together) you took a plastic bottle and printed a ship from it. I like it :).
You're amazing to share this information. This product called: PET bot costs around $400. And of course people want to make money out of it, but you are very generious to give us the knowledge to build one for our own, without breaking the bank. Therefore I am very thankful and I support your goal and vision. Keep up the great work!
You're amazing dude, I really appreciate the efforts that you put in to make these videos and rebuilding the extruder and filament everytime to show everybody on how to do this step by step. Bravo! 👏👏👏👏✌️✌️✌️🙏
My pleasure!
im amazed by the quality you can achieve with this setup
Great work!
Can't wait to see more of your projects!
hello mr3dprint:
The truth is that in the first editions of this great project, the electronic / arduino part looked a bit complicated, but reading the description I understood why now it looks simpler. my greetings to mr Robert sa for having collaborated with you and making the project simpler and cheaper.
Greetings from Argentina and thank you for having shown it in detail so that the rest of us can do it too.
Thank you for your energetic comment.
This is amazing! I have zero parts to make this from, but I get through so many plastic bottles, it might just be worth buying it all!
You can do it!
Wow👏👏👏👏👏👏👏 that was impressive! I’ve been thinking about how to make filament but never thought about this way
You can do it!
Incroyable ! Cet homme est un génie. Congratulations from Paris.
Merci cher ami, vous êtes gentil
Awesome to see all the views now and members! Very nice and thank you for sharing!
Thanks for watching!
Wow, excellent video and full of resources, I'll try to make one at home, thanks 👍
Cool it is the connection of the motor which was bad. Everything works perfectly as you present it.
Thank you for sharing your ideas with us.
Glad it helped
Great job 😍 awsome print.
Thanks so much 😊
Your diy direct extruder looks verrry intereresting, maybe you can show how you build it and how good/for what it works well :)
I worked for a plastics company for many years and we had an extruder recycling plastic on an industrial level of course. You have the basic concept. you can run the heating side with a thermostat controller with a thermometer or even with a thermister, i use this, on the feed side, i join the plastic with a soldering iron to have a longer continuous feed. And i have a dc controllable motor on the take off side to roll on to a normal filament roll! good Work PM me for any help you may need
Dude youre a genius. This an instant sub, boutta watch all your videos
Thank you! Cheers!
Great work, nice idea👍
Thank you! Cheers!
Heck yeah dude, thanks for helping humanity change the world! 😌🌎✨
Thank you for your energetic comment.
That is impressive thank you for this. I will try to re-purpose the water bottle as you have done it.
You can do it!
Hello, you make really great job !!! I learn so much from your movies !!! I have one questions: when i used the DIY filament from recycled bottle (PET), do I have to change my printer settings or can I keep them for PLA filament? (I have a Geeetech Mizar S printer) Thanks in advance !!
Your videos are so addicting to watch, subbed to you
Glad you like them!
Amazing may God bless you !
Thanks a lot man I was looking for information on this n ur videos were very useful ❤️❤️
Glad to hear that
Thanx again for your upload. Your content is awesome!!
My pleasure!
Great video, thanks!
Thanks for another installment. I like the idea of using gCode instead of hacking support for constant movement into marlin like I was planning. For easier starting you should add the following line after the extruder is heated (this should pause the gCode so you can load the filament into the puller): M0 Press to start motor
Glad you liked it!
@@mr3dp do you know when the files for the winder will be available?
soy fan de este proyecto, sigue así y muchas gracias por compartir .
saludos desde republica dominicana.
Gracias querido amigo por tu enérgico comentario.
Огромное вам спасибо! Благодаря вам всё работает.
Gracias por compartir tus videos !
Bravo! Perfect idea!
Thank you very much!
Amazing Video!
Looks great! Super channel
Thanks for visiting
Excelente! Botella reutilizables para impresión 3D
Eres el mejor! Saludos desde Costa Rica
Gracias
this seems like an interesting use for my spare ender 3 mainboard
amazing, i cant belive, i'll do this
you're amazing thnx for sharing 🙏🏻
Hola , gracias por tu pronta respuesta , yo tengo una tevo tarantula , y habia comprado una placa y display de repuesto (MKS Base v1.4) ayer la puse a funcionar y va perfecto para este proyecto , actualmente estoy imprimiendo la caja de engranajes , muchas gracias por las importantes ideas y , un gran trabajo , saludos desde Buenos Aires , Argentina .
Gracias por tu enérgico comentario.
Great work! I wonder how precise and consistent the end filament is. Do you plan on adding a diameter sensor of some kind to compensate the extrusion on the fly?
I do not think it is necessary because it is diagonal, I may just put the motion sensor off when the tape is finished
Cant wait to see how you make the filament roll maschine
Great job bro..
