Technical Tuesday - Zeroing Your Red Dot Before Firing
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Here's a quick technique to get your red dot very close to zeroed before firing a round! Think of this as a technique similar to boresighting a rifle--however, there is one confusing twist that is easy to manage if you are ready for it. Happy shooting!
Learn more about optics here: shadowsystemsc...
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
I've always thought of it as taking the irons to the dot. Same process, just how I thought of it in my mind.
very helpful for first time dot users. i found this out by watching my dot move the opposite way i thought it should
Holy crap!! My buddy and I kept saying…the dials are backwards! This explains why and now I can’t wait to go back and sight it in this way. Thanks!
As an old shooter new to pistol optics this was an awesome explanation. I was going crazy at the range wondering what I was doing wrong sighting in the pistol. TY
I was on the crazy list as well.
Excellent, simple explanations are always best. Thanks a great deal. Superb video.
I was frustrated trying to zero in my dot and this helped me immensely! Thanks!
Best red dot zeroing tutorial I have ever watched. You did an exceptional job explaining the process. I can't tell you how confused I get when trying to figure out theses processes. Thank you!!!
Your overthinking it
It's the nuances that really matter. Thanks for helping to make this clear. I went through 5 or 6 other videos that couldn't answer the question I had about this like you've just done. Thank you very much!
Had to watch 7 videos before learning this basic info!! Thanks!
😂😂😂😂😂😂I had to watch twice.
I just recently got my first ever shadow systems CR920X. I have two other pistols with optics on them. I discovered this method early on in transitioning to red dots. The best part about getting a “ruff zero” before going to the range to actually zero your dot is, you’re making sure you’re getting shots on paper so you can properly adjust the dot. Nice job.
I picked up a Mecanik M01 and I figured going the opposite direction got me to my bore sight. I was like uh this ish is backwards but now it makes sense haha. Thanks for the info. I thought my sight was made backwards lol. I matched the red dot right on my front green sight and this Sunday I'm gonna test it out in the country. Great video bro thanks!
You don't understand how helpful you were with this video. I got my optic bore sighted within a minute, but thinking my screws were on backward, I was going to zero my optic in reverse when shooting 😅
Just got my first reddot and this is exactly what I was looking for..Thank you
Guilty of all! Very thorough explanations and illustrations!
THANK YOU. THANK YOU. I had thought I had lost my mind and every gun I had was messed up.
This was sooo helpful. Mounted optics on my MR920 and Zev OZ9C and used this method. When I got to the range I needed no adjustments. Thank you for this!!
Working with my first red dot last night I just moved the dot to the front sight but had no idea why everything was backwards. 😂😂. Thought I was stupid not being able to read the direction.
Thank you. This was really helpful. 💗 from 🇰🇪
Thank you for this info. Got my first red dot today and followed this. Got to the range and my first grouping at 10 yards was money. Needed no adjustments. Definitely a good starting point.
Thank you! Finaly found what I was looking for...👍
Just what I needed. Very simple and well made video. You gained a sub.
We called it lollipoping the dot.
So much more about life makes sense now. Thanks Trevor!
Thanks for keeping it simple,, Trevor. I love my CR920E & MR920C! Best pistols I own, I want the full lineup now.
So I have a sig 365 x macro with the romeo elite sight and every time id look down the optics I couldnt see the dot very well. It was also not co witnessing at all. So I saw this video and thought im going to try this . Everything looks 100% better and im ready to go shoot it. Thank you for explaining this.
1st method is POI 2 method is POA.
Generally speaking, adjusting to POI is way more common. Even most manuals have instructions that way.
POA is to match your dot to your sights. Which is why it’s reversed.
Good info, it pissed me off before I figured this out!
I just did this exact thing,😂
I figured it out pretty quick though.
Wish I would've seen this first.
GREAT lesson! It works great! Few shots needed to dial it in. Thank you SO much for sharing this! Saves time and ammo.
Awesome explanation! Love your Tuesday videos. Thanks 🙏🏼
technical Tuesday are the best, keep it up guys...got my MR920 elite with the Holosun, Cabelas special... red dot is driving me crazy , but what a hell of a gun, after 300 rounds , no cleaning, no issues not one issue at all. keep it up SS!
Great tip!
Thank you for explaining, that really helps
I learned the hard way yesterday 🤦♂️
DUDE?!! THANK YOU SO MUCH!!
You gained a new follower, thanks.
You are absolutely correct and the only one on TH-cam that is correct the dot should cowhitness with the iron sights!!
UMMMMMM, maybe it's just me but much simpler to just say. Adjust the dot to the front sight and go from there? I have done that on all my optic handguns with zero issues. Maybe I missed something???
