2013
ฝัง
- เผยแพร่เมื่อ 14 ก.พ. 2023
- removal and replacement of thermostat the temp gauge was not coming to normal temp this was the fix.
tools: @MilwaukeeTool cordless ratchet
screw drivers
15mm socket deep
10mm socket
10mm wrench
duralast ratchet
job time: 1hour - ยานยนต์และพาหนะ
Thanks for uploading a video and taking extra time to help others understand the steps.
U welcome
Thanks for your time in uploading this video. I have a Chevy Cruze that has a similar housing.
U welcome
Appreciate the video
U welcome
Thanks for making the video. It was good camera work knowing how tight everything is down there. I'm just going to bite the bullet as it looks like more than I'm willing to put in time wise. Thanks brother
You welcome its tight for sure.
For compressing the thermostat spring to get in the slots on the housing you can use a socket and extension to compress it then turn the ears in the slots with pliers or flathead.
That work as well more then 1 way to skin a cat. Thank u for the feedback
@samedayautodetroit So when putting the thermostat insto the housing there ahould have been a tube (its called an insert tool).that you use to push down on the spring and then turn to get the thermostat tabs under the housing tabs 13:48
I used 2 screwdrivers and pliers to set it
Thanks
You welcome
W video! what gave you the idea to replace it. we got the same car engine temp seems to go up and seeing smoke intermittently. this seems simple as a first step to try and replace
Her temp was going up and down
@@samedayautodetroit thanks! once you got a new one installed do you need to add coolant and bleed the system?
@@kalebcantrell7468 add coolant for sure. It was good
Should I replace the housing at the same time?
yes why u got it apart.
How did you get that bottom bolt out? Its too long theres no room for it to come out
Which ones
Good video but it's a lil too dark
That's some funny shit
😩😩 I need you
U need car help?
Yes but I’m no where near Detroit 😩.
My nigga💯💪🏾
Pericate you fam i do it for the ppl.
@@samedayautodetroit definitely came through clutch
@@tommymills576 i do all kinda work so keep a eye out. That job was some bs i remember it. With that video its very hard job.
Where is the part when you take it out you skipped that
Which part
My shop wants $306 bucks. Had to come here to see what I was paying for 😅
Yeah he’s not asking for much for all that finagling. I’m sure it’s a little easier when you can use both hands, but that’s a lot of work. Plus the time it takes to drain it before… thanks for the video man! I learned a lot! ❤
yes it is alot of work for sure. they earning there money for sure.