Sig Sauer Romeo Zero Red Dot
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2021
- Sig Sauer Romeo Zero Red Dot Sight
Optics Planet code 704tac for 5% off
Code:SD9-RD-SSRDSROM-SOR01300
MPN:SOR01300
UPC:798681618958
Thanks American Pawn & Gun LLC in Monroe
(704) 774-1409
/ americanpawnandgunmonroe
704 Gear Facebook
/ 704-gear-2484744285087788 - กีฬา
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 57 [ซับไทย]](http://i.ytimg.com/vi/pNhft3YZFRE/mqdefault.jpg)
This drops as low as $119 online now depending on timing. Crazy value.
I’m thinking about ordering a Romeo Zero to put on my new Mossberg MC2SC. I like the fact that the cut out in the slide of the Mossberg is low so your factory sights will co-witness with the red dot.
Very cool to see a bigger gun channel that's local to me! Hope to see you at a range one day!
I have a Romeo zero in my safe. Picked up the 3 moa cheap at a local shop. Haven’t put it on my 365xl yet due to not wanting to blow a bunch of ammo. I love that it has the rear “iron” sight.
Took mine to the range today...and it is sick accurate and co-witnesses.
Unless someone's a fumble fingers this doesn't add so much weight that you'd be dropping this thing.
I bought mine separately from the gun too. You can buy a gun with the red dot already on it and pre-sighted from Sig. But I put mine on with the metal guard and it was dead on. I mean dead on. Love it.
Well designed AR sight. Very clear and sharp.
Tip.....you can shut the dot off by holding the brightness button for about two seconds. Same process to turn it back on. This seems to override the motion activation. I thought my battery was dead so I turned it off and waited a few minutes and picked it up....motion did not activate the dot. I then turned it on manually and set it down. The dot went off after 2 minutes of inactivity then immediately turned on after I picked it up. Sig's instructions tell you that you can turn it on and off manually but they fail to state that this feature overrides the motion activation. Hope this helps. I even tried a new battery and same results.
Sig has a steel shroud that now comes with the Romeo Zero. It's been that way for months.
Mine came with it too.
I bought this sight and was worrying about the polymer mold. Well, I found out sig has a steel shroud that you can order that this red dot sits in and protects the sight like a metal or aluminum sight. Total cost for shroud $10 shipping. They don't sell this shroud as they haven't made them public but if you message sig customer service and ask to order one, they will mail one to you free of charge however you have to pay shipping. What a deal. It fits perfectly and protect s like the more expensive sights.
I heard that the shroud actually raises up the sight itself? Is that true? Or can you still use iron sights?
It comes with the zero now
Installed shroud on mine almost 2yrs ago… No issues !
I have the shroud as well, it raises it MAYBE 1/16th of an inch.
The Tulster "Oath"" works perfectly. Very thin yet strong and the clip is strong. I it doesn't loose grip both frequent on and off from belt.
My romeo zero came with a metal shell that the red dot sets in.
I just bought it. You can’t beat it for the price. Yes there are better ones out there like Holosun but you pay double. For a 6moa like this one shown. You really can’t beat it. I got mine for $135 shipped to me. Maybe later when I get some money to throw away I’ll get something better( I never have money to throw away), so this will be my sight for a long time..
I am running the same weapon. I ordered straight from sig another slide with romeo zero with another spring and barrel $329.00 with an additional 15% off through my USCCA Membership . My weapon performs awesome
Love my uncle Mike’s holster , The sergeant at my security company has this model different optic , says he will be carrying the sig over his Glock never had the pleasure of firing one . Are you going to be covering the arc reactor?
I hate where the button is on it, hard to use, but if battery dies I can still co-witness with it. Overall I like it
Camera work was awesome.
I think it's ok to rack the slide by the optic, otherwise, why would they stipple it?
Tenicor Velo is my go to holster and I love it
You will love or hate it but Aliengear makes a good Holster that covers the front of the Romeo Zero on a p 365 xl romeo zero shielding it while its in the holster.
I have this weapon system, just got it a while back. Is there a torque wrench you can get from Amazon that is nice for tightening the optics? It is recommended that you check it every few hundred rounds. Thanks!
Very informative! Thanks for the content
Great review. I’ve been watching reviews about this red dot and there’s lots of negativity out there.
Personally, I own numerous pistols most of which are Sig’s ranging from small P238 to the P226 Legion and even a full-size Sig 1911. Generally Sig makes quality stuff so I’d expect no less with their optics.
I like your advice about trying a Red Dot on something before deciding to carry. The first Sig I purchased was a P365XL without the optic so apparently it’s an optic ready pistol and I can just purchase the optic and use it as a learning/trial/practice pistol. The XL I have I actually purchased, at her request for my wife and she never carries it so I’ll borrow it and add a Red Dot.