It's only confusing after watching this video.
What you said is the best advice.
Now that I’ve watched the video, you are correct.
I’m a complete novice, so I understand what he is explaining in the video, but yours is short and simple.
Kind of like old math and new math 😂
Love me some Technical Tuesday. Thanks Trevor. My Holosun 507K was nearly dead on after install on my Covert 920. So much so it freaked me out a little bit. Plug and play anyone?
Get an American made optic for your American made pistol.
Quit being cheap.
@@thefrogking481 that's funny because the phone or device you typed that comment on was most certainly not made in America. Along with the very clothes you have on your back and probably 80% of the stuff you come in contact with everyday. Holosun is good stuff and you should try it before you knock it..
A few companies out there make it so you barely need adjustment
@@thefrogking481 poor guy
@frostyheat22
Only thing you got right was the "phone".
But there's no other choice.
Awesome can't wait to go to the range to verify 👍
Great video. Very informative, thanks!
This is essentially what I did with my PDP, ended up a little low at 10yrds but with a couple tweaks she was doing great. Just for fun I have even slung a few out at the steel on the rifle range, managed about 4/5 before packing it in.
Some goobers might think it's silly to teach people the basics, but making sure that people feel comfortable before or after they dive into a new hobby is how you keep them invested. It's part of why Dems and some Reps would probably like to see information like this removed from the internet, because it does help the 2A community grow.
Did you have the stock sights or had you changed them out before initial zero? Picking up my PDP today and red dot tomorrow.
The red dot manufacturers designed the arrows to point to moving the group (and not moving the dot), which is counter-intuitive. There is probably a good explanation why, but it's driving people crazy as it does the opposite of what you expect.
This technique works great; I've never had to adjust more than a click or 2 during live fire after doing this.
Lol. Sad I didn't realize this when I was trying to slave my dot to my Irons. 😅 I eventually figured out by trial and error but I was so confused for a while. Good video!
When people say “slaving” the dot to the irons, are they meaning overlap the dot with the front sight?
@@JG54206 yes, atleast that's what I mean ;)
@@SolidSnake_1776 Gotcha. I was always kinda confused when people said that.
@@JG54206 yeah overlapping the front iron or right on top to get you close and then you can adjust from there depending on your desired zero distance.
@@SolidSnake_1776 Makes sense. I wish I had thought of that when I bought my rifle red dot. Didn’t need to buy a laser bore sight lol.
Thanks for the info! Big help 🤙🏾
Simply brilliant!
Great job on the video thanks
It’s called lollipop get that red dot dot just above that front site almost like it’s sitting on top like a little head and the front sides the body lollipop popping it
Thanks, simple and helpful!
So what I'm getting is instead of moving the red dot to the iron sights, you're moving the iron sights to the red dot
Better explanation would be moving your front post green dot to the red dot. In this case, green dot is your group.
Was very, very, very helpful. Go opposite as if you want to make it worse.
Great information
Cool vid thanks for sharing!
Another great video!
If you shoot archery this concept is easy to understand.
Appreciate the info!!
great video
Holy fuck am I this stupid? I always thought the dot was suppose to be ABOVE the front post, and by a bit. I have been driving myself NUTS the last week with my new CR920 lmfao.
Thank you for another awesome tip. I am glad to know I did this right!
You are adjusting the group to the dot.
Well explained man, thank you for that!
I do this with every gun with a red dot and it works. It gets the dot really close if not dead on zeroed
Thanks, good video.
Thanks, I would of moved the dot the same as my rear sight too. Saved me from a lot of trouble.
Thanks for this and all tec videos. After much resistance,Just got my first red dot, MR920 elite Holosun. Consider myself a good shooter,weird feeling with the dot. Thanks for the explanation. So bring your dot on top of the sight,some people say forget the sights? For Mr it’s helpful and it makes sense to align with sights. Thanks again keep of the great work SS.
like wise, I broke down and got me the MR920 elite like yours. I am 60, very good shooter like yourself, but this thing is driving me crazy. different schools of thought on this one. I still can't get as tight groups as with my iron, but I found out for me I need co witness, align sights, other wise it drives you nuts. they are all good explanations, but do what works for you. After so many years of shooting, you remind goes to the sights automatically and trying to get away from that will give you a F... headache.:). so I went from enjoying my shooting time, to be frustrated because of the grouping or lack off with the red dot... I should ve stay away until I really needed it. :) ! hope this helps...
I moved my dot to the target before I left the house and I noticed it was the opposite of what the optic said. Then I went to the range and when I shot the grouping went off paper. And of course I reversed what the optic said and then it was not on paper anymore. Now I know why!
