Creality Ender-3 Max Neo - 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2022
- Amazon Links
Ender-3 Max Neo: geni.us/oSzU
Recommended: geni.us/JustVlads
SainSmart: www.sainsmart.com/products/cr...
Creality Ender 3 Max Neo, Large 3D Printer with All Metal Direct Drive Extruder, Dual Z-Axis, CR Touch Auto-Leveling, Upgraded Ender 3 Max for DIY Home and School, 300×300×320mm
Achieve Creative Freedom:
With a build volume measuring 300 x 30 x 320mm, the new Creality Ender-3 MAX Neo allows you to print large projects in one go.
Easy Setup:
6-minute assembly; The built-in CR Touch auto-leveling kit and color touch screen with rotary knob takes the Ender 3 Max Neo to a new level of ease of use, making it a great 3D printer for beginners.
Improved Experience:
The Ender 3 Max Neo comes with belt tensioner on both X-axis and Y-axis for easier maintenance. In addition, Equipped with silent TMC2208 board and filament run-out sensor, it brings you a smooth 3D printing experience.
Enhanced Stability:
By installing a second Z-axis lead screw, it stabilizes the X-axis gantry and prevents gantry sagging on the Ender 3 Max Neo. The upgraded components are easier to print, improving the printing quality.
Dual Fan Cooling:
Better heat dissipation reduces the chances of filament blockage so that it improves the overall printing precision when you print big. Compared with ordinary 3d printers, the printing speed is faster, which can reach 120mm/s.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/ - วิทยาศาสตร์และเทคโนโลยี
New Channel: www.youtube.com/@Just_Print
Ender-3 Max Neo: geni.us/oSzU
Recommended: geni.us/JustVlads
your title should have been "Unboxing - complete setup guide - Cura crash course included as bonus - every 3D type print demonstration" hands down one of the best review video seen so far, was going to ignore the video, glad I clicked it. enjoyed to the last second.
Dude... I'm not really into unboxing/setup/whatever videos. With that being said, this is one of the absolute most detailed and amazing video of this type that I have ever seen. I don't know if I will ever need to watch another one of your videos but this video was so good you have easily earned a subscription. Well done sir.... Well done...
I cannot begin to tell you how much I appreciate this video!!!!! This is my first printer, and I was so lost on the very first step, because it never said to push the horizontal bar up. And it didn't mention plugging in those Z-wires. The only thing I still struggled with was feeding the filament. I couldn't get it to go into the hole until I cut both sides into an arrow shape, then it went in.
This is a perfectly detailed video! Thanks so much sir for taking the time to do this. There are a lot of us that appreciate it! Keep up the good work :)
I would like to say, "Thank You" for making my new purchase more enjoyable with a indepth demo as to how to set it up and get it going! Great Job!
You made setup and first print so easy. Thank you, Vlad!
I dont normaly comment on videos, but WOW the level of detail you put into the video was amazing keep up the great work!
I have the Org MAX and am glad to see they took advice to fix little problems that the first ones did!!I had to put the dual Z axis and the CR touch, the screen update. I took my springs off the bed but I guess we will see how yours does
one of the best tutorials that I have seen for setting up a 3d printer. Thanks
Fantastic content. You have taken me from a complete noob to having the confidence to crack on with my Neo. Thanks for such a detailed, well delivered guide.
A huge thank you for this video. It was exactly what I needed to start with this printer (first one). Really appreciate the time and detail you put in.
4 months in, how are you liking your printer?
Thank you so much for this video. I have watched several others and your video is the only one that truly helped me with my issues. Thanks again!
Third video of yours I walked with you through. Thanks again, Vlad!
HUGE thank you for this video! Your camera angle and detail were perfect for helping me get my Max Neo setup. I've got it printing the Benchy now as I post this and couldn't have done it without your help.
Agree. How's yours been treating you? I'm looking into buying one as it seems like a really solid beginners printer that can achieve really good results
I needed a bigger 3D printer , you really reviewed everything , thanks for the review , I just bought one!!!
This is one of the best unbox videos I've ever seen. would definitely like to see more of this content.
My ender came on Tuesday and it’s still in the box, tomorrow big day. Thank you for this video, man!
Usually don’t comment, but felt you deserved it. I truly appreciate this video and the time you took to show step by step for someone as challenged as myself. You made someone’s day my man and I hope that makes your day knowing that👍🏼.
Thank you so much, this video was an excellent starting point, my first print ever is going now and it looks fantastic!
