This is the quickest way I removed my broken door handle on a 2004 2006 endeavor. Pls proceed at your own risk and enjoy the video. Thank you for watching!
This is the best video I have found on removing door handle and panel from a Mitsubishi and trust me i’ve watched them all. I’m actually reviewing again to do the passenger door and again i’m back to this guys vid thanks for posting.
Getting the 10 mm bolts out was super fast..BUT.. getting the ones in the center and to the right side back IN...well, I STILL can't get those little buggers back IN.
Dude you forgot to mention that getting 2/3 bolts back in are virtually impossible. Either they are too short for the length required or the minimal space within the window area stops you at almost every turn. This was difficult, but I do have very large hands aswell.
Great video. Thank you. The only thing I wish I knew before starting is what size gear wrench you used and what size socket or sockets...? Anybody know?
Hey Tatts...hope all is well with you and ours during this crazy time! I'm hoping you still have that endeavor and if you do I have a Quick question for you after a little background. In short, I just replaced the heater core...ugh right! I have it all back together other than the radio face which has been on but removed after my initial attempt at starting the car. Here's the question, could you shoot a few pics of the electrical connections after the fuse panel? I also have a ground that I cannot figure out where the hell it goes. It's back behind the radio, a single black wire with an eyelet that won't reach to anywhere but the back of the radio itself. So if you ever have that apart I'd love to see those as well. All in all, after putting back together it will not turn over, no horn, lights, radio. The interior lights work, headlight warning once key is out works but no lights, turn signals did work but now don't, hazards work...oh and I have an extra connector behind the radio that seems to have lost its mate! This is soooo dam frustrating but hoping you could help if at all possible would be very much appreciated. A couple of your other vids have helped!! The door handle vid really helped!!!! Enjoy your pursuits and stay safe!!! C
This is the best video I have found on removing door handle and panel from a Mitsubishi and trust me i’ve watched them all. I’m actually reviewing again to do the passenger door and again i’m back to this guys vid thanks for posting.
Kim Brown thank you glad I can help.
Great brother thank u...literally REVERSE
.JUST DID IN 15MIN..START TO FINISH..YOUR N ANGEL MY MAN
Alright thanks man you helped me and my dad out.😄
Sircalvin Cooper My pleasure bro! Glad it helped.
Getting the 10 mm bolts out was super fast..BUT.. getting the ones in the center and to the right side back IN...well, I STILL can't get those little buggers back IN.
I used a small 10mm short ones with tape attached to it so it wont fall out :)
Dude you forgot to mention that getting 2/3 bolts back in are virtually impossible. Either they are too short for the length required or the minimal space within the window area stops you at almost every turn. This was difficult, but I do have very large hands aswell.
I thought I covered best I can, my apologies. Ty-
Great video. Thank you. The only thing I wish I knew before starting is what size gear wrench you used and what size socket or sockets...? Anybody know?
Thank you Kurt, sizes I used is all 10mm wrench and socket.
Appreciate it
Hey Tatts...hope all is well with you and ours during this crazy time! I'm hoping you still have that endeavor and if you do I have a Quick question for you after a little background. In short, I just replaced the heater core...ugh right! I have it all back together other than the radio face which has been on but removed after my initial attempt at starting the car. Here's the question, could you shoot a few pics of the electrical connections after the fuse panel? I also have a ground that I cannot figure out where the hell it goes. It's back behind the radio, a single black wire with an eyelet that won't reach to anywhere but the back of the radio itself. So if you ever have that apart I'd love to see those as well. All in all, after putting back together it will not turn over, no horn, lights, radio. The interior lights work, headlight warning once key is out works but no lights, turn signals did work but now don't, hazards work...oh and I have an extra connector behind the radio that seems to have lost its mate! This is soooo dam frustrating but hoping you could help if at all possible would be very much appreciated. A couple of your other vids have helped!! The door handle vid really helped!!!! Enjoy your pursuits and stay safe!!!
C
I also replaced my beater core on my 2004 mitsubishi endevor
How about a video of the driver's door main harness replacement, these are a problem on many of these models.
Sorry sir I haven’t encountered the issue.
This video would be great if there wasn't a door panel and electronics to remove before it starts
Which is why this video is terrible
Do you have a video of installment?
Jessica Roper hi Jessica I am sorry I don’t, just reverse the process...
Just REVERSE ORDER LITERALLY
will this work for a 2008
Hi Eric, might be similar procedure.
What's the size of the stubby??
Hi chantel, it is 10mm.
Working on the 2007 endeavor is not the same
Great video, I give it a thumbs up although I see there are 4 donkeys, whats there to dislike
ThAnk you kindly 🙏.