USA - DIRECTION ARROW IN 5 MIN!

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ธ.ค. 2024

ความคิดเห็น • 82

  • @user-fs5lc2dl7t
    @user-fs5lc2dl7t ปีที่แล้ว +3

    These workers have done this a time or two. Good work guys!

  • @ao11861
    @ao11861 2 หลายเดือนก่อน +1

    If you've seen it done faster its probably a different material. This is thermoplastic. Its 400 degrees. Paint or polyurethane can either roll on or spray on because they are applied at a much lower temperature. What is being thrown are tiny sand like beads of glass that stick to the plastic as it is melted and begins cooling to a hardened state once applied. The glass beads work to make the arrow reflect a vehicle's headlights. The beads were blown off at the end to prevent vehicle tires from losing control. That machine he is using is called a handliner and the 400 degree material is loaded into it from that truck you see next to them which maintains TONS of material continuously melting at 400 degrees. This job is not for the weak. Any off that thermo gets on your skin it will literally melt your skin off. Its 400 degree white lava. Did i mention this machine weighs 300 pounds WHEN EMPTY. He's pushing weight ALL FUCKING NIGHT.

  • @jimoday2078
    @jimoday2078 ปีที่แล้ว +11

    When I worked pavement some 50 years ago, we'd slap down a plywood arrow stencil and one man poured in paint while the other spread it with a long-handled roller. We'd be done in 30 seconds and pick up the stencil and move on. No pricey equipment. I guess we didn't know any better.

    • @larryrobinson08
      @larryrobinson08 ปีที่แล้ว +1

      Them were the good d days.

    • @grissom2023
      @grissom2023 ปีที่แล้ว

      Too much money to be made these days.
      Many years ago a road was dug up so a utility company could do some work.Then another co came by to collect all the rubbish.Another co came to put safety barriers around the hole.A week later a diff co came to fill in the hole.The safety barrier co then came to collect their barriers.
      A week or so later the exact spot in the road was dug up for another utility company😂😂😂😂👍🇮🇪🇷🇺🇷🇺

  • @ao11861
    @ao11861 2 หลายเดือนก่อน +1

    We used to use this handliner back in the day. We use a different model but same concept. 50 bucks or more per hour. Plus paid winters off. Love my job.

  • @larryrobinson08
    @larryrobinson08 ปีที่แล้ว +8

    First guy placed the stencil, second guy picks it up, moves it, puts it down, and then picks it up puts it right back where the first guy set it. What’s up with that?

  • @ecolenakles
    @ecolenakles 3 ปีที่แล้ว +5

    Nice well kept equipment

  • @scopex2749
    @scopex2749 ปีที่แล้ว +1

    BRILLIANT!

  • @lailaleasiolagi8924
    @lailaleasiolagi8924 2 ปีที่แล้ว +19

    That’s my dad

    • @GabrielHernandez-gi5db
      @GabrielHernandez-gi5db 2 ปีที่แล้ว +2

      I work with you dad at pci. I must say, your dad is real cool peeps

    • @RC-90605
      @RC-90605 ปีที่แล้ว +3

      You should be proud. Working out in traffic can be dangerous sometimes.

    • @fluxington
      @fluxington ปีที่แล้ว +1

      That's your Mum.

  • @patrickr.452
    @patrickr.452 3 ปีที่แล้ว +2

    Thats was so satisfying to watch!

  • @angelanunez3726
    @angelanunez3726 2 ปีที่แล้ว +9

    That’s my baby daddy!! 😃 your work has always been on point. You’re such a dedicated worker! Keep up the good work.

  • @thesealerguys
    @thesealerguys 3 ปีที่แล้ว +6

    Just bought a couple pro melters for doing minor work around intersections after utility companies break ground where are you guys getting your metal stencils from are they custom-made I noticed you have the same types on the trucks that are around here was just wondering if you guys ordered them from somewhere

  • @QueensStandUp
    @QueensStandUp ปีที่แล้ว

    Nice sharp work. Thanks for the video.

  • @victorubiano
    @victorubiano ปีที่แล้ว

    Congratulaciones súper mens

  • @mimigarcia6075
    @mimigarcia6075 2 ปีที่แล้ว +1

    That's right Frank!!! Thats my boy right there :)

  • @juangodinez8237
    @juangodinez8237 2 ปีที่แล้ว +1

    None other than Frank .great work.

  • @joshuakelly974
    @joshuakelly974 3 หลายเดือนก่อน

    What is that you use for the straight edge on your arrows? I’m trying to get away from using foil back tape

  • @AlabanzasyAdoración7
    @AlabanzasyAdoración7 2 ปีที่แล้ว +1

    Where can I get those stencils?

  • @DamnShaneO
    @DamnShaneO ปีที่แล้ว +2

    What is that powder that’s thrown onto it?

    • @adamcanningvlogs3608
      @adamcanningvlogs3608 ปีที่แล้ว +3

      Beads it’s for reflection

    • @DamnShaneO
      @DamnShaneO ปีที่แล้ว

      @@adamcanningvlogs3608 thanks!

    • @Peter_Riis_DK
      @Peter_Riis_DK ปีที่แล้ว

      @@DamnShaneO
      Glass. A nice thing to have blowing around in nature.

    • @dougaltolan3017
      @dougaltolan3017 ปีที่แล้ว

      ​@@Peter_Riis_DKsand

    • @timhinchcliffe5372
      @timhinchcliffe5372 ปีที่แล้ว

      Cocaine... it's part of the city's effort to reduce the homeless population by attracting them onto the street to get run over.

