96 Chevy Truck Fuel Pump Replacement
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2020
- Join us as we replace the fuel pump and sender (hanger unit) on this 1996 Chevrolet truck with the 5.7L engine.
Disclaimer:
Due to various factors and design differences in today’s vehicles, this channel, Mr. Locker and/or all parties involved in the production of this video cannot guarantee the accuracy or validity of the information presented in this video. Therefor no party involved with the production of this video shall be liable for any damages or injuries of any type or form that result from any party watching, discussing, or using the procedures outlined in this video or any other videos on the “Locker's Garage” channel.
As always, we recommend safe working practices including proper vehicle lifting, personal protective equipment, and following the procedures outlined in the shop manuals when performing any type of service work.
Due to factors beyond our control, no information in this video shall create any warranty either expressed or implied in any way, shape, or form. By watching, discussing, or using any part of this video production, you and your associated parties agree to the terms stated above.
This video is for entertainment purposes only. - ยานยนต์และพาหนะ
Thanks! Helped me get my fuel pump swapped out
Great camera work and good instruction! I was able to change my fuel pump on my 1997 K1500 using yours and a few other videos. The hardest part was reattaching the fuel hoses at the tank. Not much room to maneuver! 26 years old at 276k (125k since I overhauled the engine.) Thank you!
Very helpful and you have a great attitude. Thank you.
Thank you!
Or you could loosen the bolts holding the right side of the bed on, remove the bolts holding the left side of the bed on and jack up the left side of the bed. This should give you access to the top of the tank. Maybe.
Great GMC fuel pump tuitional!
I just installed the fuel pump in my 97 Sierra
You're done at the hard way son
Great video! Toyota Rubber grease is the hot ticket for injector o rings or for seating sensitive gaskets 10$ for a tube at the dealer ! its one of my favorite products i use 🤝
I made a little hatch for in the bed for my replacement. Easy to get to and minimal work needed to get the job done. It's my work truck anyways so it isn't the only battle scar she has
you have got to be in Colorado somewhere i know those tumbleweeds from anywhere!! Colorado Springs saying howdy neighbor and thanks for the great video i just replaced my fuel pump and thanks to your video everything went flawlessly!! except my lady made me sleep on the couch even after 2 showers cuz i smelt like gas all night... (gasoline and man gas!!LOL) could you possibly do a video on how to fix the blend doors mine does not go to the footwell and also clicks when switching. mine also makes squeaking noises randomly sometimes... would love some help if you got the time!! Thanks
Also I’m putting a new female plug connector on , old one a little corrosion,
I cut off the 3 wires from the female connector & now can’t find the old one to match the 3 colored wires to reinstall the new female connector
(new connector came with 3 black wires)
Any help on getting the 3 wires correct?
Why not just lift the bed off the truck? It’s only 8 bolts and disconnect the tail lights....very easy. Although, you do need to remove the spare tire as well.
Already had it easy by having a lift. Why not unbolt the bed and lift it off the truck
Will a 05 Silverado 4x4 fuel pump fit a 96 Silverado 4x4 Both are 1500 thought I'd ask before buying one thanks
I was surprised to see this pump in this truck. My dad's 99 GMC took the $400 white plastic module style that the new ones all take. A fuel delivery module.
Wow!
It seems you could had removed the 8 bed bolts after lifting the truck.
Fasten the bed to something above and then lower the truck back down.
Yes there are the filler bolts, ground wire and the tail lights.
After the replacement, in theory, raise the truck back into place.
That is an idea I would like to see correctly achieved.
What do you guys, and gals, and non-gender... think. Plausible?
And while you have the bed off you could easily do.....
Do not do this job without replacing the rubber hose.