I Broke The LS S10 RIGHT BEFORE ITS FIRST DRIVE...
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- Do not clear the Codes on your LS Swap while it is running apparently! Learned that one the hard way. Was about to take this thing on its first drive when I made that Mistake!
THE COMMITTED CREW:
www.TheCommittedCrew.com
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2 - ยานยนต์และพาหนะ
It’s like that meme.
Not running LS- upgrade
Sort of running LS- upgrade
Great running Ls- upgrade
(Clears codes)
High idle LS- fuck go back.
Also. Mash potatoes 🥔
😂
I dont know why seeing that gas pedal installed was so funny but that had me crying! 🤣
-Mashed potatoes
Omg I laughed entirely too hard at that!! 🤣🤣🤣
When you clicked so fast that the video is still 360p.... damn
still 44minutes later its still 360p lmao
1 hour and its still 360p
Even now it still is 😐
I have 1080p
@@christopherc1976 I’m confused
Guarantee you have an air pocket near your coolant temp sensor that is making the ECU think the engine is still cold... Let's get some likes so he sees this!! Usually the port on the head goes from head to head
360p gang
"dude I can't believe this actually worked"
a phrase I've been hearing a lot on this channel lmao
An inch or two shy under there, I feel ya man 😂😂😂
I hope this is clickbait. But I can't lie, I'm excited to see some carnage🤣
Mashed potatoes
I was thinkin the same thing😭
It’s dope watching Brad and Robbie back to back... Mash potatoes 😌
The coolant leak on your head runs to the throttle body. You’ve also got an oil line that runs to the throttle body
The first nipple is the crossover tube for the heads, connects both heads in the front under the intake. The nipples out the rad are for the transmission cooler lines
Feel bad for you man you tried everything to get that truck started all I can say is men is to don't give up on yourself don't push it over the limits
On the Throttle body put a filter with air intake hose its going to help a lot starting it up.
Mashed potato!! That gas pedal made my day 🤣
i love youtubers like Robbie that show the hard and not so enjoyable parts of working on cars that you normally wouldn't see and therefore expect. also, mashed potatoes!
PLEASE LOOK AT BUILT OFFICIAL HE HAS SUCH A COOL CHANNEL IF YOU LIKE THIS
5:33 lmfao, I can't... Mash Potatoes
"For the sake of getting on the road today, I built that", little did he know...😂
Yes! The bank 1 sensor 1 and bank 2 sensor 1 O2 sensors need to be plugged in! You will be reading really lean and it won't run right.
Well Robbie I can attribute your videos to my recent purchase of a project. After years of debating and thinking I just don't have the know how, your videos gave me hope and I recently came across a deal that was too good to pass up. Bought myself a 1984 ford ranger because of your s10 build and I can't wait to get wrenching on it, thanks for the encouragement with every video you do!
Mash potatoes. Haven’t been around in a while catching up on all your videos miss watching but sometimes you lose passion but I’m getting it back thanks for all the videos!! Stay committed!! 💯💯
Love your vids. I'm learning a lot about working on cars thx
There is no time to wait for HD. 360p is enough
I just realized when he did the close up... he looks like the grown up version of Dewey from Malcom in the middle 😂 🤣😂😂🤣🤣🤣❤
Cant wait to see these projects evolve
mashed potatoes btw
Keep the LS S10 content coming!
I’m loving these S-10 videos
Robbie can’t wait for the s10 to finally start running well 🔥
Loved the video and I always love the fact that you show us everything that goes wrong in the process, because when you finally do get it, man it feels so good. Mashed potatoes.
Robbie, I think you also need a different coolant overflow that has a cap that will hold pressure since that rad doesn't have a pressure cap. Hope that makes sense
Back after a while of dealing with my own shit! Glad to see you're well. Mashed potatoes since before the wish video on the BRZ baby!
I think its running in limp mode.
It runs lean and doesnt run when you pull and clear all the codes. Then it runs even leaner... So no start. When it warms up it will run.
Check Map sensor if it needs one. Temprature sensor check (coolant and intake) and does it have maf normally? It needs that, otherwise It will always be like this.
Without sensors it will always run in limp mode and the current tune for that is a lean mixture. Normally it would run on a rich mixture in limp.
Mash Potatoes. Great vid bro. I always enjoy relaxing at home watching stress yourself out with all these car issues lol.
for you who does your own parts such as brackets etc. I suggest you purchasing a 3D-printer, it is easy and cheap to produce parts. And you can print in plenty of materials. From plastic to metal, carbon fiber and nylon, but that is just some examples. Pretty stiff and reliable materials. If youre interested, comment back and we could keep in touch on mail or DM, if not somewhere else
Last time I was this early, jasmin wasn’t even wide bodied
Mashed potaters 🔥
I love the NF hat!!
yo that gas pedal part had me rolling! stoked to see the s10 build continue and hope you work on the genny soon. mashed potatoes
Robbie it’s alright man I mean you’ve gotten far with the s10 man you’re doing good I recommend in the mean time working on the 300zx
Just to let you know you will need a presser return bottle on coolent . Not a window fluid container. Because wires go to it that goes to computer. Hope this helps a little.
Mash potatoes. You're doing a great job Robby keep it up love your videos. Have a nice day from sweden
It will be worth the wait! Can’t wait for the results!
