Creality's Best Upgrade - Ender 3 Max Neo 3d Printer Review
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2024
- Creality has released their Neo series of the Ender 3, Ender 3 v2, and Ender 3 Max. This is my review of the Ender 3 Max Neo, where we look at the upgrades to both the hardware and the software.
---------------------------------------------------------------------------
Save 16% on an Ender 3 Max Neo using the promo code linked below:
Amazon US：
16% code(US only)：www.amazon.com/gp/mpc/A2M5DQJ...
Start Date：09/06/2022 6:00 AMPDT
End Date：10/05/2022 11:59 PMPDT
Find more information about the Ender 3 Max Neo:
Amazon US:
amzn.to/3Q9HmTo
amzn.to/3Q3ew7i
Amazon CA: www.amazon.ca/dp/B0B56FZK3B?r...
Amazon UK: www.amazon.co.uk/dp/B0B56FZK3...
Pergear: www.pergear.com/collections/n...
PEI steel plate(310*310 ): amzn.to/3R48NiF
Creality CR-PLA Matte Grey: amzn.to/3R7QZU3
---------------------------------------------------------------------------
Create a free profile at www.3dprintlog.com today, and start recording all your print settings and filament usage!
Settings and links to STLs:
Sample Benchy: www.3dprintlog.com/prints/88297
Torture Test: www.3dprintlog.com/prints/88574
Anometer: www.3dprintlog.com/prints/88951
James Webb Space Telescope Lithphane: www.3dprintlog.com/prints/89550
Desert's Kiss Dice Tower: www.3dprintlog.com/prints/90250
T-Rex: www.3dprintlog.com/prints/90696
Platform Jack: www.3dprintlog.com/prints/91184
Dinosaur Puzzle: www.3dprintlog.com/prints/91482
Low-Poly Charmander: www.3dprintlog.com/prints/92080
Pumpkin Gears: www.3dprintlog.com/prints/92161
Spaceship Spiral Vase: www.3dprintlog.com/prints/92316
TPU Calibration Cube: www.3dprintlog.com/prints/92932
Power Loss Calibration Cube: www.3dprintlog.com/prints/94026
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering TH-cam/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Alexandra C.
* Aaref A.
* Carl
Christopher Hoffman
Hoffman Engineering
www.hoffman.engineering
#Ender3MaxNeo #Creality3d #hoffmanengineering
[0:00] Intro
[0:27] Disclaimer
[0:44] Specs
[3:02] Easy Assembly
[4:02] Prints
[4:29] Print - Dice Tower
[4:51] Print - Platform Jack
[5:18] Print - T-Rex Skull
[5:34] Print - Spiral Vases
[6:47] PETG
[7:06] Flexible Filaments
[7:33] Filament Sensor and Powerloss Detection
[8:05] Issues
[9:19] Conclusion - วิทยาศาสตร์และเทคโนโลยี
I'm happy with mine that I got at a discounted price. I wish the fans were less loud, but that's an easy upgrade.
Thank you very much, I thought it was quite thorough and the project timings were helpful but I would have liked them on the technical ones too.
Your review are great. Could you please review the ender 3 V2 neo?
Hi, I bet that blobbing artifact was due to 'resume print after power outage' being enabled. I've seen that causes a slight delay when the printer writes the current position to the sd card, which results in a slight blob.
That T REX skull is badass!!!
Take the scraper with a hammer put it on the floor. Put your foot on front of the plate. Take scraper to buttom of back the print or supports. And one hit with with hammer to the scraper pops right off usually.
Hi im curious about the magnetic bed im not a glass bed fan any information would be greatly appreciated thank you
6:30 seems like the small pauses power loss protection causes after each "layer". Did you try with it disabled?
What size filament does it take to
Hot soapy water cleans most of the marks, and a good accessory for print removal is an Industrial Razor blade scraper, this gets the remove started cleanly, to be completed with the paint scraper. Also, let the bed cool for PLa print removal with greater ease.
I connected mine to the PC to print as my Ender killed off my memory card and won't recognise a new one I bought.
Though I did catch the USB cable connecting it during a long print and it ended up failing as there was no way to continue, also don't like the USB is the old Mini USB.
My main problem is the fan noise but I cannot find any vid showing an upgrade for the Neo Max, they all show the smaller Ender 3s with the power supply on the side vertically where the neo is underneath.
What can I do to get my ender 3 max neo print tpu?
hi did you try to print some face for example ,can you make real face to 3d and than printing ?
so TPU works on the ender 3 Max Neo? cuz the manual says it doesn't do TPU...
What size spring steel pei sheet should be used ?
what is the assembled size of the unit?