  • @80PercentAshamedOfU
    @80PercentAshamedOfU ปีที่แล้ว

    Atlanta turn arrows: “Not yet….not yet…..still too early….little closer to the intersectionnnnnnnnnnnNOW!”

  • @raztaz826
    @raztaz826 ปีที่แล้ว

    I'd like to have a go some day

  • @techtinkerin
    @techtinkerin ปีที่แล้ว +1

    Bet that cart would be great for doing graffiti 👍😄

  • @jacecobert8268
    @jacecobert8268 5 หลายเดือนก่อน +1

    and they charge the city/state anywhere from 350$-600$ for that arrow. A lot of money in this stuff trust me I do it.

  • @joeblogs5163
    @joeblogs5163 ปีที่แล้ว +1

    Any good for doing burgers?

    • @timhinchcliffe5372
      @timhinchcliffe5372 ปีที่แล้ว

      Depends, how do you like your flame grilled road kill?

  • @timhinchcliffe5372
    @timhinchcliffe5372 ปีที่แล้ว +1

    Lots of haters in the comment section... Wtf. 🙄

  • @alanwood4968
    @alanwood4968 ปีที่แล้ว

    How long does it last 10minutes?

    • @fluxington
      @fluxington ปีที่แล้ว

      How long does it last 4minutes51seconds?

  • @tristiangibson7668
    @tristiangibson7668 4 ปีที่แล้ว +4

    That is so quick i was first

  • @Kropek.310
    @Kropek.310 ปีที่แล้ว

    instead of placing a board with a drawn template and painting it, they paint one sign for several minutes😂

  • @erikthomas7201
    @erikthomas7201 6 หลายเดือนก่อน

    What took so long? 😂

  • @Beee_Ceee
    @Beee_Ceee 3 ปีที่แล้ว

    Looks like Frank doing his thing

  • @augustoortega2767
    @augustoortega2767 4 ปีที่แล้ว

    Carajo !

  • @rebapuck5061
    @rebapuck5061 ปีที่แล้ว

    Seen videos without the heavy equipment using one man and an applicator.

  • @dereckjtbear2175
    @dereckjtbear2175 ปีที่แล้ว

    PS: Take a look how the Swedish do lines/ Arrows.

  • @romeowhiskey1146
    @romeowhiskey1146 ปีที่แล้ว

    They went THAT A WAY ---------------------------->>>>>>>>>>>>>>>>>>>>>>>>

  • @petenikolic5244
    @petenikolic5244 ปีที่แล้ว

    A machine for that humm should be doing those freehand

  • @Tmthy-yu3nj
    @Tmthy-yu3nj ปีที่แล้ว

    Just work alone?

  • @空姐愛七桃
    @空姐愛七桃 ปีที่แล้ว +1

    中國技術,名揚四海!👍👍👍👍👍👍

  • @blancopolar4674
    @blancopolar4674 8 หลายเดือนก่อน

    🙏👏🙌🇻🇪💰😭

  • @2wheelsOrDieNC
    @2wheelsOrDieNC 7 หลายเดือนก่อน

    Only thing i see could b more efficient for operator is casting beads. Can you not "drag" the automatic beader at the end of a pass so u dont have to hand cast? And 2nd pass on head...y hand cast at end of 2nd pass when 3rd pass covers it? I do things a little different but your arrow looks good brother.

  • @WorlTramp
    @WorlTramp ปีที่แล้ว

    I’m sorry to blow your bubble. I’ve seen people do this with a roller in less than 90 seconds

    • @LugnutsK
      @LugnutsK ปีที่แล้ว

      That's not thermoplastic that's just paint

    • @billyr1
      @billyr1 ปีที่แล้ว +1

      Not with hot plastic you didn’t.

  • @nater6104
    @nater6104 ปีที่แล้ว

    My striping company I work for rn could finish this all in a minutes😭 I’m not so sure what the hype is about😂

  • @TonyLinSh
    @TonyLinSh ปีที่แล้ว

    What a waste. A whole arrow template will do the job much quicker.

  • @grissom2023
    @grissom2023 ปีที่แล้ว

    Wouldn't it be cheaper and easier to do that by hand?.
    No need for expensive equipment.
    1 or 2 men and a truck.
    Maybe that's too simple and all the bosses wouldn't make $millions?
    👍🇮🇪🇷🇺🇷🇺

  • @barrel_is_hot
    @barrel_is_hot ปีที่แล้ว

    Sloppy work, look at the point at the top of the head where he didn't line it up right, we do it much better in th UK... just sayin

  • @stukaman1162
    @stukaman1162 2 ปีที่แล้ว +2

    Typical no-care city employees. Lousy lines are not what people paying exorbitant gas taxes want to see.

    • @ghost307
      @ghost307 ปีที่แล้ว +2

      It's actually being done by a private company, but it's being done to CALDOT's typical half vast standards.

  • @Peter_Riis_DK
    @Peter_Riis_DK ปีที่แล้ว

    Sorry, mate. But I've seen it done smarter and faster.

    • @OneOfThoseTypes
      @OneOfThoseTypes ปีที่แล้ว

      Not done by foreigners obviously.

    • @Peter_Riis_DK
      @Peter_Riis_DK ปีที่แล้ว

      @@OneOfThoseTypes
      Don't know what your point is, Bub - I saw it in Italy.

    • @OneOfThoseTypes
      @OneOfThoseTypes ปีที่แล้ว

      @@Peter_Riis_DK Then it would have been completely automated.

    • @Peter_Riis_DK
      @Peter_Riis_DK ปีที่แล้ว

      @@OneOfThoseTypes
      No.

    • @OneOfThoseTypes
      @OneOfThoseTypes ปีที่แล้ว

      @@Peter_Riis_DK LOL, I seriously doubt that.