Old Grease Gun Restoration | Mister Patina
ฝัง
- เผยแพร่เมื่อ 30 ม.ค. 2021
- My Facebook: / misterpatina
Instagram: / misterpatina
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-)
Thanks for watching!
Old Grease Gun Restoration | Mister Patina
In this Video i restored an old Grease Gun for my lathe! I disassembled the grease gun and restored every part. The main body got a cold bluing finish and the tip was brass coated. After reassembling this grease gun it works perfectly again! - บันเทิง
The brass wheel and flame torch was a neat little trick. Loved that! Never seen that done before.
Hey Luke, iam glad you enjoyed! :-)
You can also heat up the part and hit it up with a brass wheel for the same effect!
That’s right!
@@misterpatina german engineering always get me....
That was really new, never seen that, only knew "flammspritzen" with aluminum
Very very interesting. The brass coating was completely new to me. Thanks for teaching me yet another time
Mostly welcome Bro! :-)
That's what I call a great start to the day with a video of you! Again, of course, a great result and the way you proceeded is great!
Hey Bro, thanks a lot! Iam glad you enjoyed! :-)
I believe that’s actually where you oil the lathe . But if you want to grease it, who am I to judge. Like your videos though.
yea, I think you might be right. the grease would only clog up the oil channels. but then again, I don't know this specific lathe. maybe it uses grease instead.
Learned a new trick, brass coating with fire ,i think i'm going to use it on my restorations. Thank you mate, and obviously another wonderful restoration! Greets from Veneto, Italy.
Hey Sebastiano, iam glad you enjoyed and learned something 🙂
Best greets from Frankfurt, Germany!
Excellent restoration job!
BTW that's not a grease nipple on the tailstock, it's for applying way oil.
Always impressed with your metallurgy skills.....Nice.👍
Who thinks these videos are so satisfying 😍😍
Thanks! :-)
lol I giggled when the sandblaster whistled at 3:57. It's really childish but that made me smile.
Haha, iam glad you enjoyed!
Another beauty restauration of a precious tool.
Thanks!
Beautiful restoration, you did a very good job.
Thanks a lot Tyby! :-)
Great video! Pretty cool trick with the brass plating. I have never seen that done before. I’m looking forward to your next project, sir. Until then, be safe.
Hey B! Yeah you never stop learning :-)
Thank you so much! You too!
My father had a grease gun almost like yours, except that it was brass, the knurling was finer, and the tube had a slight angle. It was the first tool he taught me to use. It was used on the spring cap type of grease point (in the late 1940s). A very enjoyable project.
Lovely restoration thank you for uploading it. All you need now is some old grease and you'll be away!
Ah, so you also make new ones?, I see you are a man of culture as well...
Auf jeden Fall auch hier ein Daumen hoch da lasse Meister Haft ❤️👍❤️
That's what I call a great start to the day with a video
Haha, thanks Artemus! Iam glad you enjoyed!
What's real cool about this is that it's actually a useful tool for you. Bravo
Dude I literally cried at the „sup“ 😂😂
In questo mondo rumoroso, grazie per il silenzio e la tua arte!
Aweso refurbishment and upgrade plus the "brassing" technique was surprisingly new to me. 👍👍👍👍
Hello very good restoration well done
Thanks Vince! :-)
Another restoration made usable. A mate for the one from Dr Beer 🍺 👍
Restauration Tips!
Mister Patina, TYSY Tube and My Mechanics, 👍🏻 enough said
Mensch da war ganz viel “Schnodder” drin🤔😉🤣🤣
Haha, thanks a lot! Ja, da war einiges drin und dran...:D
@@misterpatina oops! Habe 2 mal gepostet 😉😂🤣
Great greasy restoration.
Thanks Verna! 🙂
Like everyone else, I thought the brass coating was a really neat trick. I personally would have repainted the body with blue Hammerite paint like the original paintwork to take it up a notch in aesthetics. Great job again.
Awesome job love the part with brass wire wheel!!
Hey Todd, thanks! I’m glad you enjoyed 🙂
Nice👍🏻
Thanks Bro, really appreciate!
Thanks for posting. Mine just ran out
Well, I suppose I'm amazed at the brass coating "as by fire" like your other viewers have indicated! Great restoration as always. The new tip was good as well. Great work with the lathe Mr P. Thank you.
Hey Roger, thats a sweet little trick! its totally easy, you should give it a try!
@@misterpatina yes sir, I plan on it sometime! Thank you
Looks very good and doing nice job 🌹🙏🏻
Thanks a lot Radha!