Thank you so much 😀
thx this is your best video to date
Glad you think so!
amazing . you are great . we need a video on wheel pull the wire
Ok coming soon
I really appreciate the efforts that you put in to make these videos. Not available files. could you please share your marlin version and gcode?
again you are awesome... very helpful info...
Thanks again!
Very nice how about if we have unwanted printed parts how do we can do the same ? Which nozzle size do you use to extract 1.75mm ??
U did it again,thank you so much🔥😍👌👍
You're welcome 😊
@@mr3dp I'll send u pic when i make one💕👍
as always
thanks for material
My pleasure!
Excellent idea man😍
Now what u need is a successful filament joiner to make a full spool out of the pieces
Yes, you are right
Great work brother!😃 Your new subs.
Much appreciated!
For those not in the know you can use a mksgenl in place of the 2 boards as they use the same chips.
Very good job
You are great i solute you thanks for sharing this type of ideas
Thanks and welcome
Keep it coming need, to know the puller mechanism, and then the finer points like how to get the first bit through the nozzle and tie it to that spring?
Thanks for sharing.
Will do!
super et bravo je suis admiratif
no way.... unbelievable :O
Hi @mr3dprint and let me say, what an amazing idea and work.
I have a quick question, I have a 12v, 5amp and 60W power supply, it is going to work or do I need the 20A 240W one to make it work??
Thanks again
If you do not have a good power supply, you can use old computer power, I will make a video in this regard, be sure to watch it
Aliexpress noted this.. i bet soon some bottle recycling system to filament will be out :) congrats for a nice video.
That would be cool!
Well I commend your work. Well done. That being said that's a ton of work for filament. Think i will stick with getting mine from Amazon. 😄
Go for it!
Tks a lot for sharing this
No worries
Hey mr3dprint, how you doing? Man, you made me take out the dust of my 3d print and get motivated again. I always wanted to make the 3d print usefull and now, with your videos, I can. Thank you so much. If you can, could you, pls, post your slicer settings? Thank you so much and congratulations for the videos and the amazing idea.
Glad to hear it!
another great video .
most people got the parts lying around from neally a decade ago lol
Very nice!!!
Thanks for the visit
I don't know.. I'm still on the fence about the whole process.. But each video I'm somehow more convinced..Nice Persian Rugs.
You can do it!
thanks for sharing
Hi. You do great fun and work. Thank you. Subscription flies
Thanks and welcome
Is amazing.
That's impressive!
How do you join the filament length for every different bottle become one filament?
Thanks dear friend, watch video # 1
Hola , lo felicito por su proyecto , solo quiero saber si junto las partes del barco , porque en thingiverse aparece el casco separado y en su impresion esta junto , gracias
Hola, gracias por tu comentario, sí, las partes están separadas, pero corté el casco del barco en una sola pieza en el software y lo imprimí.
Nice.... Bravo.
Thank you
Hello dear Reza, Many thanks for your great job.
I have an Ender 3 pro board & screen can I use them in this project? If yes can I use the original g-code to make it work?
I do not know exactly, you should test to see if G-Code works with it or not, of course there are easier ways, the next videos will be about those ways
Respect✌
Can you post the stl you used for your filament winder? Thanks for all of this great info. Much appreciated!!!!
The next video will be about it
@@mr3dp Thanks!! I was going to convert a crank winder and another spool holder to do that by adding some gears in a train. So seeing your models would be great!
Great series of videos definitely thinking of making one the only problem is I cannot find the motor in stock anywhere could any other stepper motor work and if so, which type, thanks in advance
You can use the same gearbox motors, such as the car windshield motor - or the car wiper motor or ....
@@mr3dp thankyou for you're reply so pretty much any stepper motor will work? I'm ordering the parts today to make a start :) one other thing though you know the acrylic big gears you use could I print them instead as I haven't got a laser cutter? And what order do The cables connect into the power supply unit? thankyou in advance
How does the filament print stick on the heatedbed glass?
Do you use anything on the heatedbed glass? At what temperature is the heat bad?
Thank you.
You're welcome!
Love your project!!!! please advise i get : "THERMAL RUNAWAY PRINTER HALTED please reset" why?
This problem occurs when the thermistor is not in place or is connected to the body, please check that the thermistor is in place so that it can report the temperature of the heater
hello, you can only buy the drv8825 here in costa rica, I have not been able to find the a4988, everything else is exactly as in the video but the motor only feels like it wants to take steps but does not move
Amazing!
Thank you! Cheers!
Hola! Muy buen video. Le quiero preguntar como hago para modificar la velocidad del motor. Muchas gracias
You have to change the G code
Have you worked with any bottles that are 0.65mm thick? and if so that are size does the ribbon need to be? thanks, Like before great work.
I am working on a PET filament welding/splicing device that run off of the same Ramps board but uses 2 extruders. One for the puller part and the second for the welding part. Thanks for the fantastic idea.
The maximum thickness I have worked with is a 0.5 mm thick bottle, for which the width of the bar is 6 mm.
