How To Replace Fuel Tank 1988-2000 Chevy C/K1500

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ต.ค. 2021
  • Buy Now!
    New Fuel Tank Kit from 1AAuto.com 1aau.to/ic/1AFRK00116
    A rusted, banged up, punctured, or leaking fuel tank could be bad news. If your truck needs a new fuel tank, you can install this model specific replacement tank from TRQ. This video shows you how to install a new TRQ fuel tank made specifically to fit your 1988-2000 Chevy C/K1500.
    • Check here for more videos on the 1988-2002 Chevy K1500 • Chevy K1500 Pickup 198...
    This process should be similar on the following vehicles:
    1988 Chevrolet K1500 Truck
    1989 Chevrolet K1500 Truck
    1990 Chevrolet K1500 Truck
    1991 Chevrolet K1500 Truck
    1992 Chevrolet K1500 Truck
    1993 Chevrolet K1500 Truck
    1994 Chevrolet K1500 Truck
    1995 Chevrolet K1500 Truck
    1996 Chevrolet K1500 Truck
    1997 Chevrolet K1500 Truck
    1998 Chevrolet K1500 Truck
    1999 Chevrolet K1500 Truck
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
    • 15mm Wrench 1aau.to/oa/1AXAA00010
    • 15mm Socket 1aau.to/oa/1AXAA00015
    • Air Blow Gun
    • Cutoff Wheel 1aau.to/oa/1AXAA00254
    • Hose Clamp Pliers 1aau.to/oa/1AXAA00076
    • Ratchet 1aau.to/oa/1AXAA00016
    • Socket Extensions 1aau.to/oa/1AXAA00015
    • Brass Punch
    • Hammer 1aau.to/oa/1AXAA00091
    • Pick 1aau.to/oa/1AXAA00037
    • Wire Brush 1aau.to/oa/1AXAA00079
    Subscribe: / @trq
    Check out our playlist:
    Chevy K1500 Pickup 1988-2002: • Chevy K1500 Pickup 198...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 43

  • @TRQ
    @TRQ  2 ปีที่แล้ว +4

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

  • @stevecarlson6462
    @stevecarlson6462 ปีที่แล้ว +41

    I never realized what an easy job this is. I just need to install a lift and buy a transmission jack. Simple!

  • @jamesball2652
    @jamesball2652 ปีที่แล้ว +11

    Well I got the job done but doing it while laying on the ground is not fun but I had to do what I had to do, thanks for the pointers guys it did help.

  • @ronhampe
    @ronhampe ปีที่แล้ว +7

    If I had a lift this video would be great. I have also found from watching some of your other videos that you conveniently fast forward when installing the hard to reach parts.

  • @Grumpygus94
    @Grumpygus94 2 ปีที่แล้ว +47

    Step 1: buy a lift

  • @raymerck7979
    @raymerck7979 ปีที่แล้ว +6

    I took the bed off to get mine out I definitely advise you pop the for bolts out and take the bed off it gives a lot more room

  • @biff314
    @biff314 ปีที่แล้ว +4

    Of course the range of years was provided as those years have many similarities. What was not identified that would be helpful is the model year they are working on in this video. Early on, judging by the mirror, the truck is a 1994 model or older.
    I believe that after 1997? ... GM changed the fuel connections to quick connects which requires a completely different set of tools (if you want to keep from damaging the fittings) in order to disconnect the hose fittings from the tank.
    Then it may be a surprise if dropping your tank using this video.

  • @Gabriel-ib8lt
    @Gabriel-ib8lt ปีที่แล้ว +4

    You guys make great videos, thank you

  • @alis4700
    @alis4700 2 ปีที่แล้ว +2

    Good work. thanks for this video

  • @kenshobby5191
    @kenshobby5191 2 ปีที่แล้ว +3

    This guy sounds like Chris Fix. Great video!

  • @gerlandkent6377
    @gerlandkent6377 2 ปีที่แล้ว +3

    thank, you for you're video.🙏

  • @americanwhiteboy715
    @americanwhiteboy715 9 วันที่ผ่านมา

    Would love to know if this would fit my 96 Chevy Tahoe k1500 5.7 l SUV factory one is discontinued

  • @terrydawkins9936
    @terrydawkins9936 ปีที่แล้ว +1

    Excellent very clear,,,,makes it look s easy

  • @markmoore4088
    @markmoore4088 8 หลายเดือนก่อน +1

    Seems like replacing the old rubber hoses would be smart while its out.

  • @louf7178
    @louf7178 8 หลายเดือนก่อน

    Quality video. Excellent.

  • @Henrylxt
    @Henrylxt 2 ปีที่แล้ว +2

    What part number is the fill hose for the stepside?