I wish I’d seen this 7 years ago when I got my first Red Dot! I wasted hours, then I just waited until I got to the range and wasted a box of Critical Defense!
My simple-to-understand is this:
Where is the dot? Little high and a lotta left? Then turn the adjustment screws the same way. A liitle higher and a lotta left.
This explains why I thought my red dot was reversed…
Just say…..take the iron sights to the dot. Simple.
Thanks for explaining that. Where can I get that t-shirt Bro? Looks like one of Clint Emmersons.
I guess I just don’t understand the point of a red dot if you need iron sights and have to cowitness anyway.
I get what you’re saying.
My question is, how do I know how many clicks to turn vertically or horizontally to move the dot to the irons?
Nice video. Thanks
One click is 1 moa at 100 yards; 4 clicks is 1 moa at 25 yards; 10 clicks is 1 moa at 10 yards.
Thank you sir!!
Easy. Adjust so the top of the front sight cuts the dot in half.
If you're not proficient with iron sights, you're not proficient with a red dot.
First Off before doing anything !!...Zero-In your iron sights ( Your Irons are your Zero Not the Dot ) Then Zero In your Iron Sights to wherever the Red Dot lies using normal elevation & windage .... It's that simple !!
This is hilarious, and true af.
Total protonic reversal!
5 star video
I put a $200 PSA Dagger SW4 GatorMouth RMR milled, 1/3 Co-witness, suppressor sights, 4.5 threaded barrel FDE complete slide on my G19X frame.
Mounted a Holosun HE407c x2 green 2moa dot on & I've heard the Holosun's are somewhat already 25y zero'd.
The dot was sitting just above my front post when in alignment.
However, my 1st thru 5 shots were way left & low. I just made 1 adjustment to each screw & bam! Dead on at 25y.
(1st time for me making only 1 adjustment) Now I'm Punching out a 1" dot 25y & in while rested.
Love that upper, actually made my trigger better. Those wanting to know how a Gen 3 fits a Gen 5 frame? Just swap out the backplates 🤟
So if one doesn't have co-whiteness sights along with the red dot this is irrelevant?.. you would have to not reverse the dials when adjusting to the grouping.
If you look at it as bringing the sights to the dot, you don't have to reverse it mentally.
The sites are the group you want to move.
Great. Thanks.
This is assuming your iron are zeroed, with my mr920 i zeroed my red dot and then i had to drift my rear sight to get them to line up when i lined up my irons
So from what I understand they are both different system. Not the same, maybe unless you have suppressor sights. So this is confusing as the red/green dot should be in the middle of the glass mostly. You are not using the iron sights. Not unless the red/green dot stops working. This is a pistol not a rifle. So either you are sharing a completely different point of view from the police trainers I've seen or it's just wrong. I'm confused. Not looking to contradict just to clarify your point of view here.
Man I’ve watched this twice over and the takeaway I’m getting is move your irons to the group? Or your screws move the dot to the group? Boutta give it another watch and still be fuckin lost😂, i have suppressor height sights on my g19 clone with a holosun 407c on it and i fr just out of the box slapped it on, moved the dot right above my irons took it outback and sure enough, pristine chefs kiss and on target from around 10-15 yards I’d say, idk video just has me lost asf🤷🏼♂️
A better way to describe it ( the reverse) and remember it is to "take the iron sights to the dot"
Thank you 👍🏽👍🏽👍🏽👍🏽
It seems my dot changes position depending on the angle that I look at it
And here I thought I was crazy because I noticed it when using a boresight. “Everybody puts their markings on backwards”, I’m such an idiot💀💀
What about if you don't have rear sight to co-witness?
I think mine is defective it won't go down to touch the top of the front iron site. No matter what I do.
Sweet thanks. I’ll give it a try
What if your Red Dot Optic is mounted without the Rear Sight installed?
The way I zero the Red Dot is with a laser bore sighter just pick a distance you're comfortable with for me I did a home defense zero at 14 yrds the distance from my bedroom to my den. Clamp your handgun in something to keep it from moving . Put a bullet laser bore sighter in the barrel, at your preferred distance adjust your optic's red dot so that it's on top of the laser bore sighter dot. I hope that helps you.
I wish I had watched this video before hitting the range.
How far back are you standing while making these adjustments
So the dot has to be on the front sight?
No matter what I do I can get mine to work for me g19 gen3 with a trijicon SRO. Not milled, mounted where the stock rear sight would be. I can line the dot with the front sight. I’m also a newbie. What am I doing wrong?
More confused then ever before..but excuse my ignorance cause I’m brand new in the gun game. So I got my gun, iron sights are lined up pretty good. I add a red dot now. Looking thru the red dot now why can’t I just adjust the dot if need be to the center of screen and be good to go!??