I've wired mine to my ender 3 and using the e stepper motor
Hello Mr3dPrint.
I have no words to thank for sharing this invention and I really want to make one for myself. It is brilliant.
Thank you very much really. I am following the process with great interest and excitement.
The world needs more recycling and less garbage, the oceans ...
Apart from making our materials cheaper, etc .. it's great :)
I have a simple question: I am very new to 3D printing.
Can I use the 2004 lcd instead of the 12864? It's a really insignificant detail, right?
I suppose it is a question of having the Marlin with the corresponding screen library to use?
Kind regards from Spain and I wish you all the best
My opinion to improve the project or to contribute ideas that you ask in the description, is that it would be ideal if crushed plastics could also be used and that it was not a complicated system. I guess it would be a different machine or a very different concept.
I mean in this machine a simple system that pushes crushed plastic is attached to it. Maybe I'm going a lot out of the original idea, I don't know, or maybe it's possible ...
This one is cool and simple, the other idea would also be great in my opinion and would use different plastics from different packaging ...
but with this philosophy of simplicity and materials within reach.
Much encouragement and thanks for the great contributions and the desire to share.
I do not know, but I think it does not matter, see if GCode works properly in your program?
So was impressive
This is an awesome project. I'm wondering what the purpose of pumping air into the bottle and spinning it over the stove is though. Is it to smooth out the shape of the bottle so that it is easier to cut? Also, what is the thing that attaches to the bottle's cap that connects to the pump? Thanks for sharing this.
The purpose of heating is to smooth the outer surface of the bottle
And what I attach to the bottle is a Rubber Valve
Pumping air will make soft plastic expand that's why
@@mr3dp rubber shradder value
Комментарий в поддержку канала и ролика, а также труда мастера.
I've been waiting for this video for a long time! can I give you an idea '?? why don't you try to make like a funnel so as to insert all the remaining filament bottle caps etc etc? something that automatically drops the filament to the extruder would be wonderful
huh? drops bottles caps into the extruder? Dont you mean into the heat block? Also did you mean to say.. to shred up the plastic bottle caps and then drop them into the heat block? If so the word you're looking for is a "hopper". OR are you saying for him to direct the filament into the extruder to print immediately upon making the filament instead of rolling it up on a wheel?
Do you have a video showing how to build your winding system? Very interested in that segment, speeds, sensors, etc.
Yes, I will publish it soon
@@mr3dp absolutely awesome. Thanks for all of the great videos.
Thank you
Firstly, Thanks for sharing ! Question. Can you use a MKS Gen-L controller board ??? rather then a ramps ???
Maybe, you should test
Yes just modify you firmware. RC
thanks brother
Can you do a video showing how hard, flexible or mechanical properties has pieces made used by this reclides filament from pet bootles? Great work luv it
Ok will do
@@mr3dp yep I'm also interested in the mechanical properties of PET filament
@@mr3dp send some samples to Stefan of cnckitchen :D
hi sir and thanks for sharing, I have question when you insert the SD card what do you have saved on it? I have followed all the step but no sure what is on SD card and if it is important for final setup
Yes, correct
so does the g-code control the heater and the speed of the stepper motor
Hi, thsnk you for some great explanations om this topic. I have 2 questions:
1. Is it necessary to pressurise and heat up the bottle like you do in the beginning? Or what I be possible to skip this step?
2. When you pull it out of the nozzle that is 1.7mm do you ever get inconsistent plastic size so maybe 1.5 instead? Does the plastic sometimes break when you are making the filament?
he pressurizes the bottle so when he heats it up, the plastic expands uniformly and becomes smooth, so when the bottle is cut into a strip the maximum possible of the bottle is transformed into a strip, because those uneveness on the bottle may cause a inconsistent strip and/or break the strip when it's being pulled
1. The purpose of heating is to smooth the surface of the bottle, we do not do this for smooth bottles.
2. When leaving the nozzle, if the traction speed is high, the gear filament will come out, load the attachment G-file, the speed is good
Hey, great project! im trying to do it myself
Can I use a 20x4 LCD ??
I don't know, maybe it can be done with it, I recommend doing it with thermostat w1209, it's easier
@@mr3dp If I use the thermostat w1209, I would have to set the appropriate speed inside the arduino code and then control the tempeture using the Thermostat? Is that it?
Im from Brazil, and the LCD 128x64 costs a lot of money
Awesome.
Glad you think so!
What about the wheel assembly... Thanks. Much appreciated the info. Thank you!!!¡
Coming soon!
@@mr3dp THANK YOU!!! God bless you!!!
That's amazing !
But may I have a question :
why the code you share named "marlin 1.1 (new version) "is different from that in the video ?
Please upload the attached code
@@mr3dp it is not working
@@saadsayyed9442 You can replace it with other versions
@@mr3dp how do we do that?. PS your work is awesome