  • @vileloxter62
    @vileloxter62 2 ปีที่แล้ว +2

    What is the hanging ground cable for in 16:10 ? Mine is ripped hanging will it effect anything

  • @FishinAround828
    @FishinAround828 10 หลายเดือนก่อน +1

    My tank I ordered doesn’t have the flange that the lock ring locks In already attached to the tank but has it separate. How can I install that outer flange into the tank ? Epoxy or ?

  • @mjadams4272
    @mjadams4272 11 หลายเดือนก่อน +2

    6:22 into the video - what's going on in those safety glasses? Foggy much?

  • @linolemus610
    @linolemus610 2 หลายเดือนก่อน

    I have a 2001 it’s a one year difference, would this fit?

  • @danielgatto5500
    @danielgatto5500 ปีที่แล้ว +1

    Will this video apply to a 1999 k2500?

  • @tnbasscat
    @tnbasscat ปีที่แล้ว +2

    What size bolt did you use...

  • @dukedawg2288
    @dukedawg2288 ปีที่แล้ว +2

    Nice video clear and concise 😊

  • @lackoficko2242
    @lackoficko2242 2 ปีที่แล้ว +2

    Thank you.
    I have a RV 1988 Chevy G3o 5.7
    I can not gaz up But now I have to get under .Can you belive these some of us have to do these in 0 degrees whether ?

    • @lackoficko2242
      @lackoficko2242 2 ปีที่แล้ว +2

      Not only that they close the keystone pipline,pipeline, wee have to pay 3× more.way my dear Americans???
      Becose you let yourself go...way ??, Wee are the people,wee are life,wee ar3free.

    • @lackoficko2242
      @lackoficko2242 2 ปีที่แล้ว +1

      are free. You Help us please

  • @gerlandkent6377
    @gerlandkent6377 2 ปีที่แล้ว +1

    I've got a 1989, GMC 1500 4x4 short bed TRUCK. 350 vortex

  • @camdenboyle7551
    @camdenboyle7551 2 ปีที่แล้ว

    First what else is being replaced on this truck?

  • @donaldbattle4
    @donaldbattle4 2 ปีที่แล้ว +1

    great vid but only if i had a lift it would make it so much easier

  • @johnboyreynolds401
    @johnboyreynolds401 2 ปีที่แล้ว +1

    Guys my gas gauge don't work. I filled up Friday, pumped 30 and a half gallons. I was running on fumes lol

  • @bannoch
    @bannoch 2 ปีที่แล้ว +1

    My fuel gauge reads above full and doesn’t move, I was wondering if the ground wire for the tank would cause that or the wiring from the tank

    • @donp2474
      @donp2474 ปีที่แล้ว +4

      I just saw another video about this and he did say that if your fuel gauge always shows over full that it is the ground wire.

    • @paulwickey1688
      @paulwickey1688 ปีที่แล้ว +1

      I was wondering that too, because I have the same exact issue.

  • @alexanderstefanxandraswedi5835
    @alexanderstefanxandraswedi5835 2 ปีที่แล้ว +1

    Great

  • @oldbiker9739
    @oldbiker9739 ปีที่แล้ว +1

    at least GM had steel lines right in to the pump , to day they use plastic lines in the tank to the pump that crack or blow off , Q C is out to lunch , never by an other pump but AC Delco or Delphi . ask me I know .

  • @trinityrussell7932
    @trinityrussell7932 2 ปีที่แล้ว +3

    Anyone know what size the nut on the inside of the frame is for the first bolt he took off with the 15mm?

    • @gerardoduran9066
      @gerardoduran9066 ปีที่แล้ว +2

      That's a C-clip with a nut welded to it. In other words it's a two in one that goes clipped onto the the chassis frame, if you lost that C-clip,, you can always check your local junk yard for one or see if you can find one online. Best of luck.

  • @SPRDAVE
    @SPRDAVE ปีที่แล้ว

    i wanted to see how you remounted that dam bracket wtf 2nd one you showed and was it option to replace weird

  • @johnboyreynolds401
    @johnboyreynolds401 2 ปีที่แล้ว +1

    I have a 91 gmc

  • @juli0cesarrobles738
    @juli0cesarrobles738 2 ปีที่แล้ว

  • @treybutler3766
    @treybutler3766 3 หลายเดือนก่อน

    How do you do it without lift 😂

  • @gerlandkent6377
    @gerlandkent6377 2 ปีที่แล้ว +1

    if I ever have to go THREW this I'm just going to cut a hole in the bed floor.

  • @montanamaxim9293
    @montanamaxim9293 ปีที่แล้ว +3

    Step one- be a man and do it your self.