I will say that among the small 9mm pistols I own it is one of my favorite and I shoot it well. Thanks for your very positive and professional comments. 👍
I’m not especially or totally a Sig Fanboy as I do own other pistols including Colt, Springfield, Smith & Wesson, Kimber even recently a Dan Wesson Specialist 1911 and just this week a CZ 75 PCR Compact.
I say this to say sometimes I think people just like to bash Sig unnecessarily 🤷🏻♂️ it’s amazing. Anyway Happy Trails
This is the only red dot I can mount on my Sig SP 2022 9mm pistol. I have the plate that replaces the rear iron sights from Sig and can get this sight for $139 right now. I knew you'd shoot straight. I was curious as to whether I should get this for my SP 2022 or just put whatever sight I like the most for my Springfield Hellcat. Best option would be both certainly but just in case I can only get 1, which is the case at the time.
Being made of plastic concerned me at first, but then I realize that half of the gun is made of plastic as are many of the most popular carry pistols.
But not the slide. Not the best to put plastic on metal
Swampfox makes an aluminum micro red dot. The swampfox sentinel. I like mine. It co-witnesses with the iron sights on the firearm.
does it have the rear sight milled on the optic?
@@manzano5620 nope. It just co-witnesses the rear sight of the firearm.
I have had a zero on my xl for about 6 months. I have had good luck with mine but I haven't dropped it either.
As far as holster options for the Sig P365xl, you can’t beat McKinatec holsters. Plus they have options with an Olight PL mini 2 with rail adapter and for red dot cuts.
Thanks 👍
Would like to see something about zeroing and adjustments.
IT’s NOT “plastic”.... it’s made out of the same polymer that the gun is constructed out of. Be accurate with your specs and materials. If you’re worried about dropping the optic on concrete, then you should be worried about dropping the weapon too. BTW, got it for $149 from AIM surplus, ALWAYS better than OP. Additionally, if you contact Sig customer service, they’ll send you a metal shroud. Got one for free, since I’m a “registered” Sig customer.
Excellent point Rodney! I’ve learned to trust the polymer grip frame so there is no reason not to trust the polymer sight housing.
Polymer flexes more than metal, and the polymer on the sight is thin and encasing glass, where the frame does neither of those, so there are valid reasons to question the sight construction more than we question the frame construction.
@@Gruuvin1 blah blah blah blahhhhh the glass is half full no its half empty. you sounding like a karen
@@ynotjf Yes but the polymer frame isn't being shot back like a canon or expected to hold zero like a red dot is sitting on top of a slide that's moving back and forth violently....The material for a red dot is far more important than the material of the handle, because it needs to be precise.
dam well if that was the case we'd have polymer scopes and polymer aimpoints/eotechs.
The plastic lens is very scratch-prone. Mine had multiple scratches within a month. It now lives on a .22. The Holosun and the Swampfox are both much more durable.
Will the Holosun 407/507 fit this slide cut?
Did they upgrade the lens? I thought this was only in beginning production models and now they offer a metal shroud. I have an option to buy the xl with the optic for $125 more but if it scratches then ill save for the holosun.
@@awesomedave8484 I don't believe that the Romeo Zero has a shroud. The Romeo one pro did come with a shroud. I now have three Holosun 507K sights and they are outstanding.
I know this is an old comment but the Romeo Zero Pro has glass lens
It comes with a metal shroud. Every one I have bought came with one. This is the problem with free stuff to review. They ship you an open package and then you don't know about it.
It was the material that always worried me. It's one of the reasons why I never messed with the Shield RMS/c. I think the Holosun 507k definitely wins this category of pistol red dots
2.5x the price
@@fernandoleamshake7031 Also the 507K weighs in at 1 ounce... whereas the Romeo Zero only weighs .4oz
@@fernandoleamshake7031 A red dot is one of those things where if you're going to cheap out, don't even get one at all. Especially for your carry gun. If it's at a range fine, you can have a shit red dot and not worry about it breaking. But if you're a cop or live in a very sketchy area, spending the extra money is worthwhile. I've never heard of a rock climber cheaping out on climbing rope lol. The holosun 407c is like $225 and it's well worth the extra money.
@@aztronomy7457 The Holosun is more bulky and more expensive. Not worth spending twice the price at all. Sig makes good products, their red dot sights are proven. If they can work on an AR-15 300, then they will work on anything.
@@guicohj Holosun red dots are nicer than the sig ones hands down....And they aren't twice the price usually. Again, if it's your carry gun, and you're going to spend a few hundred on ammo to shoot it anyways, whats 100-200 bucks?
