Schön, dass Du die Messingplatte nicht bis zum Spiegelfinish poliert hast. Das erhält den Charakter von solch alten Werkzeugen und macht Deinem Namen alle Ehre. 😜
Remember the hotest part of the torch flame is were the light blue cone ends, inside that cone there is only hot air. This tip will make your heatings more efficient. Good luck.
Greetings from Petersburg! My friend, you deserve congratulations more than anyone else. Happy Blogger Day! Prosperity, stability and inexorable growth of subscribers to your channel. A channel through which you can learn and which brings us positive, information and good mood.
My dear friend. I watched all your videos. I noticed that you increase your mastery level by constantly developing new techniques with each video. I congratulate you for this. Also, thank you so much for teaching me something new in each of your videos. I wish the continuation of your success. Loves from Turkey.
Man, you lucked out on this one. It obviously needed work but for the most part it actually had good parts. Doesn't mean I didn't love the video. Keep up the good work.
That setup for straightening 7:40 the curved end of the housing. This is why I love watching restoration videos. In about 15 seconds I learned a new technique for repairing tricky bent sheet metal parts that was easily set up and performed beautifully. Thanks for the tip!
Great restoration and it looks like new again and you did a wonderful job restoring it!! Enjoyed your video and I gave it a Thumbs Up for the support of your channel
Hey, guys, thanks for showing me every detail. I really liked every detail you did, until I watched it with the highest resolution🍻🍻🙇🏻♂️. Because I like to see your prudence at work, and I say it's incredible. Keep it up, guys.👍🏻💪🏻💪🏻🍻
On the scale of things, this scale weighs in just nicely. It's the exact model my mother had in her kitchen, if I recall. It's a killer gram of a restoration, and that scale should now be worth pounds!
Funny how such a small thing came be so interesting to watch. Fantastic job (no surprise). That spring must have been a pain to get back on though. As always, great content! Thanks for the video. Be safe, sir.
Thanks for tuning in! I wish you a lot of fun with the video - and I hope you like it 🙂
It was super sweet!
du hast immer die besten Untertitel, mach weiter so bro
Schön, dass Du die Messingplatte nicht bis zum Spiegelfinish poliert hast. Das erhält den Charakter von solch alten Werkzeugen und macht Deinem Namen alle Ehre. 😜
Beautifully done guys 👍
Posted 39 secs ago!, last time I was this early i was....wait. A wizard is never early nor is he late. He arrives precisely when he means to
Haha, thanks! 🙂
Alright gandalf calm down lol!!
@@343GuiltySparkinst04 😄
Yerrr a wizard ‘arry.
My dad had this exact same one when I was little. I remember pinching my finger on it once.
I too was impressed with just how accurate it was - that spring must have been treated very well. Great work, Mister Patina!
Thanks a lot Chris!
Remember the hotest part of the torch flame is were the light blue cone ends, inside that cone there is only hot air. This tip will make your heatings more efficient. Good luck.
Parole de plombier ! 👍👍👍❤️❤️❤️👏👏👏👏👋🏻👋🏻👋🏻 Vous avez entièrement raison ! 👍
Hi mister Patina beautiful restoration good job friend enjoyed the video
Thanks Vince!
Super restoration. Thanks for sharing
Thanks!
Hell yes Mister Patina. Nothing better then waking up to a new video.
Haha, you’re welcome!
Greetings from Petersburg!
My friend, you deserve congratulations more than anyone else. Happy Blogger Day! Prosperity, stability and inexorable growth of subscribers to your channel. A channel through which you can learn and which brings us positive, information and good mood.
Thank you so much man! Especially for all of your support! :-)
@@misterpatina :))
Чудове відновлення,як і всі решта Ваших робіт!!!
Дуже дякую! :-)
A pretty little restoration! Good to see that dolly can still give a helping hand. 😁🤚
Haha, thanks Linda :-)
Cold blueing is so satisfying to watch! Great job once again
Its pretty satisfiyng to do it :-)
Super precious finishing of the surfaces. Joyful to watch your work! Thanks, MP!
Thanks for watching!
Mister Patina keep going like that . Your content is soo good . All the best 👌
Thanks my friend!
Ooohhooo,I love this content,I feel so nice while watching your videos !!! 👍👍👍♥️♥️♥️
Hey John, iam glad you like it!
Lavoro ben fatto e accurato, complimenti 👍👍👍👍👍
Mille Gracie 🙂✌️
Harika bir restorasyon oldu, tebrikler dostum. Günümüzün teknolojik aletlerinden daha güzel bir aletmiş.