Thank you, just set up my Max printer and did the boat first as its smaller. But used black filament which hindset, not a good ideal since you can't see the printing well. Note, IF YOU ARE IN UK, DO NOT PUT VOLTAGE TO 115, YOU WILL BLOW UP THE PSU. You need to put it as 240v. 115v is for USA and other countries with that voltage.
This is one of the best review / instructional videos I have ever watched on any subject. Awesome work my friend, thank you very much for your time and effort making it, it has been a tremendous help.
Thanks! One of the best videos for the Neo Max!
Thank you for this awesome rewiev. This vid is by far the best i have ever seen :) I have ordered my first printer. A Ender 3 Max Neo. Wish me luck. Cheers from Thomas in northern Sweden
The intro b-roll of the machine is top notch brotha!
It’s rare I watch unboxing videos but as o brought this printer as my first I am soo worried about messing it up so thank you for the video it’s incredibly helpful
Great video. Thank you. Looking forward to getting this printer shortly and this video will really help.
Thank you so much, You made it even easier for me to set it up, Even it's my first printer but I did it as a pro thanks to you.
Thanks, mine just arrived yesterday and ill be setting it up today.
This is easily one of the most comprehensive and informative instruction videos I've come across on TH-cam. Many thanks for the dedication and effort invested in creating it!
Super helpful video for a total beginner, thanks so much!
Thanks for your reviews!
Excellent video. You have earned a new sub. I am mew to this hobby and looking forward to videos of how to design and splice on Cura.
Cheers from Cabo San Lucas, Mexico
Great review! Creality is doing the same thing here as I saw on another of their printers though, probably the Ender 3 V2: the plate that covers the power supply has holes for the fan but the vents on the power supply are completely covered, causing the warm air to be recycled back toward the fan. The reviewer cute the plate in half to expose more of the power supply for air flow, maybe some slots to line up with the ones in the power supply could be added?
This was perfect the best video about the printer out there thanks
So, mine just arrived today, came across your video when I was looking for a printer, remembered it and just did the setup and preparation as shown in your video, so let's see how it goes. Your vid defs covers like literally everything, so it defs got me considering this as my first 3D printer, especially since I got it at a solid price for it's bed size too. Looking forward to seeing my calibration cube lol. Benchy would take more time than I got available at the moment, but that's this weekend's print if I'm up for it lol
thank you so much for making this video. i followed along to your video setting mine up, and my first benchy came out perfect.
i was nervous on whether the adjustments for the bearings below the bed or my z offset were actually correct but everything turned out well. my z offset ended up being -2.90!
How are you liking the max neo now? I'm contemplating getting this printer myself.
I just bought an Ender 3 Max Neo and it arrived yesterday. I watched this guide on how to set it up and it took me no time at all to get it all set up. This guide is really well detailed.
Just make sure that if you live in the UK or anywhere else outside the US to change the voltage to 220V and NOT 110V. I made the mistake of following the guide a little too well without realizing that this was for the US and blew my power supply as I started it up lol.
I did the opposite. I live in the US and my printer came set on 220. I couldn't figure out why it kept shutting off when I tried to preheat until I was checking wires and found that switch on the back. 😂
Thank you for adding this! I'm in the UK and just ordered this as well 😂
Got mine as a present and was questioning where to plut the filimant.
Thank you sir
Very useful video thank you so much! Have come back to it a couple of times now
What an amzaing video! Full of information
Good job!👏
I was so afraid of messing something up but after figuring out the "friction feel" of the paper I was able to get everything going!! I was worried the ac in my room would ruin the print but it went so well!
I think it’s also important to remember that messing up is part of 3d printing! There are times when you may not be able to get it right but that is completely fine because that’s how it works. You just have to keep adjusting until you find what works the best!
@@SenseiNoyng yeah tbh I spoke too soon rofl! The last bit of my benchy keeps failing right after the arches it knocks it off the bed by actually hitting it. I tried a few things and I think it's working now. Pretty sure I was too far off the bed but we'll see soon :) I'm having fun! This reminds me of when I first made my unRAID server And really delved into what a server can do for your home! A great thing to keep your mind busy
I just brought the printer.. your video is great
I watched this video, ordered one… followed this video step and step and boom… smoke coming out my printer and game over. When you switch your printer on you have to check your country voltage. As an amateur I just followed the steps in the video and changed the power on the printer to match this video. I wish in this video you said you was switching the power because of this… but this review and video is superb it helped me set up my printer, level it properly and it’s been on straight for 2 weeks already 🙌
Got my printer fixed the rest of your video was very useful
Excellent. Thanks so much!
Love your reviews 🙂
Love the video and really help me set up the printer for use Do you know if there is a way to switch sd cards and initiate the card without having to reboot the printer each time?
