#7 Connection and collect filaments - Details of free filament production from recycled bottle (PET)
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2021
- Hi guys
I came today with another tutorial
And this tutorial is about connecting and collecting the filament of recycled bottles
And at the end of the tutorial, we will make a Hulk wall sculpture that is made of 3 PET bottles.
I hope you enjoy this tutorial
---
****for receive more information and training on how to make a filament maker Click on the link below
bit.ly/2Y3ZRDz
***
---------------------
link for donate 🥰😊:
/ mr_3dprint
you can donate however you want
-----------------------
stl :
cults3d.com/es/modelo-3d/arte...
-----------
Other parts:
#1 Multicolor printing :
• #1 Multicolor printing...
#2 Bottle Cutter :
• #2 Bottle Cutter - Det...
#3 Extruder and nozzle :
• #3 Extruder and nozzle...
#4 Heat and motion control board
• #4 Heat and motion con...
#5 Gears and traction mechanism
• #5 Gears and traction ...
#6 Heat and motion control with Thermostat W1209 & gearbox motor
h • #6 Heat and motion con...
#7 Connection and collect filaments
• #7 Connection and coll...
-----------------------
Social Media:
instagram:
/ mr3dprint
-------------------
Music from Tunetank.com
Viktor Sabo - Promo (Copyright Free Music)
Download free: tunetank.com/t/33i4/5143-promo
Music from Tunetank.com
VictorWayne - Peace (Copyright Free Music)
Download free: tunetank.com/t/33i4/5040-peace
Music from Tunetank.com
RedLionProduction - Beautiful Sunset (Copyright Free Music)
Download free: tunetank.com/t/33i4/5241-beau...
Music from Tunetank.com
Affinity Wave - Pop Party (Copyright Free Music)
Download free: tunetank.com/t/2k46/5109-pop-...
Music from Tunetank.com
Crystal Squad - In My Mind (Copyright Free Music)
Download free: tunetank.com/t/2k46/3471-in-m...
Music from Tunetank.com
Alex MakeMusic - Everest (Copyright Free Music)
Download free: tunetank.com/t/2k46/471-everest
Music from Tunetank.com
IsaevIlnarMusic - Fashion Deep House (Copyright Free Music)
Download free: tunetank.com/t/2k46/5023-fash...
Music from Tunetank.com
Decibel - Morning Lights (Copyright Free Music)
Download free: tunetank.com/t/2k46/5116-morn...
Music from Tunetank.com
Alexey Anisimov - Here She Comes (Copyright Free Music)
Download free: tunetank.com/t/2k46/5138-here...
Music from Tunetank.com
Edrecords - Technology (Copyright Free Music)
tunetank.com/track/2268-techn...
----------------- - บันเทิง
Hey man, I've worked put how to get almost CLEAR SEE THROUGH Recycled-PET!
All I did was Increase flow speed to 130+ 😂 I'm so happy 😁
Thank you again! 👍
That is awesome!
Good editing with catchy and calming music. Also, it's a clever way to recycle!
Thanks dear friend, welcome to my channel
@@mr3dp You're welcome, man! Thank you!
کارت حرف نداره
امیدوارم همیشه موفق باشی
عالیه
تشکر شما لطف دارید ، به همچنین
I like your approach to problem solving nice work.
Thank you! Cheers!
Super! 👍
tremendo trabajo muy bueno, en alguno momento espero hacer uno igual !!!
Комментарий в поддержку канала и ролика, а также труда мастера.
wow its fantastic
Extraordinario!
Buen trabajo amigo. No se con que haces el agujero para pegar el filamento ni tampoco que es el tubo blanco con el que unes el filamento
humildad 100%
Thanks for sharing! We'll see if this winter I can fabricate the design I was thinking using DIY pliers, or an attachment to pliers, with a built in hot end design (heating element and thermocouple) where the heated tube filament fusing section will be cut in half so easier to open and remove the filament once the two pieces are melted together.
Thinking a similar cut and polished tool might be handy for the bottle strips also so those can be fused together. Would be nice making for that design an adjustable width and possibly shimmed for thickness mechanism. Thinking something like channel locks in a finer opening increment might aid in making that an easier tool to change sizes.