Another quality video, man! Excellent work! Keep it up! 🤘
Hey Andy, thanks a lot man! :-)
"Knees weak grease spaghetti"! 😂😂😂
Thank you 🌷✌👏👏👏👏👏👏👏
Some old things can be hot again with some modern time modifications,
Pump it up bro!!!
True story! Thanks for watching! 🙂
I'm shocked that there was no rust :). Plus, your lathe got taken care of!
Nice ....
Thanks Ummah!
@@misterpatina You're welcome mister
Nice and late to the party (as I’m well known for) but very nice job! I’m digging the new tip you made - that lathe is a life saver. Your grease gun collection is growing fast it seems haha
MMMmmm! Tasty video! My eyes thank you :)
Haha, you’re welcome Bro!
...good one, nice job, stay safe,,
Thanks Bob, you too! :-)
Nice work, the brass plating turned out great👌
Thanks a lot Bro!
Perfect restoration for a perfect tool. Nicely done!
Hey Gayle, thanks a lot!
10:48 very nice
Thanks a lot! :-)
That brass brush trick is a technique that blacksmiths use to give their forgings a nice brass coating.
Sehr sehr gute Arbeit 👏🌹
Danke Haydar! :-)
I'm agree with u big holes are big problems 😂
Очень интересный выбор для видео. Классная реставрация👍
Spasibo Bolshoye! :-)
Nice job,even the bluing is nice as a color,well done again !
Thanks a lot Bro!
Excelente como todo lo que hace señor!!!!! Dios lo bendiga como siempre por su inteligencia y por compartir.
No pets! Yes! Like for a nice job
Haha, thanks! 🙂
Nice work, i too loved the bit with the brass brush, will try this, thankyou.
Youre welcome Tony! :-)
Que hermosa restauración.
6:37 Sehr cool! 😁
Dude that was great !
Thanks Justin!
Perfect job!
Thanks Gustavo!
Amazing, as always! The brass coating was really neat.
Nice touch, Bruder!
Keep it up!
Haha, thanks a lot Brat, i definitely will!
Wieder mal ein schönes Video. Der Trick mit der Messingbürste ist in der Tat ganz interessant. Mach weiter so, machst das dufte 👌
Tausend Dank! Musst du unbedingt mal probieren, ist ganz einfach. Muss auch nicht zwingend mit der Bohrmaschine sein, geht auch mit einer händischen Messing-Drahtbürste 🙂
@@misterpatina ich bin nur im Holzbereich unterwegs. Deine Videos sind einfach mal eine willkommene Auszeit 🙃
Fantastic job it looks and works great thanks for sharing 🍺🍺👍👍😷
Thanks Brian! 🙂👍
That's quite a find. Amazing restoration too.
Thanks! 🙂
1:43 nutella chocolate flavoured 😋
Haha 😄😄
Ich find die Methode der Messingbeschichtung cool, aber ich finde, dass das Teil jetzt nicht zum Gesamtbild passt. Auch das Oberflächenfinish des vorderen Teils könnte noch einen Tick glatter sein. Aber das Ergebnis ist trotzdem klasse 👌
Danke danke! Ja das Projekt war eher eine „Spielerei“ für mich, da es ja wirklich mal ein Gebrauchsgegenstand für die Werkstatt ist und nicht wie der Rest in der Vitrine landet 😄
Dennoch danke für deine Anmerkungen! 🙂👍
I know the video is old. But FYI you should NEVER USE GREASE on your Lathe or Milling machines.
Heating the wheel instead of the part seems a bit more safe than handling hot parts . I thought the flame would go out from the rotation
Sweet 👍🏻 👍🏻
Hmm, a nice job on the grease gun, but you don’t grease a lathe, you oil it. Les
Good job 👍👏
Thanks Mat!
Bună, frumoasă și de calitate treaba!!!!!!
Good job 👍 awesome restoration 👌🏽💥✌🏻🇷🇺
Thanks a lot! :-)
Lovely as always! One really nice thing about this restoration is that you can repurpose all that old grease - You now have (approximately) a years supply of top notch hair styling cream!
Isn't sandblasting the greatest? I go back and forth between which is more satisfying; power washing or sandblasting?
Kickass bro
Haha, thanks Tim!
Great work my friend!👍🏻🎬
Thanks Bro!
Muy interesante !!
Perfect
Thanks Annette! 🙂
Turned a grease gun into a grease sniper rifle... 👍
Haha, thanks David!
I would love to se e you make an entirely new grease gun like this on the lathe from scratch!
Haha, I thought about that Shane! 😄
Felicitaciones! Saludos desde Baja California, Mexico
10:00 Mmmm, forbidden apple sauce...
Very nice. I'm glad you didn't paint it.