I'm not much for unboxing videos but because this printer will be my introduction into 3D printing I decided to watch and I am so glad I did. You do an excellent job and I am going to feel a ton more comfortable with the printer because of it. The only constructive criticism I would make is that when you talk about the bed cooling you never give an actual time but this is definitely a nit pick on my part that I'm only making because viewers, especially newbies like me, hang on every word and the more specific you can be in describing something the better. Again that is just a nit pick as I found the video to be absolutely excellent. Thanks very much.
3 months later, how do you like the max neo? I'm contemplating getting it myself.
@@OganySupreme I love it. I set it up, printed ONLY the little rabbit that you're supposed to print to make sure it's working and after that I've just been printing stuff I draw in TinkerCAD, modify in TinkerCAD or find online. I have printed dozens and dozens of things and so far it hasn't missed a beat. The only complaint I would have is not really a complaint but a reality of the machine that one just has to accept. Because of the type of bed that it has it takes a while to cool down and only then can (or at least, should you) remove the print. I see where people don't like how long it takes to cool down but the benefit is that I haven't dealt, even a single time, with any issue related to something not sticking or sticking too much. IOW, let it do what it wants to do and it just works. Also, I struggled to find info as far as how to take care of the bed with some recommending one thing and others saying that that very thing would ruin the finish on the bed. I ended up getting Dawn Powerwash (that you just spray, wipe and rinse) using HOMEXCEL Microfiber cleaning clothes all from Amazon. I don't go crazy and I don't clean it after every print but every so many prints I just give it a simple cleaning and print. I hope this information is helpful to you.
@@firstthes2811 Thank you! What's been making me nervous is that there's a bunch of people online that report huge issues with this printer. They report the printer not leaving the home screen, working for a couple hours and then all of the sudden dying, it only works with certain filaments or types of PLA, etc. It's been making me nervous to buy one but it is by far the best deal for the features you get as of right now.
Currently trying to upgrade from my old Ender 3, maybe I'll get this one, still not 100%.
@@OganySupreme You're welcome. I've only used PLA but a couple of different brands with no problems and I've had no problems with the screen at all. Good luck.
Ooo I cant wait to try this out
I'm gutted to see the dual-part cooling fan is now just one. This is amazing on my Ender 3 max. WHy oh why make that only one part cooling fan is shocking. Nice to see dual lead screws and a CR touch though.
awesome video, thank you!!!
Thankyou for the great video but how do you clean the glass bed?
This video is just what I needed never used a 3d printer and this is pretty good information since this is the exact printer I'm looking at can't spring for the 5 max but wanted something bigger than the ender 3 so shooting at this in between. The max neo already has dual z and cr touch and can't remember if the max has the glass bed but since the neo does by the time I would buy the upgrades I would probably be close to the $100 difference so why not get one already done. Only wish it had dual extruders or at least the board for it, wish creality had a custom order build kit option available. Will check out your other videos you may have another subscriber since I need to learn how to actually use them not just purchase someone else's programs I am buying it to hopefully make custom parts inside custom cars for my Son
I had ghosting and vibration on my Org max and what I did was go to 42-40 or was it 40-42 anyway it seemed to fix that small problem.I think the bigger motors smoothed it out
I just purchased this 3D printer to make candle models for silicone molds. Your video was A+ thank you!!! Can I lightly sand the model so the lines do not show when I add the silicone?
Are there any better preference setting or are his literally perfect?
Just got mine today…your video really helped, and mine prints perfectly
Thank you for putting together a very comprehensive "Getting Started". Super helpful. Still have a question. I tried to print the Benji twice and in 20 min or so it's getting dislodged from the table :( Any settings I can adjust ? Thanks!
Can you provide links to the models you used in the video review? Thanks!
Very nice and usefull description.
This is 3D Max Neo... it is copied and updated after 3D Max which has 300x300x340 mm... so it is possible that 3D Max Neo can also print up to 340 mm. Change its parameters and see if it works.. and tell us to know. Thank you.
Awesome video! My only question is...do you have to go through the setup process every time you shut down the printer, or for a new print?? ie... leveling, z offset..etc.etc. Thanks!
No, just once and then occasionally if needed.
Are you able to use magnetic bed with this as glass beds are trash?
Did you find anywhere that sells the silicone sock for this one?
Thanks for a very defined video. I'm new at this, first printer, and I seem to have a problem. I follow your instructions to where Z comes down. That is where mine stops, and screen states.Homing Fail...Where do I go from here? THANKS.