Just threw it on my Sar9. Tack driver at 15 yards. Definite variation at 90 feet, but I mostly blame human error
I got the 15 round magazine in my p365 xl I’m going to grab this optic currently waiting on my ccw permit to come in great video
PHLsters & Henry Holsters make holsters for the P365XL with Optic. Either company is a good choice.
Nice B roll footage
i have the romeo zero, i got the steel case that it goes inside to make it more durable. the only issue i have is removing the dot to change the battery
Something i never understood about these sights is how In the world is the iron site correct always, but the red dot correct also even tho it’s at different positions when you move it.. wouldn’t you have to align the red dot with the front sight for it to be accurate.. so if you don’t have your face in the exact same position every time the red dot will be at a different angle and position..? Like how it it considered zeroed or do you even zero it without have its own front sight
Perfect fit for the P322
Get the 15rd magazines are the way to go
Sig offers a metal shroud for the optic. Not on their site, but I emailed them and have the number for the actual rep. $30. I’d say it’s worth it.
I have the metal shroud and it doesn’t help with the lens getting scratched super easy. They’ll send it to you for free if you ask for it.
Sig customer Svc sent me the shroud for $10 bucks s/h since I was a “loyal “ customer...
$13.00 on Amazon
Ive seen people mount pistol optics to rifles. Maybe they are just smaller rifle reflex sights. Am i wrong? Id love to mount this small, good priced optic om the picatinny area ontop of my primary arms scope.
I can't seem to find information about it so perhaps im confused.
Hello,
Where did you get the holster or what brand is it ?
How do I go back to iron sights on this exact set up? I hate the Romeo zero and red dots on handguns in general.
The price on that dot is surprising for as good as it is. I think old V and H need to take a break.
Do you think it's possible to mount a site like that on a Tokarev?
my battery went dead in three months hopefully new battery lasts longer. only used 3 times at the range
The problem I have with it, is when the dot goes to sleep and when I pick the firearm up it seems like the dot takes 5 seconds to come on!!!! People are telling me that it should be immediate
hi went to buy the x but the dot was floating all over, ive never used one , is this normal or a defect?
Holosun 507k fits on this pistol and is metal.
Does it come with a free Covid vaccine?
@@InGratitudeIam comes with two
@@obeyt-raw4876 and with a free enema!
Great video
Do you plan on testing the cts 1550?
Just got mine yesterday
Love my romeo's...
Hello, will this optic work on taurus gx4 toro and does the gx4 rear sight have to be removed? Thx
What brand holsters do you have displayed there?
I have never shot with a red dot on a handgun. . . . Really curious tho.
it's supposed to be something like a gun polymer, and they have been proven to stand the time and abuse
The sig sauer Romeo zero micro red dot is the first red dot I’ve ever bought or owned and I have it on my edc Canik tp9 elite sc in desert green and It’s been amazing for me and today I bought a new REDFIELD 1x mini red dot today for my new pump action ETRO tactical shotgun in desert tan and it truly compares to the Romeo zero micro red dot because it has easy brightness adjustment on the side with good size buttons and it’s a full metal sight for $145 and I also purchased a new Ruger PC9 with the heat shield over the barrel and ordered a holosun 1x-3x cross hair red dot for it and can’t wait to test it against the Romeo zero and my REDFIELD red dot. I also have a Gen3 glock 19 and was wondering if anyone can recommend a good place to get my Glock slide cut for red dot or a good decent priced after market slide that has the red dot cut already and with front serration and window cuts on the slide as well. Cause everywhere I’ve looked I found places that I can send my slide to them and get the cuts but it has a estimate timeline of 5-6months or I find the one I want but it cost $475-$575 for the slide and that cost the same as my Glock did. I really don’t want to have my slide cut for one it’ll be gone for 6 months or two because I have a full matching serial number gun and don’t want to ruin the stock slide in case I ever decided to sell or trade it. Sorry for the long azz comment and plz reply with any and all suggestions. Or email me at bigtirelifts@gmail.com thnxs
Does the red dot come set? Or Did u have to calibrate and adjust the dot ?
@@danstern96 you have to zero it
I would like to know what holster IWB that is laying on the table.
HOW DOES THIS OPTIC COMPARE TO THE CYLEE OPTICS YOU REVIEW?
Romeo zero red dot battery last about a month and a half , advertised for 20,000 hours …. Total bull . Love the 365xl just wished the battery lasted longer and sig wouldn’t false advertise 😒
Mine has last 1 year so far. Still going strong lol
The bottom battery compartment is the thing I don’t like
Damn i got it at $200 at my Local place with a metal housing cover
I got the same one from Amazon for 179.99
If you leave it on without moving it for a while, it will shut itself off until you move it again
I did not know this has a notch, so you can co-witness right?
where can i find that holster?
What kind of watch are you wearing?