Çok teşekkürler!
Nice little project! And the little helping hand was there again, how nice! Have a great Sunday! 🌞
Thanks a lot, same for you
Отличная работа 👍👍👍 как всегда на высоте, молодец
I really like the Kovax sanding cube!!
....lookin' good, nice job, keep well...
Thanks Bob!
we loved this programme and all your others . danke
Thanks a lot! :-)
A next very good Job very cool Video war wieder echt interessant und natürlich wie bei dir gewohnt einfach eine perfekt umgesetzte Restauration ❤️👍❤️⭐
Hey, danke!
I have to watch yuor videos 2 or three times, falling asleep:) . So relaxing, thanks
Haha, thanks!
Bravooo, best perfect work, abs. awesom video and work precision, full respect...!
Ahoi Mister Patina, your Restoration was a Success Awsome Video Keep going my Sailor Patina 😁👍🏻
Haha, iam pretty happy everytime i read your comments! :-)
@@misterpatina i know you Do Bro. 🤙🏻☺️
Комментарий в поддержку канала и ролика, а также труда мастера.
Spasibo!
Dedicated Work and Clean Work.
Good Job!
Thanks!
Great Restoration on an lovely antique item 👍😊 and you preserved that old look 👍 Great !!
Thanks mate!
Another well deserved like. Thank you for your content.
Thanks for watching! 🙂
I love your content. It's always relaxing and inspiring. 🥰🥰🥰
Thanks a lot buddy!
Nice work, I like all of your restoration. Greets from Poland ;-)
Thanks Mac, greets from Germany 🙂✌️
@@misterpatina THX 😉👍
My dear friend. I watched all your videos. I noticed that you increase your mastery level by constantly developing new techniques with each video. I congratulate you for this.
Also, thank you so much for teaching me something new in each of your videos.
I wish the continuation of your success.
Loves from Turkey.
Hey my friend, thank you so much for your support! Hugs from germany!
Very nice job. Still has the vintage look.
It's interesting how someone calculated dimensions for the spring to keep it accurate through the span of weights. Your work is very good.
I totally agree! Thanks a lot!
Hey, mein Bruder!
Sehr toll wie immer!
Grüssen aus Moskau!
Danke Bruder! Grüße aus Deutschland ✌️
Precision always deserves respect 🫡
Thanks! 🙂
Man, you lucked out on this one. It obviously needed work but for the most part it actually had good parts. Doesn't mean I didn't love the video. Keep up the good work.
Hey, I agree. The condition wasnt too bad. Thank you :-)
awesome restoration, I really like the color at the end!
Thanks man! 🙂
Clever to see you using that tiny hammer from your previous restoration to fix something cool! Love your work as it's inspiring! Keep up good work! :D
Thanks, iam glad you like my stuff :-)
That setup for straightening 7:40 the curved end of the housing. This is why I love watching restoration videos. In about 15 seconds I learned a new technique for repairing tricky bent sheet metal parts that was easily set up and performed beautifully. Thanks for the tip!
Thanks man, iam glad you like my work!
That squeaking sounds like me getting out of bed lol, great video mate 😁👍
Haha, thanks Roger!
You could paint the top of that weight indicator red or orange. Just that needle sticking out!!! Greetings from Serbia!!! 🇷🇸
Saludó desde la República Dominicana excelente vídeo
Thanks for uploading another awesome video. Great job. Thanks again.
Thank you for your support! 🙂
Good restoration mister Patina 👏👏👏
Thanks Ajdin!
Hot and cold bluing. You are spoiling us. ❤🙂
Haha, thanks Tabby! :-)
Sweet job mate, I love the look of the black letters with the brass, good call to do that 😄
Beste Leben
@@misterpatina 😄😄
New appreciation for these. Well done. 🇹🇹🇹🇹🇹🇹
Thanks!
Enjoyed the restoration. Thank you!
Thanks John!
You never fail,great looking scales.just needed a little loving.just keep doing what your doing and carry on 👍👍👍😎😎😎
Thanks Tom! Iam really glad you like it!
Great job.
Thanks Royo!
Excellent work as always sir. Congratulations on the baby.
Thanks Shawn!
Looks like a simple restoration of an antique item. Lovely job as always Mister Patina!
Thanks Mark! Yep, that was an 'easy' one 🙂
Impressive to see this smooth scale surface past restoration. Great work!
Thanks Tob!