Go for it!
Have you made any progress on this idea? There is something similar online, but I don’t think it works well for PET.
No, I haven't actually done anything 3D printing related other than saving materials and getting another 3D printer I still haven't assembled yet. Looks like the Mosaic Palette systems are the best to couple the filament ends, though seems something else I saw online was impressive, though I forget offhand. When I remember, I'll try to comment again to pass on the info. A little busy now. Thanks for checking. @@nerdyranger1120
I'm here 3 hours looking, i want do it.
Beautiful. Just a suggestion, redesign your filament extruder gearbox so that the filament roll can be lifted out of it and fed directly from that roll into the printer.
It is not possible to do this because the speed of filament production is much faster than the printing speed of a 3D printer
what is this small tube that you use for connecting the filament?
Excelent! Fiz uma máquina dessas baseadas algumas coisas pelos seus vídeos, deu muito certo! Fiquei impressionado com a resistência do material impresso, nem se compara ao PET-G. Impressão fácil só precisei aumentar o fluxo pois o filamento não fica 100% dos 1.75 preenchido. Muito obrigado por esse trabalho incrível que você compartilha com todos.
Fico feliz que você também tenha conseguido fazer o dispositivo, pelo que você disse pode alterar o diâmetro do filamento no software de 1,75 para 1,6 ou 1,55 e o problema estará resolvido.
Vc poderia fazer um vídeo ensinando como fazer essa fábrica de filamentos... Muito show isso
@@juniorsucrasbr En la descripción de este video hay más videos sobre diferentes pasos.
Obrigado por compartilhar!!!
Obrigado querido amigo por postar seus comentários energéticos
Eu que agradeço, gostaria se possível fazer 2 perguntas.
1-Resistência do Pet Reciclado após impressão.
2- Se usa ptfe no seu hotend ou é allmetal, por causa da temperatura de extrusão.
Grande abraço!!!
@@gustavoperuchimaroneze4337 amigo qual. Sera a espessura do bico que ele usa? Em vista que os filamentos comum sao de 1.75mm
The one thing I keep thinking is needed is another set of gears to spool it up off the extrution tool to be ready for the printer.
1st like too.
Eres increíble bro sigue así , imprime por favor alguna figura de Minecraft o una taza para el café , amo tu canal
Obrigado querido amigo pelo seu comentário enérgico
@@mr3dp muchas gracias bro , amo tu canal sigue así
Nice design, have you considered adding a filament thickness sensor to have a closed-loop feedback control of motor speed?
It is not necessary to do this because if the width of the strip is the same, the thickness does not change
thanks for sharing the experiance, what heat controler board is there?
Hi dear friend.
Watch video number #6, there is a full description in it
You're Amazing! How long on a piece of filiment do you get from a single bottle?
another super video ..? the hotend ptfe hole how dos the ptfe come into contact with the heater cartriage
or do you dril the hole like 2mm from the edge thank you
You need to drill a hole the size of the outside diameter of your fireproof Teflon tube
I would like to ask about the joining did you drill a hole trough the heat block? also what tube is that you are using to join the filaments? where can I get it, what diameter, what material?
Read the description
@@mr3dp Thanks for all the cool projects, but could you please clarify on this point - I wasn't able to see anything in the video description related to the question from @Juzzek ... Could you please explain this a bit better?
@@passivelib See video number one
Continua così
Nice, i want to be like you.
Wow, thanks
At what Temp do you connect the filament? I keep failing :(
Ask your questions on Instagram, the link is on the bio page
Thats the most stupid answer i ever got from a creator.
Would it be easier to melt/weld the cut strips together BEFORE putting it into the hot end to make the filament?
I have tried many ways, but so far none have worked well!
Hey I was wondering if we could use something like an iron or hair straightener to melt press two strips from different bottles together and then cut off the excess which may ooze out from the sides.. Do you think this will work?? Also amazing ideas man..your improvements and inputs are awesome... I come from a place where filament is quite expensive and this is just godsent. Props to you...