Thanks Dave!
Very nice work dude!
That was pure filth! I'm very surprised that TH-cam's 'norty' algorithms didn't block it 🧡
Haha! No problems with the algorithm yet :-)
Thanks for watching Deena!
Nice job Bro! 👏👏👏
Thanks a lot man! ❤️
I recently filled one of these with oil. My Lathe got grease nipples on all sorts of places and I’m kind of sure these aren’t meant for grease.
*Knees weak, grease spaghetti... mr patina made a messy* 😂 Wonderful job sir!
😄😄😄
Thanks Bro! 🙂
Cool!
Thanks David!
Yummy ice cream 🍦grease flavoured 😋
The restoration is better with slow moves from the restorator?
Very Well..!!my Friend...ji ji j i...Saludosss
Thanks Jale!
krass die idee mit der flamme und der messingbürste.
das habe ich so noch nicht gesehen👀👍
das stellt sich mir die frage...
ist das nicht sogar eine indirekte variante des kaltschweißverfahrens?
gutes video ... man lernt nie aus.
Hey, freut mich dass es dir gefallen hat! Ich würde es am ehesten als "Beschichtung" definieren, da die Stoffe keine chemische Verbindung miteinander eingehen. Also auf gut deutsch: das Messing "liegt" nur auf dem Eisen. Aber ganz ehrlich, genau erklären kann ich diesen Prozess auch nicht, finde es aber ziemlich cool und es ist recht schnell gemacht :-)
@@misterpatina
ich hatte nur diesen gedanken...
da das gleiche ja beim feilen passiert.
so bald ich mit einer feile stahl oder andere metallische werkstoffe bearbeite und sich die feilenzähne mit den spänen zusetzen,wird die ziehmlich feste verbindung kaltschweißen genannt.
dabei verschmelzen die werkstoffe auch nicht.
sind aber so gut wie unlösbar.
daher kam meine frage.
trotzdessen ... cooles video.
@@-Andreas ja das scheint sehr sinnig zu sein. Nennen wir es so :-) Musst du unbedingt mal ausprobieren, der Effekt ist richtig cool! :-)
@@misterpatina
das hab ich auf jedenfall im kopf abgespeichert und werde es auch ausprobieren.
ich sag ja ... man lernt nie aus
👀👍
aja ...
da hab ich ein tip für dich.
das zusetzen einer feile mit spänen verhindert einfache schulkreide (tafelkreide).
vor dem benutzen der feile einfach draufreiben und die teure feile bleibt länger benutzbar.
Epic video
Thanks! 🙂
Wait...you transferred the brass from a brass brush to that nozzle with just heat and friction? Will the brass stay adhered? What magic are you performing here?
Yeah I did. The brass can be removed with heat and friction again. But with regular use it will stay 🙂
Why does industrial grease always look so yummy?
...but tastes so bad? 😄
Wow! how does that brass coating work? why does it stick?
Because of the heat
It's like brazing
@@koen_bakker is it bonding or reacting with the underlying metal though? why does it not just fall or rub off?
Could you mount a silicone or rubber o-ring on the end of the tip for a better seal?
Oh, i really did afterwards, altough it wasnt really leaking a lot! :-)
Wow! This is what I needed! This, as always, is absolutely amazing... Let me guess... You got it from Ebay? :-D
You did a great job making the tip too! Coming from a machinist, You did a great job!
(Edit) One thing, You dont put grease in lathe's tailstocks, you put Way Oil (Iso65) because it is sticky... Otherwise... You are absolutely wonderful at restoration! Also, where did you get your lathe from and what company is it... If you can find a manual, ready it as it should (Hopefully) say what oils and greases to use :D
(Sorry, another edit, I have lots of questions) What oftware do you use to edit your videos? They look jaw droppingly good! Also, I didnt know that you could brass coat things... I am definitely going to use that! One last thing... Your lathe tool is sticking out a lot! But somehow your talent makes it better!
نريد معرفه جهاز التنظيف
We want to know about the cleaning device
Very cool indeed... Hmmm, will the colour on the metal casing chip off over time? Not familiar with the lindseed oil & bluing agent combimed...
Great vid.
Fan, Sydney Australia.
Hey B! Its basically not a color, its cold bluing. Its a chemical reaction which creates a layer of black corrosion, which makes the stell rustfree. So it wont chip off ;-)
Hope i could explain it understandable.
Thanks a lot! Greets from Frankfurt, Germany!
@@misterpatina thanks mate. 😉
That’s definitely right and really important! Thanks for the addition, Matthias 🙂
@@matthiasweigel311 Danke..
Before starting with disassembly you need to level the work surface. :-)
Красава