Would this optic fit the Sig M17?
Thanks for the review. I normally just watch your reviews but this one i felt i needed to respond. The optic is really not good for a firearm you're defending you're life with. I put one on the 365 SAS (Because i didn't like the sight that it came with.) Unfortunately, the zero scratched within 2 weeks to a point that it was almost useless. This was caused by the polymers lens rubbing my belt, ejecting rounds, or possibly dust being wiped off, i don't know but it was easily scratched. Sig was kind enough to replace it and even give me the guard for it. ( Currently sitting on the shelf not installed on anything because it's a waste of money.) I got the Holosun 507 (because the 407 was out of stock everywhere.) and put that on instead. I was concerned the zero wouldl not hold up to rain or a lot of sweat well since the electronics are fully exposed. The battery is a pain to replace as it must be removed to do so. To adjust the brightness is a pain because you have to go all the way up and back down so don't pass the setting you want. The adjustments are not obvious either. It does work well under idea conditions and had motion activation on and off. (Motac) The Holosun had the same features but they work better and it's waterproof, has glass not a polymer lens, and it's made of metal. Worth the extra money. I've had the 507 on for a while now with no issues. Thanks again for your efforts to keep us informed. In fact, if you have to send that optic back you can do a real test on the one i got on my shelf. I'm not far from you (Charlotte)
how do you adjust the brightness?
For the price point I can understand why the optic is polymer.
I'm the only one that has the P sig365 X. RXZ.... I can't find any channels that have that gun
It just came out on like march 12th? Im sure in time will see more channels with it/reviewing it. Interested in knowing your opinion so far!
Ayeeee I live in Monroe! #704
Is that NC red clay?
known where to get a owb for the X?
How do you center the dot
Mine isn’t a round dot, it’s like a weird smudge of red. It’s kinda cheapo like crimson trace. Not really happy with it, will upgrade to something else.
That's your astigmatism lol
@@michaelman315 are you serious?
@@Sourpusscandy Best way to check... Take a picture of the dot with your phone.. If it looks normal in the picture, you have astigmatism. I do too, luckily mine isn't quite so bad that I can't use reflex sights.
Does it take batteries
Is it waterproof?
immediately wished I had bought the standard 365XL - the romeo is a zero - you have to turn it on and off with a tiny button located just behind the back lens inside the lens housing - the absolute worst location their chinese engineers could come up with - I am really disappointed in Sig for selling garbage. "Hero -wait while I turn on my red dot" "Zero - Nah" By all meean buy a 365X or XL they are optic ready for RMSC footprint optics - get a RD as close to 1" bc 365s are about 0.91" at the slide. 😉
It has shake-awake and an insane battery life, dude. You just leave it on.
I hope you don’t ever drop that gun 😂
Would this fit Glock 19?
Will this be good on the x macro?
What? Micro RMR? It’s a Shield RMS/ RMSC Footprint. 2:43
It’s Vinyl, you can’t break it.
Does say what moa this sight is. Probably the 3 moa
i just bought mine on amazon for $135
You can find them on Amazon for 159 shipped JS
There down to 144$ now
I have a Romeo zero and it’s pretty much trash. Lens scratches way too easy (Sig replaced my first one, second one got scratched after basic use). Also don’t believe their claim of battery life it dies after a couple months.
Where on Earth did you take it? I've been to the range several times now...and not a scratch hasn't lost 0...
Would've it been nice in aluminum instead. Yes.
4:00 or so
Just got one of these for 5 dollars at a thrift store
hope you used the coupon too!
I tell you what, I went to put a new battery in it and the whole fell apart! Very disappointing!
if i just have the regular 365 (not optics ready and not XL) how hard is it to get it milled or cut so i can put the RMR on it?
Not hard at all, but not cheap. Go to www.mapleleaffirearms.com/ takes about 3 weeks.
Does the red dot come pre Zeroed?
No but close it is easy to sight in
Has anyone put this red dot on a glock 27?
Mine is a POS wont hold zero
Just put one of this on my hell cat and 43x.. can’t wait to shoot it.
Good review, but do ur self a favor and blurr out the serial #.
What is the risk in exposing the serial number? I ask because I had a pistol for sale and the buyer ask for the serial number. When I ask why, he said he wanted to run the serial number to be certain it wasn’t stolen. In the end he did purchase it, thank you
👍👍👍
Respectfully sir... you’re not fully informed about the Sig Romeo Zero. Suggest you research or talk to Sig... about WHY they used a polymer housing for their Romeo Zero RD. It’s the same polymer that makes up Glocks... some of the toughest guns on the planet.
If you dropped your Sig 365 on the concrete... chances are quite high... that it would be just fine.
Read more.
It’s the same tough polymer that