I would suggest the idea of maybe printing an adapter to better hold the filament since there spool holder is kinda bad
Great video. Had an Ender 3 MAX. Tried this Neo. Instructiona and my past knowledge of 3 MAX were useless setting this up and running. First printer was a Longer 5K Pro. This printed fine for a few minutes then not only was there no filament coming out, noticed a lot of slack filament before the run out sensor. Like it had tried to remove filament. Hate the lack of filament control on this printer. Will pull nozzle and clear lines tomorrow. Will use another file, and if happens again....................back to Amazon and trade for another Longer 5k pro
Could not find any torx driver, included or what I had, that would fit cover for hot end cover to change nozzle
Just a question: would you recommend a PEI sheet for this printer?
How does it just print on the that glass bed. My ender 3 max regular with bl touch. Never works on i have to use glue stick evrry print. Havent tried hair spray yet. No matter if i clean it with 70% or 90% alcohol it wont stick. Ill even have initial layer so low that it doesnt extrude because its too close. And still doesnt stick. Ive tried backing off. Is it just poor qc and i need to try a new bed with that dot matrix on it?
Not complaining but can you say for US user switch to the new 110 and rest of the country people to check the output current please, I blindly followed your setup steps without watching it first and do my research how to set it up, like I said some of the people like me just follow the video and start the setup coz they are curious. Anyway I live in Uk and 110 is not the option, I learned it when it started smoking lol
"Squrtle" is a popular character from the hit cartoon, videogame and trading card game series, 'Pokémon'.
Please link the prints used in the video
is the gold like clamp on the z axis bar ment to be slightly loose? like i lift the side where the filament goes by like 1mm. i cant seem to adjust it so it goes tight like the other side
Thanks for the video! The only thing that would be nice if you had mentioned is that leveling the bed manually might causes a lot of scratches on the glass (mine scratched a lot) :(
Same, I didn't understand what the paper was for at first! So I was foolish and thought I could get by without it, I got some nice square etchings on my plate now! But the print is going super well!
Can you recommend a brand of clear PLA for the Creality Ender 3 Max Neo? I'm kind of overwhelmed, and reading that some brands of clear PLA clog or gave issues.
what would you say is a better deal ender 3 max or 3 max neo comparing the price and performance? is it worth the upgrade?
nice
I just got one and i cant get it to print correctly. I have an Ender 3 v2 that works perfectly but this new one i cant get to start a decent print
i cant get the cover with the heat break fan to come off. i took out the one screw. and i dont want to yank it the wrong way.
It went from dusl 4010 fans design who was amazing to an ender 3 style single side fan.....
this is my next printer..! 😇
Hi, do you have the firmware for the tender 3 max neo with the included LA?
Max neo or ender 3 S1?
I just received this same printer, but I'm not able to get the upright screws to go all the in, did you have any problems with this?
Did you change the nozzle?
did you notice if the gantry middle bar with the hotend on was offset on the right side.
i am looking at mine followed your guide for setup and done my first print however it looks as if my bar across the middle is slightly off on the right side by like 2-3mm its defiantly not straight.
This should help: th-cam.com/video/eCfhJT434GY/w-d-xo.html
@@JustVlads top man cheers for this appreciated
@@JustVlads do you have a profile your using for the neo max
I brought this printer and I never received that brow box, I just had the bags loose in the box and didn’t receive a cleaning part wtf
Do I need a pc or can I get by with a smartphone?
OK, I finally received a new printer. Yes that one was defective. BUT , now a new problem. Following your instructions, when I insert the micro card and push print; all i get is ''back'''. NO FILE. So what's my next step? THANKS/.
Why won't the control panel read my card,I put it in a laptop and the files are there but nothing shows up on the control panel??
My fans go on as soon as I turn it on. Is that correct?
Mine is "out for delivery" as I type this.😁
How did you get it to print so easily right away? Mine don't stick to the bed and shift soon as it starts trying to lay down the first layer.
Try spray some hairspray or glue stick on the bed. It will make the first lay stick better and prevent any warping
I just got mine and having the same issues. Been playing with the z-offset. Were you able to get yours fixed? Did the adhesive suggestion work?
+1
I am facing the same problem with mine, did you fix it?
Tried to print a 3dbenchy with the settings from the video and all the infill and detail disappeared from the model when slicing. This turned my first couple prints into a spaghettified mess.
I live in the UK what do I need to set the voltage to
320 bud
Y did you skip the peel😔😔
Squirtle = squirrel + turtle? I mean…. I never thought of it like that before hahaha
Is it abs or pla
dude... squirdle is a pokemon 😂😂😂😂😂😂
My screws wont go in no matter how much i spin it im so worried