@@madeintexas3d442 no I meant what if I joined the initial strips from the bottles together before passing it through the extruder and turning it into filament.. Basically joining them before turning them into filament...
Thanks dear friend, I have tried many methods to connect two tapes, but so far I have tried every way, it has failed, but I am trying other methods, and if I get the answer, I will publish a video of it, if you Also, try methods that you are sure will work.
@@mr3dp Awesome!! Thanks!!
@@mr3dp similarly to spot welding could you use the tip of the nozzle to push from the top down onto two strips of plastic bottle
Hello friend, your video is very good, one question, is the temperature you use to deform the PET is 78 ° Celsius?
This temperature is not real, in fact the temperature is 205 degrees
Watch video number 6.
A complete description of the temperature is given in it.
Would this process work on the Green strapping material used in shipping? I work for a shipping company who throws out a ton of strapping, I think the material is Tenax™ polyester
I have not tested, maybe it can be used in this way, you can test
Hey, I'll be very grateful if you could answer these questions for me. @mr3dp
Does your filament come out to be hollow from the inside? (my filament is hollow from the inside)
If the filament is 1.6mm . Can that be used to 3d print on Prusa MK3S or will it damage the printer?
When it is printing, it is having many air bubbles
This can not be a problem, you can consider the thickness of the filament in the software less than 1.75, for example 1.5.
Hi. At what temperature must be printed the pet bottle the nozzle and the heated bed? Waiting for your answer thanks.
Watch video number 8, full description is inside it
Con este tipo de material hay dificultad para que se adiera bien en la cama ? No sé me pega cuando empiezo a imprimir 🥺
No, no causa ningún problema, incluso más fácil que el ABS.
@@mr3dp no se me adiere a la cama y fuera de eso se ve raro como grumoso jejeje
You have to glue it on your board with "Glue Stick"
maybe if you fuse the cut bottles and then make the filament :o?
💚🔥😍👌👍
🖖 👍
Hello how much meter each bottle for 1 kg of filament ? Thank you great work
10-14m
Hello, I have been following your videos and I made a machine like yours. But when printing the Nozzle of my 3d it is ALWAYS covered. The same thing happened to you? How can I prevent it?
I do not understand what you mean if you can leave me a message on Instagram and make a video of the process and send it to me to see where the problem is
Как ваш пид регулятор работает,он же расчитан на 120 градусов
Ask your questions on Instagram, the link is on the bio page
Its a really great working concept. I wished I could make this in Germany. But it just does not make sense here as there is no PET Bottles without deposit. You would need to pay 25 Cents per bottle which makes this invention senseless here. If I would have a source of PET Bottles I would build this For Sure. I bought the Filastruder and plan to experiment with other Sources of plastic.
I am first!
داداش کارت درسته . ای کاش این آموزشها رو به فارسی هم میزاشتی که به درد فارسی زبانها هم میخورد
تشکر دوست عزیز ، سعی شده آموزش ها ساده باشه تا همه بتونند بسازند مثل اون رو
درست میفرمایید اما اون قسمت ساخت کانکشنهای بین هات اند و بورد تنظیم دما و سرعت چرخش موتور و اون دیودها یکم گیج میکنه آدم رو . من که کارم ساخت CNC هستش با آردوینو ، واقعا هیچ چی نفهمیدم از شماتیک و ساخت اون دستگاه تبدیل pet به فیلامنت
@Musa Aftabi شما شروع به ساخت کنید هر کجا مشکلی داشتید برای من در اینستاگرام پیغام بگذارید سعی میکنم راهنماییتون کنم
What is that white piece which you put at time code 2:58 to join 2 filament?
Refractory Teflon, watch video number one
@@mr3dp some of the items is not available and some can't be shipped into country.
I'm trying to develop a way to use 3d printer to recycle pet bottles inspired by this
It's not hard work, you certainly can
@@mr3dp thanks, i think i'm pretty close
Добрый день. На заказ такой станок за сколько соберете?
Привет, дорогой друг
Это проект с открытым исходным кодом, и мы не собираемся продавать этот продукт.