I don't want to say that I hate the glass bed, but I do dislike it. I was able to test and review the Max Neo and that was my biggest complaint, the prints stick hard. I did try putting it in the fridge recently and that helped but I don't want to have to pull the bed off and put in the fridge every print. The dual sided PEI sheets are great. Even the Creality E3 Pro PEI coated glass bed is fantastic but not available in the 300x300 size. Hopefully it will be eventually. I wasn't impressed with the manual bed leveling instruction and maybe it was my fault but I scratched the bed with the nozzle when moving to the first corner. It never said to loosen the springs and such. I wished they were a bit more detailed than saying to set Z offset and go to the corners. I thought the menu is a bit watered down vs the E3 Pro but I haven't used the stock firmware in a long time. I hope to be able to do my own firmware for this eventually but don't know what that will entail being a color screen like it is.
Very indepth comment, I appreciate it! I agree, the glass bed isn't my favorite. It is very grippy, though I think I found just the right nozzle height to where it grips enough, but I'm still able to get a scraper underneath without destroying the print or the bed. It took a few cut fingers and scrapes to find it. Creality does have a 310x310mm pei spring steel plate which does fit the ender 3 max neo (I have it linked in the description), but I haven't yet installed it on mine. It's bigger than the stated build area, but that's because the cr touch probe reduces the printable area a little.
I haven't tried any custom firmwares on these yet, but I'd have no doubts people will be making them soon.
Nice video and thanks for the info. I have now also bought this 3D printer. Now I wanted to download the Rex skull, but the file no longer seems to be available.
The Rex skull is thing:308335 on thingiverse, if the following link gets removed by youtube.
www.thingiverse.com/thing:308335
This is my first 3d printer. Have not set it up yet, so they work with iMacs. ?
How is it? Is the glass bed really as annoying as people are making it sound?
i cant get a good print out this thing with a 0.6mm nozzle,may as well get rid,i dont want a 0.4mm in it to slow,waste of money,doesnt run half as good as my ender 3 max.
they have it on sale atm £369 to £269
Can you put a sprite extruder on the neo?
I haven't tested it myself, but if you get the Sprite Pro kit, that comes with a replacement x-axis carriage, I think it would work. The aluminum extrusion size is the same as the original, so the carriage should fit.
All's mine does is make a screening sound . I can't figure out what's wrong it's brand new
did you manage to fix it and if so how's it been printing?
what cura profile we use the ender 3 max?
Correct, the Ender 3 Max profile, but then set the z-height to 320mm in the machine settings to match the Neo's max height.
Not a bad printer, but the company support is a 'F'.
I bought one of these 2 months ago. Printer 5 rolls of filament with no real issues. I cleaned it after each print, leveled the bed after each print etc etc.
Then the other day. I had a 15 hour PLA print going and I checked in on it after 8 hours from my remote app and the printer was moving fine but no filament was coming out.
I went to my print room and stopped the job. The hotend had become clogged and the extruder continued to force filament down into the hot end where it built leaked and created a mess of the hot end. It wasn't salvageable by cleaning and so I contacted their support. I am sorry, but it is terrible. This is a $15 part and I am having no luck get then to even understand. This should be a slam dunk - send me another cheap hotend, but no they don't seem to get it.
I bought this as an entry level printer and was going to buy another Creality higher end model, but that is not going to happen.
Worst support I have even had.
I'll send the whole unit back to Amazon.
It's a piece of crap without upgrades as are most of Creality's machines.
Extremely disappointed with this printer. I got 2 solid prints out of it before it quit working.
I've had this printer for 6 months. It's more of an upgrade platform with the most bottom tier parts bolted on to get it to print for a few dozen hours. Pretty much everything on it besides the frame and steppers have to be changed in order for it to get reliable high quality prints. New hotend, new extruder, new bed surface, new controller board, better bowden tube, the wiring needs to be ferrule crimped, the power supply cover is lacking venting holes... ok I think I covered everything? You get the idea... if you're not into tinkering and don't have solid CAD knowledge to build new parts, stay away from this thing.
What would you recommend ?
@@Jagthunder1probably some $1500 printer lol
I hate that they are still using the 4.2.2 board it's trash and they know it.
This in not a review. It’s a promotional video 🤦🏼♂️
I'd love to know what else you'd like to hear in these review videos. Always looking for ways to improve.
worst printer ever,y axis is very noisy,only prints ok with odd filaments gantry plates are naff,should have got the ender 3 max and upgraded it like my old one.the price on this neo should be around £250
No the M3D Crane Quad is the worst printer ever. I just got my Neo Max a week ago. And after calibrating the XYZ axis E-steps i have my prints roughly within +/-0.03mm. Its amazing compared to the POS that i have been trying to fix.