I went to the range and all of sudden noticed my red to was gone. This saved my life! Didn't know a battery was every needed. I thought it would last forever. Thanks for vid!
I was gonna make it a range gun because I have like theee edc’s to choose from, so I wanted to go a different route and for the shroud I really wasn’t felling it, it made it look weird in my opinion but it did run around 170 so if it is a edc, I would recommend putting the shroud
You should have taken the slide off the grip module. Check your weapon at least to make sure you're not loaded, also never put your finger on the trigger until you are ready to destroy something.
I went to the range and all of sudden noticed my red to was gone. This saved my life! Didn't know a battery was every needed. I thought it would last forever. Thanks for vid!
....bros finger was all over that trigger lol
Question: what screw driver do you use to remove the top plate cover?
I think I used a hex I bought the tool kit at Walmart it had small bits in it
Can this fit a Glock 17 5th gen ??
Which size is the tool to pull the 2 screws up?
Tbh not sure I have a random hyper tough 65 piece screwdriver but set and it had everything I needed I know it’s Walmart but it comes in handy
use T10 screw bit and i used my drill
Why you did not install the included shroud?
You don’t have to but if you want to, it’s the same process but all you have to do is align the shroud
@@awannabewithagun2975 Understood. What was you thought process. Why you decide no to install? Not pushing I just want to learn as I will buy one too!
I was gonna make it a range gun because I have like theee edc’s to choose from, so I wanted to go a different route and for the shroud I really wasn’t felling it, it made it look weird in my opinion but it did run around 170 so if it is a edc, I would recommend putting the shroud
And if you do get one you got to press the button hard as hell for some reason, I really didn’t like that about it
@@fronterae adds unwanted height
Were you able to zero it? Red dot is so far to the right
Yes it zeroed I went to the range with it and shot wherever I aimed
It probably looks like that in the video because of the angle 📐
Mine came out of the box the same way! All the way right in the corner and won't move
You should have taken the slide off the grip module. Check your weapon at least to make sure you're not loaded, also never put your finger on the trigger until you are ready to destroy something.
My light will not stay on
If the battery isn’t flush with it it won’t stay on make sure when you install that the battery is on the right way and your screwing it on right
Say um. One more goddamn time I dare you
Ummm
😂😂😂@@awannabewithagun2975