Hey mate good work ,but can you PLEASE ...PLEASE Be kind enough to return to the original project whith the arduino and shield I just bought all the components you suggested (I bet im not the only one) and now you want to use the other motor and controller you posted on video 6 PLEASE theres still missing information for the original project for example :could you explain how to wire the stepper to the shield (what kind of terminal do we need JST ,DUPONT?do we need to crimp them or can we buy them premade ? A cnc kit usually comes with cables with 3 pin dupont on one side and a 4 pin JST on the other end but it wont match the pins of a NEMA 17 steppper, wich connector do you reccomend for this? ) , the next thing thats not very clear is how to conect the wires to the PSU Im just an intermediate user of tech,not an engineer I would really be very gratefull if you didnt take for granted that all your followers know how its done for this shield in particular, Finally and probably the most important part could you please explain how to tie the first extruded filament from the nozzle to the wheel what kind of knot do you use , what kind if wire (diameter ,material).do you reccomend ? ,Thank you for sharing this with us ,youre awesome and I wish you great success for your chanel and your projects but PLEASE finish one project and its explanation before you start another .
Hello dear friend, can you make a video and send it to me on Instagram to see what your problem is?
@@mr3dp Im sorry I dont use instagram , I was just suggesting you some things you could explain in your future videos , I would be very thankfull If you at least took them in consideration .I have been following your channel for a while and I was pretty exited when I finally gathered the parts to build the machine you made in your videos 1 to 5 but suddenly you changed all the pieces used except for the stls, I know it might be a better configuration using the geared motor but I think you left some unexplained things on the first one . THANK YOU for answering my first comment.
@AEONTHECONJUROR7
he ran the RAMPS board by powering the attached Arduino MEGA through the USB cable in video number 5. You should get a plug with your RAMPS board that you can screws in wires to 12V power from the power supply recommended in the first comment of that video.
As for the stepper motor wiring, you uy pre-wired RAMPS stepper motor cables for use with NEMA17 stepper motors very cheaply, as these are a common 3D printer part.
If you want to make your own, they have a Dupont 4-pin connector at the board end and a 6-pin JST connector for the NEMA17 motor, usually connected to pins 1, 3,4 and 6.
There are a lot of wiring guides available for RAMPS setups, this one is a good example (although the filament maker uses only the extruder motor and thermistor).
You could always use the RAMPS board to build a 3D printer with later if you do decide to switch hardware like @mr3dprint did!
@@techheadfredThank you very much for your answers , I really do apreciate the time you took to write them . I will certainly follow your advise and get the cables premade , Again many thanks mate .
سلام . کارت خیلی هوشمندانه و البته زیباست .
اگه بخواییم خودمون همچین دستگاهی بسازیم میشه کمکمون کنی؟
تشکر دوست عزیز ، آموزش ها بسیار ساده عنوان شده که همه بتوانند آن را بسازند، فقط لطفا با دقت ببینید
@@mr3dp بله درست میگین ولی تو یه قسمتی که چرخ دنده ساختین واسه کشیدن مفتول پلاستیکی اونو بیرون نمیشه پیدا کرد باید اندازه داشت و نقشه .
ولی واقعا لذت بردم از ابتکارتون 🙏
@@aligharejedagi4463 فایل هاش داخل دیسکریپشن آموزشش هست میتونید بسازیدش
سلام
عالی بود
میشه تگرامتون بدید من می خوام فیلامنت ساز راه بندازم چند تا سوال داشتم
Nice
تشکر دوست عزیز توی اینستاگرام میتوانید پیغام بگذارید
Nothing new in this video or I missed something?
Read video title and description
It is not easier to solder PET tape.
Not too hard
Agreed! Would be awesome to see an attempt at joining PET tape before it enters the the filament extruder
Wow man, this thing is awesome! But you don't explain how it works really well... You are posting a lot of this video showing the same thing, it seems you are just farming views using an interesting concept that maybe isn't real? Show how it works!!!
Thank you dear friend for your comment, I did not understand what you mean, each video shows specific details of the production process (inserted in the video title) and also a model is printed at the end of the video