Mashed potatoes.
That sounds good lol
Mashed potatoes. This build has me super excited to complete mine. Keep up the good work.
The intake air temp sensor is part of the maf, it wont run right without it,you can convert it to speed density in hp tuners and not have to use the maf. You would need to add a iat sensor
Mashed potatoes! You made the right call. Cant wait to see the s10 rippin
Glad youre just biting the bullet and getting the wiring redone for the S10. It was getting pretty haggard tbh. But i think this will help it get together a little nicer before you go ahead and do a full rebuild on it.
Mashed potatoes
360p?
Sorry about the buzz kill but tbh I always thought you should get the correct harness one for looks so there not a bunch of looms everywhere but two when you pull the motor to do the rust correction it will be that much easier to pull and reinstall
It would help if you attach the MAF sensor (Mass Airfrow Sensor) that gos between the factory air cleaner and the throttle body. The way that you have it right now the PCM (Computer) does not know how much fuel to add to the motor. The MAF sensor monitors the amount of air going into the motor. The computer reads this and then tells the injectors how much fuel the motor needs to run at the correct air/fuel ratio. You can also modify the transmission lines so that you can use the factory battery tray location.
mashed potatoes! excited for the s10 to run and drive, have a good day robbie!
When you remove maf the pcm relies on ve tables and require o2 sensors. Without the o2s it’ll somewhat run if you have a maf. O2s are a pretty big deal on these though
That gas pedal has me 😂😂😂
- smashed potatoes
Mashed potatoes!!!!!!!!!!!!
Please use the stock s10 rad for the 4.3 modify the transmission cooler lines to work with the bigger s10 rad. Modify the rad support. So the rad sits inside the support. Current performance has a wright up on how to do that. S10 forum also has some information on that too. The steam vent needs to to a port on the rad. The S10 power steering hoses will work for the 4.8 LS pump to gear.
can`t wait to see it again but in 1080p
You dingus 😂😂😂😂
Love the content man
Robbie: What are you doing this is a car channel?
TH-cam: You legit had several episodes on 4 wheelers.... so... yeah... (Mashpotatoes)
"we have a pretty big news next week" I want to hear a really big news lol
Coming from someone with a W140, how the hell did you even start it without a maf. HOW WHAT MAGIC
Yay a long vid again
Yeeees over 20 minutes 😍
Mashed Potatoes, stay committed can't wait to see this truck going proper!
Mashed potatoes! I love what you’re doing man. If you run speed density off of the iat and map sensor you don’t need a maf, and if you plan on boosting it, it’s better to run speed density anyways.
I vote frame resto while you wait on the harness, also mash potatoes and stay committed!
Dam that sucks spent so much time building it and now ripping it apart again...😞 MASH POTATO!!!!
Can we just call it the LS10 build?
Aww and the build was going as good as mashed potatoes
I usually fill them when there's no fill cap I fill them from the overflow resivwar
You need to run the maf and iat for that thing to run nice in stock form.
MASHED PERTERTERS
got an notification, didnt hesitate
Every video is soo good.
-Mashed patatoes
I love all kinds of potatoes. Especially mashed.
I love your videos
I love this ....this is a car channel now let's fix my truck
I dead when he showed the finished gas pedal😂
I love the other guys (I feel really bad because I’m blanking on it) Vstar it’s clean
Oh and mashed potato’s
Yo! I hope you've gotten my package can't wait for you to see what I made for you! and Mashed Potatoes you secret keeper!
Robbie delete revisor tank and put a cap in the middle of the hose 👌🏼
Lmao I died of laughter after seeing that crooked gas pedal
Mashed potatoes = hilarious 😂 can’t wait to see this thing rip up the road
the builds a little mashed potatoes right now but its getting there and im happy, Proud of you my guy
Any updates on the s10 I follow your channel and currently doing a 5.3 swap in my blue 87 s10 and love the s10 videos. Did you ever get your harness back. I’m ready to see some updates!
Definitely one of my favorite TH-cam channels. Mashed potatoes ✌️
love ya robbie! also mashed potatoes!
Hey Robby the dip stick you put in won’t have the oem length so your fluid level won’t be right autos need to have the proper level to work and shift right to much fluid you’ll blow seals out not enough rough shifting and could burn clutch packs out if low enough.
Long videos to procrastinate to, love it
mash potatoes
Hey man, love the content! What year is your BRZ?
im still watching, my eyes hurt but its worth
Oh my God bro the sideways gas pedal had me rolling
Early love the vids man
Robbie likes to put the words on the screen but only for the people that read at light speed
Mashed potatoes lol I always stay till the end
Mash potatoes 😂😂😂 your real making me rethink my whole s10 build🤦🏽♂️ instead of 305 going ls 😅😅😅
Don't forget to put the expantion tank to the highest point of the engine since you don't have a filler cap on the rad!
You need that mass air sensor for it to run right
“Mashed potatoes” - Robbie
love it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
“Two little nippys wantin to hang out” 💀😂
Mash potatoes!!!!! 💯💯💯🔥🔥🔥🔥♥️
Woo hoo! Mashed potatoes! Don't give up Bro!
The computer realy does care about the o2 sensor being cleared. I just did mine on a audi, and it did the same thing. Except I can keep it running until the o2 error comes back up.