Beautiful restoration, love the attention to detail!
Thanks man, iam glad you enjoyed 🙂
Nicely done as always, mein freund!
Thanks a lot mein Freund! :-)
Thanks for another great video 😊
Youre welcome Rick! :-)
So simple well made and designed..💡Always is a pleasure, watching your videos...😌🌟1️⃣👍
Thanks a lot! :-)
We had one of those. Took it fishing!
Hex Key Anvil 🔥
درود، بازسازی بی نقص و حرفه ای، همیشه ویدیوی کارکردن یک استاد که میداند چه انجام میدهد مرا هیجان زده میکند.
سلام ممنون از کلمات زیبای شما
@@misterpatina از توجه شما سپاسگزارم
Another “sweet” job. Congratulations.
Thanks Roger!
I've weighed so many salmon with a scale just like that. Nice to see one restored.
Hey, yes theyre pretty good quality :-)
Great restoration and it looks like new again and you did a wonderful job restoring it!!
Enjoyed your video and I gave it a Thumbs Up for the support of your channel
Thanks my friend :-)
@@misterpatina You're very welcome!
Hey, guys, thanks for showing me every detail. I really liked every detail you did, until I watched it with the highest resolution🍻🍻🙇🏻♂️.
Because I like to see your prudence at work, and I say it's incredible. Keep it up, guys.👍🏻💪🏻💪🏻🍻
Thanks man, I will!
Ooh nice! I have a small vintage diet scale from my grandma’s house back in the 80s. Might see if I can work on it
wow, good restoration! i like the cold blueing a LOT ;>
lets cold blue a waschbär
Very nice piece of scale, and also very nice restoration. I earn a few tricks today (as usual). Thank you!
Iam glad you did, thanks! :-)
Excellent - thank you! ✌🏻🎨☕️
Thanks Susannah! 🙂
Great video my friend and congrats 😉👌
Thanks my friend!
Muy interesantes tus vídeos saludos 👍
Good restore👍👍👍
Thanks man!
Bravo! Thank you!
On the scale of things, this scale weighs in just nicely. It's the exact model my mother had in her kitchen, if I recall. It's a killer gram of a restoration, and that scale should now be worth pounds!
Haha, thank you so much for your comment Mark! 🙂
P(o)un(d) intended? 😂👍
@@thorstenhulser5008 In ten years time, he'll be restoring my puns; mark my words!
It is punderstandable why you pundertook your punny comment. :)
@@PaulinaPaulino As you punder my puns, punder the pact that your name, Paulina Paulino, punderlines all of this! 😉
Love your work 👍
Iam glad you do! 🙂
Great job 👍 I liked it.
Thanks Robert!
That came out nice, although I think all your projects come out very nice.
Haha, thank you so much Nora!
Sweet, sweet, super sweet.
😄😄😄
That’s the way to go 😄
Very nice Restore and to bring it back to life other then in a land fill never to be seen again 👍
Thanks Frank!
Very nice work!
Thansk Michael!
Nice job brother. Like from India.
Thanks!
Хорошо блестят! И чётко показывают веса! ☝️🤓Теперь на рынок бери с собой, чтобы продавцы не обманули с весом товара (мясо там или овощи) ☺️
Привет спасибо вам! Ха-ха, да, я скоро это сделаю :-)
Another awesome restoration! 😊👍🏻
Thanks Bruce!
Congratulations to you and your significant other on your child here or to be born soon.
Thank you so much! :-)
Great job my friend! 😃
Thanks Bro!
Funny how such a small thing came be so interesting to watch. Fantastic job (no surprise). That spring must have been a pain to get back on though. As always, great content! Thanks for the video. Be safe, sir.
Hey B! I had the one and other fight off cam with this small piece...:D
And hey, thank you SO MUCH for your support at Patreon! I really appreciate!
Nice and clean!
Thanks my friend!
A pleasure to watch👍
Thanks buddy!
WOW really awsome 👍👍👍
Thanks!
Nice! Thank you!
🙂👍
Every nice
Great job 👍
Thanks Dave!
That looks lovely, dude! Excellent work!
Thanks Andy!
Love the restoration!
Iam glad you do buddy!
MY MOTHER HADE THE SAME TYPE A JOB WELL DONE
Super sweet 👍👍👍
Thanks Gareth! :-)
Nice Work
Thanks!
Wonderful 👍
Thanks!
Excellent!
Thanks man!
Midwives used to use these scales for weighing babies at at-home checkups back in the day
Interesting! :-)